Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Tue Aug 12, 2025 2:53 pm


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 23 posts ] 
Author Message
PostPosted: Mon Jun 27, 2011 7:45 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Mar 22, 2007 10:59 pm
Posts: 2103
Location: Bucharest, Romania
Country: Romania
Focus: Build
Status: Professional
I ordered a couple tops recently (not here yet) and while reading about the stuff, it seems to pop out often that it splits easily. How easily is that in fact? I build classicals...a dense top can end up at 0.08 in thickness, and I also use a very pronounced dome, of about 15' or so. I hope it is not going to split when gluing the braces! eek

_________________
Build log


Top
 Profile  
 
PostPosted: Mon Jun 27, 2011 8:11 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Sep 09, 2005 7:51 am
Posts: 3786
Location: Canada
It tends to split when flexing cross grain .. long grain is fine ... handle gently, it will brace up fine, and then you are good to go.

_________________
Tony Karol
www.karol-guitars.com
"let my passion .. fulfill yours"


Top
 Profile  
 
PostPosted: Mon Jun 27, 2011 8:24 am 
Offline
Mahogany
Mahogany
User avatar

Joined: Tue Nov 11, 2008 5:36 pm
Posts: 68
First name: Edzard
Last Name: Kolks
City: Eindhoven
Country: The Netherlands
Focus: Build
Alexandru Marian wrote:
I ordered a couple tops recently (not here yet) and while reading about the stuff, it seems to pop out often that it splits easily. How easily is that in fact? I build classicals...a dense top can end up at 0.08 in thickness, and I also use a very pronounced dome, of about 15' or so. I hope it is not going to split when gluing the braces! eek


Hello Alexandru,

I ordered 5 pieces. When they arrived I took one out for flexing it (only a little bit) and it broke in two pieces.

After a while I used one for a steelstring. Got the rosette in, then glued the purflings around it with CA. I sealed everything (twice) with shellac. Stains everywhere.Through the top away.

Yesterday I took the third piece, put in a (very nice burl) rosette. Glued it with Fish glue. No stains.

Then to the saw, during sawing I slipped and fel with my elbow on the top...it broke in two.

Maybe someone up there is trying to tell me not to use redwood...




Best regards,


Edzard


Top
 Profile  
 
PostPosted: Mon Jun 27, 2011 9:28 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Mar 22, 2007 10:59 pm
Posts: 2103
Location: Bucharest, Romania
Country: Romania
Focus: Build
Status: Professional
Thanks everyone. Edzard, if that is any consolation, I suppose even the hardest spruce would have split after an elbow impact.

Well seems I need to keep my fingers crossed! I'll see how they pass the offcut test. For every top I saw off about an inch of endgrain and split in many pieces. Helps finding weak grains and getting the "feel of the wood"

_________________
Build log


Top
 Profile  
 
PostPosted: Mon Jun 27, 2011 12:04 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Oct 30, 2007 9:13 am
Posts: 1168
Location: United States
State: Texas
Focus: Repair
Status: Professional
I too have been afraid of splitting Redwood, because it IS fragile, but the instruments that I've used it on, once together, have been fine after many years, and the tone is worth it.

_________________
https://www.facebook.com/profile.php?id=100008907949110


Top
 Profile  
 
PostPosted: Mon Jun 27, 2011 12:15 pm 
Offline
Koa
Koa
User avatar

Joined: Wed Jan 23, 2008 8:05 pm
Posts: 1567
Location: San Jose, CA
First name: Dave
Last Name: Fifield
City: San Jose
State: CA
Zip/Postal Code: 95124
Country: USA
Focus: Build
Status: Amateur
I've ruined a couple of sinker redwood sets by taking them too thin. As the others have said, it's not so strong across the grain. You will not be able to get your top anywhere near 0.08" IMO. I would stop at 0.115" and brace appropriately. YMMV. Good luck!

Dave F.

_________________
Cambrian Guitars

"There goes Mister Tic-Tac out the back with some bric-brac from the knick-knack rack"


Top
 Profile  
 
PostPosted: Mon Jun 27, 2011 1:03 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Mar 22, 2007 10:59 pm
Posts: 2103
Location: Bucharest, Romania
Country: Romania
Focus: Build
Status: Professional
Thanks guys. I am going to try the thickest top/lightest bracing scheme I can come with, although something like 0.115 might be way too heavy. Will see how the actual top behaves. Factoring in the guitar size, I would say a 0.08-0.085 classical spruce top is about the same as a .105-.11 Dread top.

_________________
Build log


Top
 Profile  
 
PostPosted: Sat Jul 02, 2011 1:08 pm 
Offline
Koa
Koa
User avatar

Joined: Sat Mar 07, 2009 7:56 am
Posts: 1825
Location: Grover NC
First name: Woodrow
Last Name: Brackett
City: Grover
State: NC
Zip/Postal Code: 28073
Country: USA
Focus: Build
I don't have much Redwood, and have only built with it twice, but I believe it's alot stronger/stable/less likely to split if it's prefectly quartered. I (think I) read somewhere that it's more prone to split if it isn't dried correctly.........maybe dried too fast????

_________________
I didn't mean to say it, but I meant what I said.
http://www.brackettinstruments.com/


Top
 Profile  
 
PostPosted: Sat Jul 02, 2011 1:39 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Mar 22, 2007 10:59 pm
Posts: 2103
Location: Bucharest, Romania
Country: Romania
Focus: Build
Status: Professional
I ordered from Rick, and they seem to be pretty well quartered, as there is long silk visible in the photos here and there. I should have them in a week or so and I will return with a report.

_________________
Build log


Top
 Profile  
 
PostPosted: Sat Jul 02, 2011 4:57 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Dec 17, 2010 6:22 pm
Posts: 1295
First name: Miguel
Last Name: Bernardo
Country: portugal
Focus: Build
Status: Semi-pro
sorry for the (dumb?) question, but what is sinker redwood? redwook that has been sank?

thanks,
miguel.

_________________
member of the guild of professional dilettantes


Top
 Profile  
 
PostPosted: Sat Jul 02, 2011 5:13 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Dec 17, 2010 6:22 pm
Posts: 1295
First name: Miguel
Last Name: Bernardo
Country: portugal
Focus: Build
Status: Semi-pro
thanks for the detailed (and quick!) reply Filippo. so it just happened by chance that some logs sank? here (portugal, EU) some loggers keep their wood for some years in rivers (mainly white oak, i believe), saying that it turns the wood "better" (which i translated at the time as "stronger" or "more durable"), but i thought it could be just a case of wishful thinking. do you know if this is done with other woods (that is, woods used in guitar making)?


thanks,
miguel.

_________________
member of the guild of professional dilettantes


Top
 Profile  
 
PostPosted: Sat Jul 02, 2011 8:21 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Mar 01, 2011 1:32 pm
Posts: 3470
First name: Alex
Last Name: Kleon
City: Whitby
State: Ontario
Zip/Postal Code: L1N8X2
Country: Canada
Focus: Build
Status: Amateur
There is quite an industry of reclaiming logs that were floated to mills. Many are not only on the bottom of rivers, but sunk in mud where the rivers have changed their direction over the years. Old growth pine that has been reclaimed is much saught after. I would think that there must be sitka spruce reclaimed the same way in British Columbia as well. Maybe someone else knows for sure.

Alex

_________________
"Indecision is the key to flexibility" .... Bumper sticker


Top
 Profile  
 
PostPosted: Tue Jul 19, 2011 9:17 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Mar 22, 2007 10:59 pm
Posts: 2103
Location: Bucharest, Romania
Country: Romania
Focus: Build
Status: Professional
I just got my two soundboards. It doesn't really seem much worse than WRC in terms of hardness and splitting. On the other hand they are quite very heavy, one at 450Kg/m3 (7.37 grams/cubic inch) the other 490 (8grams). The 450 is also stiffer. Both are well quartered, with lots of silk. The heavy one has the rings so tight you can't count them.

I am thinking I could make an all-redwood guitar and use the heavy piece for the back, if I could get some long stock for sides somewhere. Hmmm.


You do not have the required permissions to view the files attached to this post.

_________________
Build log


Top
 Profile  
 
PostPosted: Tue Jul 19, 2011 9:35 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Dec 17, 2010 6:22 pm
Posts: 1295
First name: Miguel
Last Name: Bernardo
Country: portugal
Focus: Build
Status: Semi-pro
Hi Alexandru, could you tell me where you got the tops from? and how do they tap? it looks nice...

cheers,
(a curious) miguel.

_________________
member of the guild of professional dilettantes


Top
 Profile  
 
PostPosted: Tue Jul 19, 2011 10:24 am 
Offline
Site Admin
User avatar

Joined: Mon Dec 27, 2004 5:02 am
Posts: 8555
Location: United States
First name: Lance
Last Name: Kragenbrink
City: Vandercook Lake
State: Michigan
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro
What Tony said!

I had a top 1/2 split on flexing it cross grain just as Tony says.

TonyKarol wrote:
It tends to split when flexing cross grain .. long grain is fine ... handle gently, it will brace up fine, and then you are good to go.

_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com


Top
 Profile  
 
PostPosted: Tue Jul 19, 2011 11:49 am 
Offline
Contributing Member
Contributing Member

Joined: Tue May 18, 2010 6:42 pm
Posts: 589
First name: Brian
Last Name: Itzkin
State: NY/Granada
Country: USA/Spain
Focus: Build
Alexandru Marian wrote:

I am thinking I could make an all-redwood guitar and use the heavy piece for the back, if I could get some long stock for sides somewhere. Hmmm.



Or you could get some rosewood sides and try out a kasha style like this Boaz/Majkowski [:Y:]
http://www.dreamguitars.com/detail/1739-boaz_majkowski_kashaschneider_concert_guitar_lisa_5/


Top
 Profile  
 
PostPosted: Tue Jul 19, 2011 12:50 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Mar 22, 2007 10:59 pm
Posts: 2103
Location: Bucharest, Romania
Country: Romania
Focus: Build
Status: Professional
Miguel,
From here: http://www.luthierscooltools.com/Sinker_Gallery.htm
The tap tone is very nice, low damping and resonant like WRC, but a bit more restrained, and I suppose this is because of the weight. Because of the same weight, I would not recommend this stuff for a classical, unless you ask them to pick one which is noticeably light (and wide grained maybe). I picked a couple based on looks (uniform enough) and were not too big and pricey...

Oval,

Thanks! Rosewood might be. In fact I used a lighter brown orangeish type of Madagascar rw before that might work just fine. Perhaps bending sinker or redwood in general is not a great idea, not to mention later issues because of the fragility...

_________________
Build log


Top
 Profile  
 
PostPosted: Tue Jul 19, 2011 1:02 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Dec 17, 2010 6:22 pm
Posts: 1295
First name: Miguel
Last Name: Bernardo
Country: portugal
Focus: Build
Status: Semi-pro
thanks for the info! i wish you good luck with your future sinker endeavours!

edit: BTW, that kasha looks awesome, but i imagine - even considering mr. Heumiller remarks - that it should be difficult to play in the eupper frets... i mean, those are really up!

_________________
member of the guild of professional dilettantes


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 23 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: Chris Ide and 33 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com