Official Luthiers Forum! • View forum

All times are UTC - 5 hours

Topics		Author	Replies	Views	Last post
Active topics
	Building A Little Baroque Rating:1.57% [ Go to page: 1, 2 ]	Ken Nagy	41	2055	Sun Jul 12, 2020 2:42 pm TimAllen
	safety wire for bolt on necks Rating:1.57%	Tai Fu	16	423	Sat Jul 11, 2020 9:02 pm Terence Kennedy
	Martin OM plans/templates differences Rating:1.57%	Colin North	10	297	Sat Jul 11, 2020 6:49 pm Colin North
	strategies for doing "involved" inlay Rating:1.57%	SnowManSnow	13	384	Sat Jul 11, 2020 11:22 am Alan Carruth
	British timbers Rating:6.3% [ Go to page: 1, 2 ]	Fire frogs	32	697	Sat Jul 11, 2020 8:57 am Ruby50
	Strategies for avoiding too-thin bindings Rating:6.3% [ Go to page: 1, 2 ]	doncaparker	44	1027	Fri Jul 10, 2020 12:04 pm Dave m2
	I hate cracks Rating:1.57%	Herr Dalbergia	14	516	Fri Jul 10, 2020 11:21 am Herr Dalbergia
	Small body archtop	Cas	8	240	Fri Jul 10, 2020 9:24 am Terence Kennedy
	Build started Rating:5.51% [ Go to page: 1, 2, 3, 4, 5 ]	banjopicks	101	29433	Thu Jul 09, 2020 1:38 pm doncaparker
	Go bar deck adjustability improvement Rating:0.79%	doncaparker	20	1914	Thu Jul 09, 2020 10:10 am doncaparker
	Bending wood with water and a bending machine Rating:0.79%	PortlandGuitar	21	664	Thu Jul 09, 2020 7:07 am BobHowell
	Mahogany Van Eps/L-00 project	ballbanjos	9	355	Thu Jul 09, 2020 5:25 am ballbanjos
	Bondo? For pore fill?	Dave Livermore	21	969	Wed Jul 08, 2020 4:37 pm B. Howard
	guitar electronic with onboard EQ	Tai Fu	2	189	Tue Jul 07, 2020 2:48 pm Colin North
	Cheap flush trim bits Rating:1.57%	bcombs510	6	361	Tue Jul 07, 2020 2:09 pm Clay S.
	Classifieds sign up issues. Rating:5.51% [ Go to page: 1, 2, 3 ]	LanceK	51	125551	Tue Jul 07, 2020 1:31 pm amarillo2011
	Acoustic Guitar Bridge Retrofit and Jig Creation Rating:1.57%	PortlandGuitar	23	831	Tue Jul 07, 2020 10:01 am Tai Fu
	Red Spruce - in the wild	jfmckenna	14	550	Mon Jul 06, 2020 8:20 am jfmckenna
	Douglas Fir as a tonewood Rating:6.3%	DanKirkland	8	539	Mon Jul 06, 2020 4:57 am Herr Dalbergia
	Finishing with the neck on Rating:0.79%	Pegasusguitars	14	493	Sun Jul 05, 2020 10:31 am Tim Mullin
	Dark North American wood for headplate (not walnut) Rating:0.79%	Bill Higgs	23	908	Sat Jul 04, 2020 7:38 pm Mark Mc
	EIR Dred - Recent build and sound clips Rating:10.24%	bcombs510	16	546	Fri Jul 03, 2020 10:30 pm George L
	Madrone Flamenco Hybrid. Rating:3.94% [ Go to page: 1, 2, 3 ]	Bruce Sexauer	69	3403	Fri Jul 03, 2020 9:57 pm Bruce Sexauer
	Catalpa archtop Rating:2.36% [ Go to page: 1, 2 ]	oatesguitars	38	6016	Fri Jul 03, 2020 9:43 pm oatesguitars
	Frankenstein build Rating:0.79%	SnowManSnow	13	602	Fri Jul 03, 2020 2:31 pm SnowManSnow
	Performax/Jet 10-20 Drum Sander Repair Rating:4.72%	George L	15	551	Thu Jul 02, 2020 8:38 pm James Orr
	Is this bearing ok? Rating:1.57%	SnowManSnow	13	604	Thu Jul 02, 2020 8:06 pm SnowManSnow
	It seems I’m in good company... Rating:2.36%	meddlingfool	9	471	Thu Jul 02, 2020 6:38 am Clay S.
	Bending Iron Rating:3.94% [ Go to page: 1, 2 ]	gregorio	25	1599	Wed Jul 01, 2020 6:39 pm joshnothing
	Starting Over Rating:14.17% [ Go to page: 1, 2 ]	ballbanjos	32	2506	Tue Jun 30, 2020 9:49 pm Clay S.
	The Oops what a dum-dum tread: Rating:5.51% [ Go to page: 1, 2, 3, 4 ]	jfmckenna	91	6422	Tue Jun 30, 2020 5:56 pm joshnothing
	New Build, Action Move?	Ken Nagy	2	205	Tue Jun 30, 2020 5:32 pm Ken Nagy
	New spectrum Analysis software: Beta testers wanted Rating:2.36%	Alain Lambert	21	4460	Mon Jun 29, 2020 2:41 pm Pat Foster
	Tips on bending Rating:6.3%	DanKirkland	14	726	Mon Jun 29, 2020 1:50 pm DanKirkland
	There are no shortcuts… Rating:0.79%	Brad Goodman	9	502	Sun Jun 28, 2020 7:20 pm Brad Goodman
	Identifying wood Rating:0.79%	Ruby50	5	359	Sun Jun 28, 2020 12:14 pm Dave m2
	Bridge causing top deformation Rating:14.96% [ Go to page: 1, 2 ]	bcombs510	27	1368	Sun Jun 28, 2020 8:55 am bcombs510
	Time To Go And Wishing Everyone The Best of Lutherie Success Rating:21.26% [ Go to page: 1, 2 ]	Hesh	26	1492	Sat Jun 27, 2020 2:38 pm JSDenvir
	Mixing very small amounts of epoxy Rating:0.79%	Pegasusguitars	19	847	Fri Jun 26, 2020 12:37 pm bluescreek
	Old bending iron problems Rating:1.57%	DanKirkland	5	282	Thu Jun 25, 2020 5:13 pm DanKirkland
	Initial string height	talladam	4	232	Thu Jun 25, 2020 2:44 pm talladam
	Epoxy For Fretboards Rating:5.51% [ Go to page: 1, 2 ]	Terence Kennedy	29	2827	Mon Jun 22, 2020 10:23 pm bcombs510
	Sinker Redwood and bracing. Rating:3.15%	nathanpeirson	6	487	Mon Jun 22, 2020 12:46 pm Clay S.
	Drop(ped) Top	Mark Chinworth	11	565	Mon Jun 22, 2020 12:43 pm Jim Watts
	Engine troubles... Rating:1.57%	meddlingfool	17	805	Fri Jun 19, 2020 11:01 pm meddlingfool
	1930's OM Martin Pickguard Rating:4.72%	jfmckenna	16	875	Fri Jun 19, 2020 12:52 pm toddb
	Anyone heard from Haans? Rating:11.81%	DanKirkland	18	1468	Fri Jun 19, 2020 7:33 am Ernie Kleinman
	Pore filling with epoxy Rating:1.57%	Roy	14	680	Fri Jun 19, 2020 7:19 am Clay S.
	Target Emtech Ultraseal WB Shellac sealer- something strange	pullshocks	16	827	Thu Jun 18, 2020 8:21 pm JimWomack
	Split Saddle Bridge and Nut Rating:2.36%	PortlandGuitar	11	570	Wed Jun 17, 2020 11:01 pm PortlandGuitar


Forum	Topics	Posts	Last post
	Guitar Building Forum Main discussion area. All topics related to building acoustic guitars! Sponsored in part by http://www.alaskawoods.com/ !	27153	377087	Sun Jul 12, 2020 2:42 pm TimAllen
	Neck Jig Development forum Private forum for development of Neck Jig. Neck Jig plans will be available soon.	5	32	Fri May 31, 2019 6:33 pm Barry Daniels

Forum

Topics

Posts

Last post