Clear pickguard material needed?

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

Clear pickguard material needed?

Page 1 of 1

[ 6 posts ]

Print view

Previous topic | Next topic

Author

Message

Brad Way

Post subject: Clear pickguard material needed?

Posted: Fri Jun 17, 2011 10:10 pm

Koa

Joined: Tue Jul 04, 2006 3:24 am
Posts: 744
Location: United States

I am looking for some clear pickguard material. I was told that LMII had it but could not it on their site. Any ideas where I can locate some?

_________________
Brad
Avon, OH

Top

unkabob

Post subject: Re: Clear pickguard material needed?

Posted: Fri Jun 17, 2011 10:34 pm

Koa

Joined: Sat Nov 07, 2009 9:34 pm
Posts: 552
City: winnipeg
State: manitoba
Country: canada
Focus: Build
Status: Amateur

I have heard that some builders use "Frisket" (stick-on). It should be available at drafting supply stores and could be at office supply stores. I do not know how the adhesive would affect your guitar finish so try it on a finished sample for a week or two to check.

Bob

Top

Heath Blair

Post subject: Re: Clear pickguard material needed?

Posted: Fri Jun 17, 2011 10:40 pm

Koa

Joined: Fri Feb 16, 2007 12:14 pm
Posts: 1066
First name: Heath
Last Name: Blair
City: Visalia
State: California
Country: USA
Focus: Build
Status: Amateur

http://www.lmii.com/CartTwo/thirdproduc ... ard+Sheets

_________________
sweat the small stuff.

Top

Colin S

Post subject: Re: Clear pickguard material needed?

Posted: Sat Jun 18, 2011 7:15 am

Brazilian Rosewood

Joined: Thu Jan 06, 2005 7:29 am
Posts: 3840
Location: England

I use the Stew Mac Mylar, goes on easily with water and a little detergent ala Frank Ford (that should be the Great Frank Ford).

http://www.stewmac.com/shop/Pickguards/Pickguard_materials/Clear_Pickguard_Materials.html?actn=100101&xst=3&xsr=131.301

Colin

_________________
I don't believe in anything, I simply make use of a set of reasonable working hypotheses.

Top

Fred Tellier

Post subject: Re: Clear pickguard material needed?

Posted: Sat Jun 18, 2011 7:32 am

Contributing Member

Joined: Fri Mar 24, 2006 12:42 pm
Posts: 2360
Location: Windsor Ontario Canada
First name: Fred
Last Name: Tellier
City: Windsor
State: Ontario
Zip/Postal Code: N8T2C6
Country: Canada
Focus: Build
Status: Amateur

Another good word for Stewmac product, it works well, can be removed with a little naptha without much grief and applies well with soapy water as mentioned above. I have a new sharp scissors that I only use for cutting it, I used a less sharp set the 1st time and the edge was a little rough.

Fred

_________________
Fred Tellier
http://www.fetellierguitars.com
Facebook page http://www.facebook.com/pages/FE-Tellier-Guitars/163451547003866

Top

Mark Tripp

Post subject: Re: Clear pickguard material needed?

Posted: Sun Jun 19, 2011 8:09 pm

Koa

Joined: Thu Oct 27, 2005 2:07 am
Posts: 815
Location: Olympia
First name: Mark
Last Name: Tripp
City: Olympia
State: Washington
Zip/Postal Code: 98506
Country: United States
Focus: Build
Status: Semi-pro

Another vote for the StewMac product...

_________________
Pullman, WA

The more I know, the more I know I don't know.

trippguitars.com
OR
Find me on Facebook

Top

Page 1 of 1

[ 6 posts ]

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 24 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:

Official Luthiers Forum!

Forum rules

Clear pickguard material needed?

Who is online