***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Jun 26, 2025 11:11 am


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 
  Print view Previous topic | Next topic 
Author Message
Maximus
PostPosted: Fri Dec 24, 2010 10:12 am 
Offline
Walnut
Walnut

Joined: Mon Dec 13, 2010 4:03 pm
Posts: 14
First name: Massimo
Last Name: Incarbone
City: Vittoria (RG)
State: Italia
Zip/Postal Code: 97019
Country: Italy
Focus: Build
Status: Amateur
Hi, here i am with my seconf topic in this forum. Today i wanna show you how i did my side lamination jic and mold for the solera.
First, i begin with the template
Attachment:
IMG_1494.jpg

Attachment:
IMG_1495.jpg


This gives me the template i will use for all. I traced an outside line far 2 1/2 from the inside line
Attachment:
IMG_1501.jpg


Next a little square line for clamping at the waist
Attachment:
IMG_1502.jpg


The fit with the template, i think, is good:

Attachment:
IMG_1506.jpg

Attachment:
IMG_1507.jpg

Attachment:
IMG_1508.jpg


You do not have the required permissions to view the files attached to this post.

Top
 Profile  
 
Maximus
PostPosted: Fri Dec 24, 2010 10:18 am 
Offline
Walnut
Walnut

Joined: Mon Dec 13, 2010 4:03 pm
Posts: 14
First name: Massimo
Last Name: Incarbone
City: Vittoria (RG)
State: Italia
Zip/Postal Code: 97019
Country: Italy
Focus: Build
Status: Amateur
The six pieces for the mold finished
Attachment:
IMG_1512.jpg

and the mold in place on the solera (i will have to trim the ends and i will do this in a couple of days)
Attachment:
IMG_1514.jpg

Attachment:
IMG_1515.jpg

Attachment:
IMG_1516.jpg

Attachment:
IMG_1519.jpg


You do not have the required permissions to view the files attached to this post.

Top
 Profile  
 
Maximus
PostPosted: Fri Dec 24, 2010 10:25 am 
Offline
Walnut
Walnut

Joined: Mon Dec 13, 2010 4:03 pm
Posts: 14
First name: Massimo
Last Name: Incarbone
City: Vittoria (RG)
State: Italia
Zip/Postal Code: 97019
Country: Italy
Focus: Build
Status: Amateur
Now is the time of the side lamination jig
Other six pieces cutted and routed with the same template:
Attachment:
IMG_1523.jpg

and glued together one at a time
Attachment:
IMG_1526.jpg

Attachment:
IMG_1524.jpg


And, at the end, 3 pieces of masonite, bended and glued together with 18 pieces of wood:
Attachment:
IMG_1535.jpg
Attachment:
IMG_1537.jpg
Attachment:
.jpg


You do not have the required permissions to view the files attached to this post.

Top
 Profile  
 
Maximus
PostPosted: Fri Dec 24, 2010 10:31 am 
Offline
Walnut
Walnut

Joined: Mon Dec 13, 2010 4:03 pm
Posts: 14
First name: Massimo
Last Name: Incarbone
City: Vittoria (RG)
State: Italia
Zip/Postal Code: 97019
Country: Italy
Focus: Build
Status: Amateur
Sorry, i've made a mistake with the last picture of the previous topic, i have to learn well how to post photos... and how to make jigs too!
I have handy some pictures of my headstock and i want to show you:
Attachment:
IMG_1540.jpg
Attachment:
IMG_1541.jpg
Attachment:
IMG_1542.jpg


You do not have the required permissions to view the files attached to this post.

Top
 Profile  
 
WudWerkr
PostPosted: Fri Dec 24, 2010 10:35 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
Maximus ! I like that headstock ! Nice design [:Y:]

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/
Top
 Profile  
 
Maximus
PostPosted: Fri Dec 24, 2010 10:35 am 
Offline
Walnut
Walnut

Joined: Mon Dec 13, 2010 4:03 pm
Posts: 14
First name: Massimo
Last Name: Incarbone
City: Vittoria (RG)
State: Italia
Zip/Postal Code: 97019
Country: Italy
Focus: Build
Status: Amateur
Other pictures of the caul beeing glued:
Attachment:
IMG_1555.jpg
Attachment:
IMG_1556.jpg
Attachment:
IMG_1557.jpg


And the caul finished:
Attachment:
IMG_1561.jpg


I will show the side lamination process, i hope, soon!
Merry Christmas to everyone of you!
Massimo.


You do not have the required permissions to view the files attached to this post.

Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: ChuckB and 19 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com