Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sun Aug 17, 2025 2:46 pm


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 16 posts ] 
Author Message
 Post subject: Best Water Based Lacquer
PostPosted: Sat Nov 20, 2010 9:46 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Thu Feb 21, 2008 3:09 pm
Posts: 149
Location: Tulsa, OK
For a first time sprayer, what is the best water based lacquer to use?

EM6000
KTM-9 ( worried about long term)
ColorTone
OTHERS???

_________________
Bro. Matthew A.
Oklahoma


Last edited by 000lover on Sat Nov 20, 2010 9:51 pm, edited 1 time in total.

Top
 Profile  
 
PostPosted: Sat Nov 20, 2010 9:48 pm 
Offline
Cocobolo
Cocobolo

Joined: Fri Apr 14, 2006 3:08 pm
Posts: 229
Location: United States
First name: John
Last Name: Thiessen
City: Lexington Park
State: MD
EM6000

_________________
John Thiessen
http://www.iszacguitars.com


Top
 Profile  
 
PostPosted: Sat Nov 20, 2010 9:54 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Mar 14, 2010 12:00 pm
Posts: 2020
Location: Utah
I believe EM6000 and ColorTone are the same, or virtually so. Someone please correct me if I'm wrong.


Top
 Profile  
 
PostPosted: Sat Nov 20, 2010 9:58 pm 
Offline
Cocobolo
Cocobolo

Joined: Fri Apr 14, 2006 3:08 pm
Posts: 229
Location: United States
First name: John
Last Name: Thiessen
City: Lexington Park
State: MD
Colortone is made by Target Coatings, but it is not the same. Very similar, If I recall right, the colortone is more like the product that EM6000 replaced. As far as ease of spraying and being extremely forgiving, EM6000 is the best. Not to mention it is way harder and slicker than KTM-9 or anything else I have tried that is water based.

_________________
John Thiessen
http://www.iszacguitars.com


Top
 Profile  
 
PostPosted: Sat Nov 20, 2010 10:10 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Thu Feb 21, 2008 3:09 pm
Posts: 149
Location: Tulsa, OK
Is shellac compatable with em6000? I've heard that some have had trouble with shellac and KTM-9 so I wasn't sure if that is true with all water based lacquers. What do you guys use for a sealer?

_________________
Bro. Matthew A.
Oklahoma


Top
 Profile  
 
PostPosted: Sat Nov 20, 2010 10:57 pm 
Offline
Cocobolo
Cocobolo

Joined: Fri Apr 14, 2006 3:08 pm
Posts: 229
Location: United States
First name: John
Last Name: Thiessen
City: Lexington Park
State: MD
I have used both the Target water based shellac and zinsers bullseye, only issue I ever noted was that it seems to take longer to fully chemically cured when used over shellac. By that I mean, you can always sand and polish after 2 weeks of drying, but never wet sand with water cause at 2 weeks the em6000 isn't quite completely water resistant. It takes a month or two for it to be full on water/chemically resistant even though it no longer shrinks, but over the shellac it seemed to take a little longer, not much though. I personally like it over shellac cause it adds depth.

_________________
John Thiessen
http://www.iszacguitars.com


Top
 Profile  
 
PostPosted: Sun Nov 21, 2010 4:40 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Feb 20, 2008 7:15 pm
Posts: 7555
First name: Ed
Last Name: Bond
City: Nanaimo
Country: Canada
Focus: Build
Status: Professional
There have been enough issues with ktm-9 bubbling under hand sweat to justify a reommendation to avoid it. Em-6000 reputably has the slight bluish cast typical of acrylics. Try KTM-SV. But read the currently running SV thread on this forum for more educated thoughts than mine. But stay off KTM 9.


Top
 Profile  
 
PostPosted: Sun Nov 21, 2010 6:01 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7475
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
Another one for EM6000. I use it over shellac and I let it cure for a week then wet sand using mineral spirits.

I did a neck repair on one guitar and didn't use any shellac on the repaired area, just went straight to the EM6000. Don't know if it was the product or something I did but the adhesion wasn't the best in that spot.

_________________
Steve Smith
"Music is what feelings sound like"


Top
 Profile  
 
PostPosted: Sun Nov 21, 2010 9:40 am 
Offline
Koa
Koa
User avatar

Joined: Tue Nov 28, 2006 1:44 pm
Posts: 1105
Location: Crownsville, MD
First name: Trevor
Last Name: Lewis
City: Crownsville
State: MD
Zip/Postal Code: 21032
Country: USA
Focus: Build
Status: Semi-pro
Another vote for EM6000...!

Image

Image

Here are some things I do that may help:
~20 coats seems to be about equivalent to about .005" thick finish once buffed.
~I dry sand with 400 and then wet sand up to 2000 grit before buffing
~sealing with shellac helps pop the grain

Good luck

Trev

_________________
http://www.PeakeGuitars.com


Top
 Profile  
 
PostPosted: Sun Nov 21, 2010 3:55 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Tue Dec 08, 2009 1:36 pm
Posts: 199
First name: Wes
Last Name: Young
City: NEWFIELD
State: NY
Zip/Postal Code: 14867
Country: United States
Focus: Build
Status: Professional
I am no expert in finishing. But hear is my experience.

I ordered a gallon of EM6000 in matt and a pint in gloss.
I wanted the bodies on a set of three guitars to be matt and just the headstocks to be gloss.

The gloss looks great I laid it on thick for the headstock, its clear and beautiful.

I tried to lay the matt down as thin as I could. It had a major blue haze to it. I tried laying it thinner, then thought after it cured it might clear up.
No dice, it looks terrible. I am sanding it off all three guitars, its a real pain.
Also it check really bad on my tops. I am going to redo them in the gloss.

I was thinking of switching to nitro or something oil based on my next?


Top
 Profile  
 
PostPosted: Sun Nov 21, 2010 10:02 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Thu Feb 21, 2008 3:09 pm
Posts: 149
Location: Tulsa, OK
So would any recommend

http://www.targetcoatings.com/shop/prod ... 70-10.html

over

http://www.rustoleum.com/CBGProduct.asp?pid=246 (wax free) ??

The target shellac is amber and I'm not sure if the Bulls Eye is or not. Does amber darken the top a lot?

_________________
Bro. Matthew A.
Oklahoma


Top
 Profile  
 
PostPosted: Mon Nov 22, 2010 8:19 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Jun 12, 2008 6:59 am
Posts: 1964
Location: Rochester Michigan
I haven't used EM6000 yet but I used the older USL over shellac with no problems (I have a can of EM6000 in my basement, it's just that my output is so low it takes quite a while for me to make it through a gallon of finish!).

I would not recommend using any pre-mixed shellac under any circumstances. Mixing your own shellac is so easy and cheaper to boot that it makes no sense to buy pre-mixed shellac, especially one that's been modded to somehow be water borne. I've also seen a thread, perhaps on this board where EM6000 over target WB Shellac didn't have the same water resistance once cured. The guy from Target responded and I believe even duplicated the failure but I can't remember what the solution was.

Buy a bag of super blond dewaxed from LMI or Stew Mac and a can of alcohol from your hardware store. Mix up a 1lb cut 8 oz at a time (1 oz flakes by weight in 8 oz of alcohol by volume) and I think you'll see you've got more than enough for a full guitar build.

Another advantage of using shellac in alcohol is that it won't raise the grain like a water born does - makes for a much easier sealing session.

Check out these threads:

http://www.targetcoatings.com/forum/vie ... php?t=1374

viewtopic.php?f=10101&t=22229&p=305993&hilit=EM6000+water+resistance#p305993

Target EM6000 - Good!

Premixed Shellac - BAD!*

*Even if it's o.k. most of the time, why take the risk?

_________________
http://www.birkonium.com CNC Products for Luthiers
http://banduramaker.blogspot.com


Top
 Profile  
 
PostPosted: Mon Nov 22, 2010 7:10 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue May 13, 2008 10:44 am
Posts: 6262
Location: Virginia
I ave never used the em6000 but I will give it a try in the future. I have used KTM and Colortone and I like the colortone a lot. I used to always sand through the KTM and I've never done that with the Colortone using the same method. I lay it on very thin and use lots and lots of coats before leveling and finishing with 2 or 3 top coats.


Top
 Profile  
 
PostPosted: Tue Nov 23, 2010 7:22 pm 
Offline
Cocobolo
Cocobolo

Joined: Tue Aug 15, 2006 8:03 am
Posts: 456
Location: Toronto, Canada
I have used EM6000 over traditional flake shellac and over the Target Waterborne shellac and have had no problems with either.

_________________
David White, Toronto

"All my favourite singers can't sing."


Top
 Profile  
 
PostPosted: Thu Nov 25, 2010 2:40 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Thu Feb 21, 2008 3:09 pm
Posts: 149
Location: Tulsa, OK
based on the specs from this sprayer ( http://www.rockler.com/product.cfm?page ... ilter=hvlp ) do you think it will do the EM6000 ok?

_________________
Bro. Matthew A.
Oklahoma


Top
 Profile  
 
PostPosted: Mon Nov 29, 2010 10:04 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Mon May 26, 2008 2:31 pm
Posts: 259
Location: Conway, Arkansas
I have used two coats of 2lb flake shellac (from LMI) under the Stew-Mac waterbased finish system and had major crazing and adhesion problems.

_________________
Formerly know as Mandodiddle.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 16 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 43 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com