Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Oct 31, 2024 6:51 pm


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 1648 posts ]  Go to page Previous  1 ... 5, 6, 7, 8, 9, 10, 11 ... 66  Next
Author Message
PostPosted: Fri Jan 28, 2022 9:26 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Aug 19, 2005 4:02 am
Posts: 3260
Location: The Woodlands, Texas
First name: Barry
Last Name: Daniels
joshnothing wrote:
Barry, did you need to clean up that Martin and if so, how did you approach dealing with the mold? Just had a very moldy guitar arrive at my shop this week and will need to clean it up before I start any repairs. In the past I’ve tried pouring rice in the soundhole, shaking the guitar and vaccuming it all out which kind of worked but I’m wondering if there’s a better way…


My guitar was already coming apart at the seams so I had to take the back off for access, and that allowed me to scrape and sand the inside to get it as clean as possible.

I am not sure that rice would be aggressive enough to clean up your guitar. I would suggest something more abrasive like coarse sand, or even crushed rock. We use a lot of weathered granite around here for landscaping and it seems to have very sharp granules. Just make sure that whatever you use is good and dry.



These users thanked the author Barry Daniels for the post: joshnothing (Fri Jan 28, 2022 3:56 pm)
Top
 Profile  
 
PostPosted: Fri Jan 28, 2022 9:37 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue May 13, 2008 10:44 am
Posts: 6256
Location: Virginia
DennisK wrote:
jfmckenna wrote:
I brush on the first 3-4 coats of shellac after filling too just to build it up before the elbow work.

Interesting. How thick are you making it? By the time the pores are filled, I'm pretty much done. Just a thin film to gloss it up. And if I can't get the muneca to work (which is most of the time), I just sand it with the first 3 grits of micromesh and wipe on a coat of dilute shellac. If done properly, the surface tension forms a nearly perfect surface except for some slightly visible streaks in the direction of wiping.


I have never really measured its thickness but it's pretty thin. I sand that back then French Polish. I like to build up the shellac probably thicker than most to at least try and get the most protection from this already delicate finish. I definitely do more on the backs and sides too.



These users thanked the author jfmckenna for the post: DennisK (Sat Jan 29, 2022 10:31 pm)
Top
 Profile  
 
PostPosted: Fri Jan 28, 2022 3:58 pm 
Offline
Koa
Koa

Joined: Tue Jan 15, 2013 10:00 pm
Posts: 985
First name: Josh
Focus: Build
Status: Amateur
Barry Daniels wrote:
joshnothing wrote:
Barry, did you need to clean up that Martin and if so, how did you approach dealing with the mold? Just had a very moldy guitar arrive at my shop this week and will need to clean it up before I start any repairs. In the past I’ve tried pouring rice in the soundhole, shaking the guitar and vaccuming it all out which kind of worked but I’m wondering if there’s a better way…


My guitar was already coming apart at the seams so I had to take the back off for access, and that allowed me to scrape and sand the inside to get it as clean as possible.

I am not sure that rice would be aggressive enough to clean up your guitar. I would suggest something more abrasive like coarse sand, or even crushed rock. We use a lot of weathered granite around here for landscaping and it seems to have very sharp granules. Just make sure that whatever you use is good and dry.

Thanks Barry, appreciate it.


Sent from my iPhone using Tapatalk


Top
 Profile  
 
PostPosted: Sat Jan 29, 2022 7:54 pm 
Offline
Koa
Koa
User avatar

Joined: Fri Jun 22, 2007 11:14 am
Posts: 1028
Location: Newland, North Carolina
First name: Dave
Last Name: Ball
It's gotten pretty cold here in the mountains. Got another 5 or 6 inches of snow--nothing like what they're getting up north! But in my shop today, it's heater active and messing with my CNC laser for making labels...


You do not have the required permissions to view the files attached to this post.



These users thanked the author ballbanjos for the post: Robbie_McD (Tue Feb 01, 2022 10:39 pm)
Top
 Profile  
 
PostPosted: Sat Jan 29, 2022 8:39 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue May 13, 2008 10:44 am
Posts: 6256
Location: Virginia
David you got more then us up here in the Appalachian mountains of Virginia. We got maybe 2 inches but that was piled on last weeks 8 or so inches which had melted down some. Being a Native New Englander I kind of wish I was up there. I remember the blizzard of '78 I think it was. I was only a child but we built a network of igloos around the house :)

Now I enjoy a good snow storm because I can shovel a path from the house to my shop and have an excuse to spend a full day inside.


Top
 Profile  
 
PostPosted: Sun Jan 30, 2022 4:03 am 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 13370
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
My shipment goes out tomorrow of amp badges and a clock for my studio.

The large "Heshtone" is going on the Marshall clone I built and two more smaller badges like the one of the clock will go on the two 50's tweed amps I built. Excited to get this stuff and install it.

This stuff and much more creative and cool stuff for your amps, studios, homes on a guitar theme is available from a company called Droplight.


You do not have the required permissions to view the files attached to this post.



These users thanked the author Hesh for the post: Robbie_McD (Tue Feb 01, 2022 10:39 pm)
Top
 Profile  
 
PostPosted: Sun Jan 30, 2022 6:22 am 
Offline
Koa
Koa
User avatar

Joined: Fri Jun 22, 2007 11:14 am
Posts: 1028
Location: Newland, North Carolina
First name: Dave
Last Name: Ball
jfmckenna wrote:
David you got more then us up here in the Appalachian mountains of Virginia. We got maybe 2 inches but that was piled on last weeks 8 or so inches which had melted down some. Being a Native New Englander I kind of wish I was up there. I remember the blizzard of '78 I think it was. I was only a child but we built a network of igloos around the house :)

Now I enjoy a good snow storm because I can shovel a path from the house to my shop and have an excuse to spend a full day inside.


I was in Vermont at Charles Fox's school when that 78 blizzard hit. The snow was over the top of the yurts, and we tunneled from the yurts to the shop. Pretty big time actually!

We got about 4 or 5 extra inches on top of the 15 or so we got last week. There was still about a foot on the ground before this latest round, but the streets were clear. Mainly, it's been cold. I've been getting in a lot of quality shop time in between shoveling snow.

Dave



These users thanked the author ballbanjos for the post: jfmckenna (Tue Feb 01, 2022 7:16 pm)
Top
 Profile  
 
PostPosted: Tue Feb 01, 2022 1:03 pm 
Offline
Koa
Koa

Joined: Tue Jul 22, 2008 9:34 pm
Posts: 514
Location: ottawa, ontario, ca
First name: Mike
Last Name: McNerney
City: Ottawa
State: On
Country: Ca
Focus: Build
Status: Amateur
I am having some difficulty making an esthetic decision. check the 3 options I am considering and give me your opinions. The satinwood turns fairly 'goldish' The binding is a deep blue celluloid.


You do not have the required permissions to view the files attached to this post.

_________________
Mike McNerney


Top
 Profile  
 
PostPosted: Tue Feb 01, 2022 1:09 pm 
Offline
Koa
Koa

Joined: Tue Jul 22, 2008 9:34 pm
Posts: 514
Location: ottawa, ontario, ca
First name: Mike
Last Name: McNerney
City: Ottawa
State: On
Country: Ca
Focus: Build
Status: Amateur
for some reason I can't add sw op3 which is satinwood headplate and blue celluloid logo and dots which you can just see on the AB FB?

_________________
Mike McNerney



These users thanked the author mikemcnerney for the post: Hesh (Tue Feb 01, 2022 1:12 pm)
Top
 Profile  
 
PostPosted: Tue Feb 01, 2022 1:13 pm 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 13370
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
mikemcnerney wrote:
for some reason I can't add sw op3 which is satinwood headplate and blue celluloid logo and dots which you can just see on the AB FB?


Mike the pic has to be under 200K which is hard to do these days and that may be why it won't let you add it.


Top
 Profile  
 
PostPosted: Tue Feb 01, 2022 1:34 pm 
Offline
Koa
Koa

Joined: Tue Jul 22, 2008 9:34 pm
Posts: 514
Location: ottawa, ontario, ca
First name: Mike
Last Name: McNerney
City: Ottawa
State: On
Country: Ca
Focus: Build
Status: Amateur
10th attempthttps://www.luthiersforum.com/fo ... 1&t=54593#


You do not have the required permissions to view the files attached to this post.

_________________
Mike McNerney



These users thanked the author mikemcnerney for the post: Hesh (Wed Feb 02, 2022 5:12 am)
Top
 Profile  
 
PostPosted: Tue Feb 01, 2022 5:44 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Apr 16, 2012 12:47 pm
Posts: 2513
First name: Jay
Last Name: De Rocher
City: Bothell
State: Washington
I put the strings on for the first time on this new design octave mandolin. The setup is done and guess what I've been doing since then this afternoon.

Attachment:
Strings on first time and set up for playing.jpg


You do not have the required permissions to view the files attached to this post.

_________________
Once in a while you get shown the light in the strangest of places if you look at it right - Robert Hunter



These users thanked the author J De Rocher for the post (total 4): Durero (Sun Feb 13, 2022 12:15 am) • Michaeldc (Wed Feb 02, 2022 7:52 am) • Hesh (Wed Feb 02, 2022 5:16 am) • Chris Pile (Wed Feb 02, 2022 12:57 am)
Top
 Profile  
 
PostPosted: Tue Feb 01, 2022 5:57 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Mon Jan 28, 2008 5:21 am
Posts: 4903
Location: Central PA
First name: john
Last Name: hall
City: Hegins
State: pa
Zip/Postal Code: 17938
Country: usa
Focus: Build
Status: Professional
neck reset on 8 month Martin reglued back cross grain that was falling out

_________________
John Hall
blues creek guitars
Authorized CF Martin Repair
Co President of ASIA
You Don't know what you don't know until you know it


Top
 Profile  
 
PostPosted: Tue Feb 01, 2022 9:06 pm 
Offline
Koa
Koa

Joined: Tue Jan 15, 2013 10:00 pm
Posts: 985
First name: Josh
Focus: Build
Status: Amateur
Just finished regluing three loose back braces, a refret, new nut, saddle and a new pickguard for a fella. He told me that after over 1000 gigs, his jumbo had earned him enough money that it was time to put a little of it back into looking after her.

Image


The back braces had been previously repaired by someone who left a whole heap of glue everywhere except under the braces. Cleaning it all up so I could get started took longer than fixing the braces themselves.

I always expect a tonal improvement when I pitch a plastic saddle and replace it with bone but this is by far the most dramatic tonal improvement I’ve encountered. I was so surprised that I went and fished the old saddle out of the trash and swapped it back in just to check my ears weren’t deceiving me. A totally different instrument, both acoustically and amplified. With the plastic saddle it was one of the puniest jumbos I’d ever heard. With bone it’s as good as any I’ve encountered.



These users thanked the author joshnothing for the post (total 4): PatrickW (Mon Dec 19, 2022 11:52 pm) • Hesh (Wed Feb 02, 2022 5:15 am) • Chris Pile (Wed Feb 02, 2022 12:57 am) • Robbie_McD (Tue Feb 01, 2022 10:42 pm)
Top
 Profile  
 
PostPosted: Wed Feb 02, 2022 4:15 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5484
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
Yesterday I learnt not to work when upset.
Adjusted radius of cut but forgot to re-tighten the locking knobs on my W-C jig before cutting. oops_sign
Oh well, wasn't so sure about this Sitka top anyway, bit on the heavy side at 0.46 S.G., although it was extremely stiff.


You do not have the required permissions to view the files attached to this post.

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.



These users thanked the author Colin North for the post (total 2): Chris Pile (Sun Feb 06, 2022 12:24 am) • Hesh (Wed Feb 02, 2022 5:14 am)
Top
 Profile  
 
PostPosted: Wed Feb 02, 2022 5:14 am 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 13370
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
mikemcnerney wrote:


I like this one best it's subtile and frames the entire guitar in a similar look. The blue is cool too but I would want to see it elsewhere too to do that ole repetition of shape and design thing that we humans seem to be comforted by.

You could still do some contrast with the tuner knobs perhaps black or a tone wood that matches or contrasts.



These users thanked the author Hesh for the post: mikemcnerney (Wed Feb 02, 2022 10:14 am)
Top
 Profile  
 
PostPosted: Wed Feb 02, 2022 7:32 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7371
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
Colin, I’ve saved a top with a similar issue (bit came loose) by inlaying a new center section. The rosette covers the join. Sounds like you may be leaning towards a new top though.

_________________
Steve Smith
"Music is what feelings sound like"


Top
 Profile  
 
PostPosted: Wed Feb 02, 2022 7:44 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sat Jul 31, 2010 4:03 pm
Posts: 158
First name: Neil
Last Name: Kwak
State: PA
Country: United States
Focus: Build
Status: Amateur
Colin North wrote:
Yesterday I learnt not to work when upset.
Adjusted radius of cut but forgot to re-tighten the locking knobs on my W-C jig before cutting. oops_sign
Oh well, wasn't so sure about this Sitka top anyway, bit on the heavy side at 0.46 S.G., although it was extremely stiff.


I'm glad to see I'm not the only one.

Image

This is a Carpathian spruce that somebody with my inexperience has no business working with. That's why I love finding those $20 "student grade" tops and orphaned backs and sides to take all my inexperience and angst and stupidity out upon.

As for me, in another thread I outed myself as a perpetual novice - which is my way of saying that years of procrastination and life getting in the way (i.e. my kids fraying my nerves to the breaking point.) I should have a LOT more builds under my belt but I don't. Number 2 has literally taken a decade and Number 1 was completed so long ago that I noticed that the French polish needs touching up. I'm currently in the process of trying to find the right grit to sand out some pretty nasty scratches. I'm thinking I'm going to have to make some small project (like a jewelry box or a wine rack for my wife) to practice on instead.

Image

I really can't do much more on Number 2 though. After putting the frets on in October I put it to bed for winter because I'm too much of a bear. I'm looking forward to the day in spring when I can roll my portable workbench out into the driveway so that I work under warm sunlight and not worry about burning my house down.

Image

This is typically the time of year when the whole house humidifier that I put on my furnace struggles to keep the house above 30% RH so everything guitar-shaped lives in a case with dampits and sponges and I shift focus to jig making. This year's project is my first attempt at a Fox bending machine - which again is something that I should have done long long ago since I somewhere sometime years ago somebody donated a copy of the old LMI plans (the ones that use light bulbs as the heating source.)

Image



These users thanked the author nkwak for the post: Hesh (Wed Feb 02, 2022 10:12 am)
Top
 Profile  
 
PostPosted: Wed Feb 02, 2022 9:52 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5484
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
SteveSmith wrote:
Colin, I’ve saved a top with a similar issue (bit came loose) by inlaying a new center section. The rosette covers the join. Sounds like you may be leaning towards a new top though.

Yes Steve, started work on a Torrified Sitka top already (it's for me), but I'm not throwing this on the bonfire yet, thanks for the excellent suggestion.
Tap tone's too nice and I think it will make a nice Celtiic strummer/Bluegrass top. Rings more like nice Adi than Sitka.

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.



These users thanked the author Colin North for the post: SteveSmith (Wed Feb 02, 2022 11:04 am)
Top
 Profile  
 
PostPosted: Wed Feb 02, 2022 10:23 am 
Offline
Cocobolo
Cocobolo

Joined: Sat Dec 28, 2013 10:06 am
Posts: 256
First name: Mike
Last Name: Spector
City: ORANGE
State: TX
Zip/Postal Code: 77632
Country: USA
Focus: Build
Status: Amateur
I thought it would be fun to have a lap steel to play while laying back in the Lazy Boy, so I started a Weissenborn. I'm using ALS (Australian Luth...) plans and it just seems like there ought to be some kind of bracing near the "hollow" neck, but I suppose they know what it's supposed to be so that's how it's getting built
Image


Top
 Profile  
 
PostPosted: Wed Feb 02, 2022 11:08 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7371
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
Colin North wrote:
SteveSmith wrote:
Colin, I’ve saved a top with a similar issue (bit came loose) by inlaying a new center section. The rosette covers the join. Sounds like you may be leaning towards a new top though.

Yes Steve, started work on a Torrified Sitka top already (it's for me), but I'm not throwing this on the bonfire yet, thanks for the excellent suggestion.
Tap tone's too nice and I think it will make a nice Celtiic strummer/Bluegrass top. Rings more like nice Adi than Sitka.


Just FYI, here's the one where the bit slipped and I put in a new middle section. I didn’t have another piece of torrefied spruce with a good grain match but even with the mismatched grain it looks fine. In fact I had to go looking to remember which guitar it was on - ha.

Attachment:
RosetteFix-small.jpg


You do not have the required permissions to view the files attached to this post.

_________________
Steve Smith
"Music is what feelings sound like"


Last edited by SteveSmith on Wed Feb 02, 2022 11:24 am, edited 2 times in total.


These users thanked the author SteveSmith for the post: Colin North (Wed Feb 02, 2022 1:10 pm)
Top
 Profile  
 
PostPosted: Wed Feb 02, 2022 11:16 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Feb 12, 2009 12:12 pm
Posts: 3293
First name: Bryan
Last Name: Bear
City: St. Louis
State: Mo
Country: USA
Focus: Build
Status: Amateur
Colin North wrote:
Yesterday I learnt not to work when upset.
Adjusted radius of cut but forgot to re-tighten the locking knobs on my W-C jig before cutting. oops_sign
Oh well, wasn't so sure about this Sitka top anyway, bit on the heavy side at 0.46 S.G., although it was extremely stiff.


I you have one of those tops with the secondary internal rosette. Those are fancy even if they do get covered up by a soundhole reinforcement ring sometimes.

_________________
Bryan Bear PMoMC

Take care of your feet, and your feet will take care of you.


Top
 Profile  
 
PostPosted: Sat Feb 05, 2022 9:26 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Aug 19, 2005 4:02 am
Posts: 3260
Location: The Woodlands, Texas
First name: Barry
Last Name: Daniels
I have a large repair project on my bench. A few friends are helping me.

I'll post a photo in a later message.


Last edited by Barry Daniels on Sat Feb 05, 2022 9:30 pm, edited 1 time in total.


These users thanked the author Barry Daniels for the post: Hesh (Sun Feb 06, 2022 4:10 am)
Top
 Profile  
 
PostPosted: Sat Feb 05, 2022 9:28 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Aug 19, 2005 4:02 am
Posts: 3260
Location: The Woodlands, Texas
First name: Barry
Last Name: Daniels
Attachment:
Image 2-5-22 at 6.06 PMResized.jpg





Actually, a friend of mine that frequents facebook sent me this photo.


You do not have the required permissions to view the files attached to this post.



These users thanked the author Barry Daniels for the post (total 4): Robbie_McD (Mon Feb 07, 2022 7:48 am) • joshnothing (Sun Feb 06, 2022 5:59 am) • Hesh (Sun Feb 06, 2022 4:10 am) • bcombs510 (Sat Feb 05, 2022 10:36 pm)
Top
 Profile  
 
PostPosted: Sat Feb 05, 2022 9:36 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Apr 16, 2012 12:47 pm
Posts: 2513
First name: Jay
Last Name: De Rocher
City: Bothell
State: Washington
Looks like you aren't suffering from a staffing shortage where you are. I'm down to just three these days.

Attachment:
Men At Work.jpg


You do not have the required permissions to view the files attached to this post.

_________________
Once in a while you get shown the light in the strangest of places if you look at it right - Robert Hunter



These users thanked the author J De Rocher for the post (total 4): joshnothing (Sun Feb 06, 2022 6:00 am) • Hesh (Sun Feb 06, 2022 4:11 am) • bcombs510 (Sat Feb 05, 2022 10:36 pm) • Michaeldc (Sat Feb 05, 2022 9:50 pm)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1648 posts ]  Go to page Previous  1 ... 5, 6, 7, 8, 9, 10, 11 ... 66  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 38 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com