***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sun Jun 22, 2025 6:18 pm


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 1 of 1
  [ 18 posts ] 
  Print view Previous topic | Next topic 
Author Message
Michaeldc
 Post subject: Simple SS Fret tang jig
PostPosted: Thu Jun 23, 2016 1:00 pm 
Online
Koa
Koa
User avatar

Joined: Sun Jun 22, 2014 1:45 pm
Posts: 1546
First name: Michael
Last Name: Colbert
City: Anacortes
State: WA
Focus: Build
Hi all,

Here is a jig I came up with for cutting SS Fret tangs on bound boards. It uses a SM Dremel adjustable base and a 1-1/4" Dremel cutoff wheel so you get easy fine adjustment and a quick cut. The only downside is the fret gets a bit warm during the cut so I keep a little cup of water on hand to cool it down afterward. It never gets so hot that it discolors the metal but certainly too warm to touch. Works like a champ!

Cheers, M


You do not have the required permissions to view the files attached to this post.

These users thanked the author Michaeldc for the post: DannyV (Fri Jun 24, 2016 11:11 am)
Top
 Profile  
 
Chris Pile
PostPosted: Thu Jun 23, 2016 1:10 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5888
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
Clever. I like it. Could be adapted to work other than fret trimming, too.

_________________
"Act your age, not your shoe size" - Prince
Top
 Profile  
 
david farmer
PostPosted: Thu Jun 23, 2016 1:38 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Nov 11, 2008 9:13 pm
Posts: 835
Location: Durango CO
First name: Dave
Last Name: Farmer
City: Durango
State: CO
Switching to a small jewelers saw blade would cool things down. Just a thought.
Top
 Profile  
 
Jim Watts
PostPosted: Thu Jun 23, 2016 3:14 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu May 12, 2005 5:46 am
Posts: 2994
Location: United States
That's a good idea!

_________________
Jim Watts
http://jameswattsguitars.com
Top
 Profile  
 
Colin North
PostPosted: Thu Jun 23, 2016 3:14 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5571
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
Neat! I likes that.

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.


These users thanked the author Colin North for the post: Doug Balzer (Sat Jun 25, 2016 6:43 pm)
Top
 Profile  
 
JSDenvir
PostPosted: Thu Jun 23, 2016 3:24 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Jul 19, 2008 11:07 am
Posts: 802
Location: Cobourg ON
First name: Steve
Last Name: Denvir
City: Baltimore
State: ON
Zip/Postal Code: K0K 1C0
Country: Canada
Focus: Build
Status: Amateur
How come all my jigs look like they were assembled by drunken elves?


These users thanked the author JSDenvir for the post: Imbler (Thu Jun 23, 2016 6:14 pm)
Top
 Profile  
 
Jim Watts
PostPosted: Thu Jun 23, 2016 3:41 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu May 12, 2005 5:46 am
Posts: 2994
Location: United States
JSDenvir wrote:
How come all my jigs look like they were assembled by drunken elves?

Have you been drinking?

_________________
Jim Watts
http://jameswattsguitars.com
Top
 Profile  
 
Michaeldc
PostPosted: Thu Jun 23, 2016 3:51 pm 
Online
Koa
Koa
User avatar

Joined: Sun Jun 22, 2014 1:45 pm
Posts: 1546
First name: Michael
Last Name: Colbert
City: Anacortes
State: WA
Focus: Build
JSDenvir wrote:
How come all my jigs look like they were assembled by drunken elves?


Because I cheat and use my CNC to make my jigs...
Top
 Profile  
 
david farmer
PostPosted: Thu Jun 23, 2016 5:03 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Nov 11, 2008 9:13 pm
Posts: 835
Location: Durango CO
First name: Dave
Last Name: Farmer
City: Durango
State: CO
Only a matter of time before every drunken elf has CNC.
Top
 Profile  
 
meddlingfool
PostPosted: Thu Jun 23, 2016 5:14 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Feb 20, 2008 7:15 pm
Posts: 7527
First name: Ed
Last Name: Bond
City: Nanaimo
Country: Canada
Focus: Build
Status: Professional
Very nice!
Top
 Profile  
 
BradHall
PostPosted: Thu Jun 23, 2016 5:32 pm 
Offline
Cocobolo
Cocobolo

Joined: Fri Sep 11, 2015 5:23 pm
Posts: 260
First name: Brad
Last Name: Hall
City: Windsor
State: Ca.
Zip/Postal Code: 95492
Country: USA
Focus: Build
Status: Amateur
Great set up. That's exactly what I will need on my current build. Since I don't have a CNC set up, I can use the rosette cutter jig on my Stewmac plunge base to cut the wheel base most of the way. What do you think about a small fence on one side to control fret as you you push it into the wheel? Thanks.

_________________
Brad Hall
Mystic Dawg Guitars
Top
 Profile  
 
printer2
PostPosted: Thu Jun 23, 2016 5:36 pm 
Offline
Cocobolo
Cocobolo

Joined: Tue Mar 26, 2013 6:49 pm
Posts: 403
First name: Fred
City: Winnipeg
Country: Canada
Focus: Build
Status: Amateur
david farmer wrote:
Only a matter of time before every drunken elf has CNC.


If only you can get them to load the parts right side up.


These users thanked the author printer2 for the post: david farmer (Thu Jun 23, 2016 5:42 pm)
Top
 Profile  
 
Michaeldc
PostPosted: Thu Jun 23, 2016 5:45 pm 
Online
Koa
Koa
User avatar

Joined: Sun Jun 22, 2014 1:45 pm
Posts: 1546
First name: Michael
Last Name: Colbert
City: Anacortes
State: WA
Focus: Build
BradHall wrote:
Great set up. That's exactly what I will need on my current build. Since I don't have a CNC set up, I can use the rosette cutter jig on my Stewmac plunge base to cut the wheel base most of the way. What do you think about a small fence on one side to control fret as you you push it into the wheel? Thanks.


Brad,

If I'm understanding you, I think the 1/32" wide slot guide is a better way to go than a fence because the fret body is held co-planer with the cutoff wheel. Does that make sense?

Best, M
Top
 Profile  
 
BradHall
PostPosted: Thu Jun 23, 2016 5:48 pm 
Offline
Cocobolo
Cocobolo

Joined: Fri Sep 11, 2015 5:23 pm
Posts: 260
First name: Brad
Last Name: Hall
City: Windsor
State: Ca.
Zip/Postal Code: 95492
Country: USA
Focus: Build
Status: Amateur
Is there a slot on your set up? I can't see it in the photo. You're right, a slot would be much better. Thanks.


Sent from my iPad using Tapatalk

_________________
Brad Hall
Mystic Dawg Guitars
Top
 Profile  
 
Michaeldc
PostPosted: Thu Jun 23, 2016 6:05 pm 
Online
Koa
Koa
User avatar

Joined: Sun Jun 22, 2014 1:45 pm
Posts: 1546
First name: Michael
Last Name: Colbert
City: Anacortes
State: WA
Focus: Build
BradHall wrote:
Is there a slot on your set up? I can't see it in the photo. You're right, a slot would be much better. Thanks.

Yup, look closely at the first photo.




Sent from my iPad using Tapatalk
Top
 Profile  
 
BradHall
PostPosted: Thu Jun 23, 2016 6:07 pm 
Offline
Cocobolo
Cocobolo

Joined: Fri Sep 11, 2015 5:23 pm
Posts: 260
First name: Brad
Last Name: Hall
City: Windsor
State: Ca.
Zip/Postal Code: 95492
Country: USA
Focus: Build
Status: Amateur
Duh..don't know how I missed the first photo. Thanks again.


Sent from my iPad using Tapatalk

_________________
Brad Hall
Mystic Dawg Guitars
Top
 Profile  
 
Imbler
PostPosted: Thu Jun 23, 2016 6:15 pm 
Offline
Cocobolo
Cocobolo

Joined: Sun Jun 21, 2009 6:14 pm
Posts: 439
First name: Mike
Last Name: Imbler
City: Wichita
State: KS
Zip/Postal Code: 67204
Country: usa
Focus: Build
Jim Watts wrote:
JSDenvir wrote:
How come all my jigs look like they were assembled by drunken elves?

Have you been drinking?


Or on a slightly more relevant note: Have your elves been drinking? :)
Top
 Profile  
 
JSDenvir
PostPosted: Fri Jun 24, 2016 10:21 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Jul 19, 2008 11:07 am
Posts: 802
Location: Cobourg ON
First name: Steve
Last Name: Denvir
City: Baltimore
State: ON
Zip/Postal Code: K0K 1C0
Country: Canada
Focus: Build
Status: Amateur
Well geez, now that you mention it... :-)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 18 posts ] 

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: doncaparker, Michaeldc and 53 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com