***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Tue Jul 22, 2025 2:58 am


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 
  Print view Previous topic | Next topic 
Author Message
Cablepuller
PostPosted: Fri Feb 13, 2015 12:38 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Dec 14, 2014 1:26 pm
Posts: 214
Hi

Need to drill the pegholes but the money center (the wife) says we cant afford a pillar drill

is a cordless drill ok ?
If so any tips on keeping it level

Cheers
Top
 Profile  
 
ernie
PostPosted: Fri Feb 13, 2015 12:55 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Jan 06, 2011 6:08 pm
Posts: 2712
First name: ernest
Last Name: kleinman
City: lee's summit
State: mo
Zip/Postal Code: 64081
Country: usa
Focus: Build
Status: Professional
use a square to align up 90 deg hole use undersized bit and have a backup piece of scrap wood clamped on headstock.(reduces splintering) Use reamer and carefully measure until you achieve perfect fit


These users thanked the author ernie for the post: Cablepuller (Fri Feb 13, 2015 1:28 pm)
Top
 Profile  
 
kencierp
PostPosted: Fri Feb 13, 2015 1:01 pm 
Offline
Koa
Koa

Joined: Sat May 19, 2007 11:03 am
Posts: 1737
Location: Litchfield MI
Focus: Build
Status: Professional
Sure you can use a hand drill and a brad point drill -- but you also need to make the little fixture shown in this DIY video a square is not enough of a guide.

http://www.todayshomeowner.com/video/di ... lar-holes/

_________________
Ken Cierp

http://www.kennethmichaelguitars.com/


These users thanked the author kencierp for the post: Cablepuller (Fri Feb 13, 2015 7:11 pm)
Top
 Profile  
 
Cablepuller
PostPosted: Fri Feb 13, 2015 1:29 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Dec 14, 2014 1:26 pm
Posts: 214
Cheers ken .. good tip
Top
 Profile  
 
Cablepuller
PostPosted: Fri Feb 13, 2015 1:42 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Dec 14, 2014 1:26 pm
Posts: 214
ernie wrote:
use a square to align up 90 deg hole use undersized bit and have a backup piece of scrap wood clamped on headstock.(reduces splintering) Use reamer and carefully measure until you achieve perfect fit

Ernie Do you put the scrap on the top and drill from behind or does it not matter cheers
Top
 Profile  
 
ernie
PostPosted: Sat Feb 14, 2015 5:51 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Jan 06, 2011 6:08 pm
Posts: 2712
First name: ernest
Last Name: kleinman
City: lee's summit
State: mo
Zip/Postal Code: 64081
Country: usa
Focus: Build
Status: Professional
I would drill from the top with an undersized bit, and have the scrap block firmly clamped to the back . In case of small splintering, hopefully the tuner will cover the splinter or reaming out the hole from the backside will hide most of it.


These users thanked the author ernie for the post: Cablepuller (Sun Feb 15, 2015 2:57 am)
Top
 Profile  
 
bobgramann
PostPosted: Sat Feb 14, 2015 8:58 pm 
Offline
Koa
Koa

Joined: Mon Oct 17, 2011 4:10 pm
Posts: 781
First name: Bob
Last Name: Gramann
City: Fredericksburg
State: VA
Zip/Postal Code: 22408
Country: USA
Focus: Build
Status: Professional
I drill all the way through with a small diameter bit. Then I use that hole to guide the larger brad point bit halfway in from each side. No breakout. If the bit is sharp, there's usually no tearout on the entry either.


These users thanked the author bobgramann for the post: Cablepuller (Sun Feb 15, 2015 2:59 am)
Top
 Profile  
 
Mike OMelia
PostPosted: Sat Feb 14, 2015 9:26 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Feb 20, 2008 9:12 pm
Posts: 6994
First name: Mike
Last Name: O'Melia
City: Huntsville
State: Alabama
Focus: Build
Status: Semi-pro
What is a pillar drill? Is this a Euro name for a drill press?
Top
 Profile  
 
johnparchem
PostPosted: Sat Feb 14, 2015 9:28 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Aug 23, 2010 11:42 pm
Posts: 1714
First name: John
Last Name: Parchem
City: Seattle
State: Wa
Zip/Postal Code: 98177
Country: USA
Focus: Build
Status: Amateur
bobgramann wrote:
I drill all the way through with a small diameter bit. Then I use that hole to guide the larger brad point bit halfway in from each side. No breakout. If the bit is sharp, there's usually no tearout on the entry either.


This works really well if you are drilling 2 different diameters, Like a hole for the shaft and a larger one for the bushing of a tuner.

_________________
http://www.Harvestmoonguitars.com


These users thanked the author johnparchem for the post: Cablepuller (Sun Feb 15, 2015 4:21 pm)
Top
 Profile  
 
Cablepuller
PostPosted: Sun Feb 15, 2015 2:59 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Dec 14, 2014 1:26 pm
Posts: 214
Mike O'Melia wrote:
What is a pillar drill? Is this a Euro name for a drill press?

Yes mike its a british name for drill press
Cheers
Top
 Profile  
 
Mike OMelia
PostPosted: Mon Feb 16, 2015 10:13 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Feb 20, 2008 9:12 pm
Posts: 6994
First name: Mike
Last Name: O'Melia
City: Huntsville
State: Alabama
Focus: Build
Status: Semi-pro
Got it. :)


These users thanked the author Mike OMelia for the post: Cablepuller (Tue Feb 17, 2015 3:14 am)
Top
 Profile  
 
whiskywill
PostPosted: Tue Feb 17, 2015 10:57 am 
Offline
Cocobolo
Cocobolo

Joined: Mon Mar 18, 2013 8:21 am
Posts: 149
Location: Wales U.K.
First name: Anthony
Last Name: Lee
Country: Wales U.K.
Focus: Build
Status: Amateur
Alternatively, raid the nearest toy box. :shock:

Image


These users thanked the author whiskywill for the post: Cablepuller (Tue Feb 17, 2015 11:08 am)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: DennisK, Juergen and 31 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com