Official Luthiers Forum! • View topic

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

Endgraft with small cnc

Page 1 of 1

[ 18 posts ]

Print view

Previous topic | Next topic

Author

Message

weslewis

Post subject: Endgraft with small cnc

Posted: Sun Jun 08, 2014 7:57 pm

Contributing Member

Joined: Sun Jan 10, 2010 11:40 am
Posts: 764
First name: wes
Last Name: Lewis
City: Garland
State: Tx.
Zip/Postal Code: 75044
Focus: Build

Jig cut out on my small cnc, then inlay cut out with proper offset for purfling, fits like a glove..

You do not have the required permissions to view the files attached to this post.

_________________
MK5acoustics.com

Top

Bob Garrish

Post subject: Re: Endgraft with small cnc

Posted: Sun Jun 08, 2014 8:39 pm

Brazilian Rosewood

Joined: Tue May 02, 2006 9:02 am
Posts: 2351
Location: Canada
First name: Bob
Last Name: Garrish
City: Toronto
State: Ontario
Country: Canada
Status: Professional

Pretty!

_________________
Bob Garrish
Former Canonized Purveyor of Fine CNC Luthier Services

Top

John Sonksen

Post subject: Re: Endgraft with small cnc

Posted: Sun Jun 08, 2014 8:45 pm

Cocobolo

Joined: Wed May 30, 2012 11:00 pm
Posts: 498
First name: John
Last Name: Sonksen
City: PORTLAND
State: Oregon
Zip/Postal Code: 97216-2013
Country: United States
Focus: Build
Status: Amateur

what is that router bit arrangement? The picture is kind of dark so I can't quite make it out but it looks like a sleeve around a spiral bit? The graft looks great btw!

Nevermind, I see it's just a router guide. I thought it was something attached to the bit itself...

Last edited by John Sonksen on Sun Jun 08, 2014 8:58 pm, edited 1 time in total.

Top

weslewis

Post subject: Re: Endgraft with small cnc

Posted: Sun Jun 08, 2014 8:45 pm

Contributing Member

Joined: Sun Jan 10, 2010 11:40 am
Posts: 764
First name: wes
Last Name: Lewis
City: Garland
State: Tx.
Zip/Postal Code: 75044
Focus: Build

I love this thing, not as sophisticated as the stuff you big boys have , but very fun to work with.!!

_________________
MK5acoustics.com

Top

weslewis

Post subject: Re: Endgraft with small cnc

Posted: Sun Jun 08, 2014 8:46 pm

Contributing Member

Joined: Sun Jan 10, 2010 11:40 am
Posts: 764
First name: wes
Last Name: Lewis
City: Garland
State: Tx.
Zip/Postal Code: 75044
Focus: Build

the trimmer has a 1/4 inch downcut bit in a 3'8 inch guide bushing...

_________________
MK5acoustics.com

Top

John Sonksen

Post subject: Re: Endgraft with small cnc

Posted: Sun Jun 08, 2014 9:00 pm

Cocobolo

weslewis wrote:

the trimmer has a 1/4 inch downcut bit in a 3'8 inch guide bushing...

yep, spotted it after a closer look. How big is your CNC?

Top

Ed Haney

Post subject: Re: Endgraft with small cnc

Posted: Sun Jun 08, 2014 9:03 pm

Contributing Member

Joined: Thu Jul 16, 2009 2:19 pm
Posts: 614
Location: Sugar Land, TX
First name: Ed
Last Name: Haney
City: Sugar Land (Houston)
State: Texas
Zip/Postal Code: 77479
Country: USA
Focus: Build

Very nice, Wes.

Top

weslewis

Post subject: Re: Endgraft with small cnc

Posted: Sun Jun 08, 2014 9:12 pm

Contributing Member

Joined: Sun Jan 10, 2010 11:40 am
Posts: 764
First name: wes
Last Name: Lewis
City: Garland
State: Tx.
Zip/Postal Code: 75044
Focus: Build

Its a 6040 chinese cnc machine, bought off of ebay, has a cutting area of + o- 16 inches on the x axis and 24 on the y axis

_________________
MK5acoustics.com

Top

meddlingfool

Post subject: Re: Endgraft with small cnc

Posted: Sun Jun 08, 2014 9:28 pm

Brazilian Rosewood

Joined: Wed Feb 20, 2008 7:15 pm
Posts: 7492
First name: Ed
Last Name: Bond
City: Nanaimo
Country: Canada
Focus: Build
Status: Professional

Slick!

Did you make the router base too?

Top

weslewis

Post subject: Re: Endgraft with small cnc

Posted: Sun Jun 08, 2014 9:34 pm

Contributing Member

Joined: Sun Jan 10, 2010 11:40 am
Posts: 764
First name: wes
Last Name: Lewis
City: Garland
State: Tx.
Zip/Postal Code: 75044
Focus: Build

no that one I got from woodhaven, I was going to make a base but I don't have any 1/4 inch acrylic, here is a binding attachment I made with 1/2 inch acrylic..
uses are endless ...

You do not have the required permissions to view the files attached to this post.

_________________
MK5acoustics.com

Top

Quine

Post subject: Re: Endgraft with small cnc

Posted: Wed Jun 11, 2014 9:16 am

Koa

Joined: Thu Dec 18, 2008 11:42 am
Posts: 1135
Location: Hudson, MA
First name: Kevin
Last Name: Quine
City: Hudson
State: MA
Country: Usa
Focus: Build
Status: Amateur

Looks very pretty.....but shouldn't the herringbone point up on the right and down on the left??

Top

weslewis

Post subject: Re: Endgraft with small cnc

Posted: Wed Jun 11, 2014 9:38 am

Contributing Member

Joined: Sun Jan 10, 2010 11:40 am
Posts: 764
First name: wes
Last Name: Lewis
City: Garland
State: Tx.
Zip/Postal Code: 75044
Focus: Build

They aren't glued in.

_________________
MK5acoustics.com

Top

mkellyvrod

Post subject: Re: Endgraft with small cnc

Posted: Thu Jun 12, 2014 4:33 pm

Contributing Member

Joined: Thu Apr 19, 2012 11:10 am
Posts: 522
First name: Martin
Last Name: Kelly
City: Tampa
State: FL
Zip/Postal Code: 33634
Country: USA
Focus: Build
Status: Amateur

Very nice jigs, Wes!!!

Top

ChuckB

Post subject: Re: Endgraft with small cnc

Posted: Thu Jun 12, 2014 5:04 pm

Koa

Joined: Sat Mar 01, 2008 2:44 pm
Posts: 692

Looks great Wes! How hard do you think the learning curve would be for programming for a non savy computer operator, like myself?

Chuck

_________________
_________________

Top

weslewis

Post subject: Re: Endgraft with small cnc

Posted: Thu Jun 12, 2014 7:43 pm

Contributing Member

Joined: Sun Jan 10, 2010 11:40 am
Posts: 764
First name: wes
Last Name: Lewis
City: Garland
State: Tx.
Zip/Postal Code: 75044
Focus: Build

its not all that difficult, there is definitely a learning curve, that said I am not into the 3d stuff yet but I am working on that, its all in the software and a real good source of info is our own OLF forum in the cnc section...

_________________
MK5acoustics.com

Top

Joe Beaver

Post subject: Re: Endgraft with small cnc

Posted: Fri Jun 13, 2014 2:23 pm

Contributing Member

Joined: Thu Feb 09, 2006 2:35 pm
Posts: 2951
Location: United States
First name: Joe
Last Name: Beaver
City: Lake Forest
State: California
Focus: Build

I like what you are doing there Wes. Love to see it with the binding on.

_________________
Joe Beaver
Maker of Sawdust

Top

weslewis

Post subject: Re: Endgraft with small cnc

Posted: Sun Jun 15, 2014 9:39 pm

Contributing Member

Joined: Sun Jan 10, 2010 11:40 am
Posts: 764
First name: wes
Last Name: Lewis
City: Garland
State: Tx.
Zip/Postal Code: 75044
Focus: Build

binding and purfling installed, wood wet wet with naptha...wood is form " A TREE" laughing6-hehe

figured sapele..

You do not have the required permissions to view the files attached to this post.

_________________
MK5acoustics.com

Top

Lonnie J Barber

Post subject: Re: Endgraft with small cnc

Posted: Mon Jun 16, 2014 3:06 pm

Koa

Joined: Sat May 17, 2014 12:45 pm
Posts: 644
First name: Lonnie
Last Name: Barber
City: Manchester
State: Tennessee
Zip/Postal Code: 37355
Country: United States
Focus: Build
Status: Amateur

Very pretty. Not being knowledgeable concerning CNC I really don't know what your talking about. Very nice work though.

Sent from my iPhone using Tapatalk

Top

Page 1 of 1

[ 18 posts ]

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 33 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: