***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sun Jul 27, 2025 7:17 am


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 1 of 1
  [ 13 posts ] 
  Print view Previous topic | Next topic 
Author Message
Dkeddy27
PostPosted: Sun Jun 08, 2014 11:18 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Sep 08, 2012 9:45 am
Posts: 142
First name: David
Last Name: Eddy
City: Mandeville
State: La
Zip/Postal Code: 70448
Country: USA
Focus: Build
Status: Amateur
I thought this was a good idea to post!
I've heard too many stories of people cutting their thumbs on jigs like these! Just a couple of cut nails on the backside of my fretboard jig to keep my fingers away from the outfeed cut!
Image


These users thanked the author Dkeddy27 for the post: EddieLee (Mon Jun 09, 2014 10:54 am)
Top
 Profile  
 
Dkeddy27
PostPosted: Sun Jun 08, 2014 11:35 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Sep 08, 2012 9:45 am
Posts: 142
First name: David
Last Name: Eddy
City: Mandeville
State: La
Zip/Postal Code: 70448
Country: USA
Focus: Build
Status: Amateur
Image


These users thanked the author Dkeddy27 for the post: unkabob (Mon Jun 09, 2014 8:58 pm)
Top
 Profile  
 
Colin North
PostPosted: Mon Jun 09, 2014 12:52 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5583
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
Just remember to round off the nail ends!

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.
Top
 Profile  
 
Tom West
PostPosted: Mon Jun 09, 2014 3:40 am 
Offline
Contributing Member
Contributing Member

Joined: Sun Jan 27, 2008 4:10 pm
Posts: 2764
First name: Tom
Last Name: West
State: Nova Scotia
Country: Canada
Focus: Build
Status: Amateur
David: Nice going......! Planning SAFETY is always a GOOD plan...........!!
Tom

_________________
A person who has never made a mistake has never made anything!!!
Top
 Profile  
 
Alex Kleon
PostPosted: Mon Jun 09, 2014 6:35 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Mar 01, 2011 1:32 pm
Posts: 3470
First name: Alex
Last Name: Kleon
City: Whitby
State: Ontario
Zip/Postal Code: L1N8X2
Country: Canada
Focus: Build
Status: Amateur
That's a good idea, David. Maybe I should do that to the fridge door!

Alex

_________________
"Indecision is the key to flexibility" .... Bumper sticker
Top
 Profile  
 
Dkeddy27
PostPosted: Mon Jun 09, 2014 10:09 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Sep 08, 2012 9:45 am
Posts: 142
First name: David
Last Name: Eddy
City: Mandeville
State: La
Zip/Postal Code: 70448
Country: USA
Focus: Build
Status: Amateur
My Uncle lost his thumb to a Dado blade! Not a fun topic but I have 25 yrs of woodworking and I feel that I need these little reminders!!


These users thanked the author Dkeddy27 for the post: Bri (Mon Jun 09, 2014 11:33 pm)
Top
 Profile  
 
Andy Birko
PostPosted: Mon Jun 09, 2014 4:53 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Jun 12, 2008 6:59 am
Posts: 1964
Location: Rochester Michigan
I like to glue or screw a block of wood that will contain the blade completely after the work piece is completely cut. This is a quick and dirty jig but you get the idea. It's still not completely foolproof but it's pretty good.


You do not have the required permissions to view the files attached to this post.

_________________
http://www.birkonium.com CNC Products for Luthiers
http://banduramaker.blogspot.com
Top
 Profile  
 
RusRob
PostPosted: Mon Jun 09, 2014 5:16 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Mar 19, 2013 3:34 pm
Posts: 1097
First name: Bob
Last Name: Russell
State: Michigan USA
Focus: Repair
Status: Semi-pro
Thats one of the reasons I like my radial arm saw. You always know where the blade is.

Bob
Top
 Profile  
 
cphanna
PostPosted: Tue Jun 10, 2014 9:31 pm 
Offline
Koa
Koa

Joined: Sat Apr 19, 2008 10:08 pm
Posts: 1958
Location: Missouri
First name: Patrick
Last Name: Hanna
State: Missouri
Country: USA
Simple, obvious (once you show it to us) and appropriate. I think it's a great idea. Thank you.
Top
 Profile  
 
Quine
PostPosted: Tue Jun 17, 2014 3:15 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Dec 18, 2008 11:42 am
Posts: 1135
Location: Hudson, MA
First name: Kevin
Last Name: Quine
City: Hudson
State: MA
Country: Usa
Focus: Build
Status: Amateur
Nice idea....simple and effective. I might have to steal that one!!
Top
 Profile  
 
Ruby50
PostPosted: Wed Jun 18, 2014 6:31 am 
Offline
Contributing Member
Contributing Member

Joined: Sun Feb 17, 2013 4:58 pm
Posts: 1449
First name: Ed
Last Name: Minch
City: Chestertown
State: MD
Zip/Postal Code: 21620
Country: United States
Focus: Build
Status: Amateur
Andy

If your jig extends to the left edge of the table saw table, you can bolt on a stop along the edge of the table that prevents the jig from going any further. I find that this in combination with the large block that keeps the blade buried makes it very safe.

Here are a couple of shots with the luthier-in-training in the background

https://www.flickr.com/photos/ruby1638/ ... 822400747/

Ed
Top
 Profile  
 
Andy Birko
PostPosted: Mon Jun 23, 2014 1:12 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Jun 12, 2008 6:59 am
Posts: 1964
Location: Rochester Michigan
Excellent idea, Ed. That's probably about as fool proof as you can get!

_________________
http://www.birkonium.com CNC Products for Luthiers
http://banduramaker.blogspot.com
Top
 Profile  
 
gozierdt
PostPosted: Mon Jun 23, 2014 1:26 pm 
Offline
Contributing Member
Contributing Member

Joined: Tue Nov 21, 2006 4:02 pm
Posts: 801
Location: United States
First name: Gene
Last Name: Zierdt
City: Sebastopol
State: CA
Zip/Postal Code: 95472
Country: USA
Focus: Build
Status: Amateur
Great Idea!! I'm going to copy it on my jig. My first thought was "I don't
need that, I always know where my fingers are in relation to the blade".
But then I remember the time I almost amputated the tip of my #2 fretting
finger- Doctor told me it wasn't an "official" amputation because the tip
was still attached by a tiny flap of skin. So I'll use this tip...

_________________
Gene

Politicians and diapers must be changed often, and for the same reason- Mark Twain
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 13 posts ] 

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: Chris Ide and 24 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com