sanding orange peel out?

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

sanding orange peel out?

Page 1 of 1

[ 2 posts ]

Print view

Previous topic | Next topic

Author

Message

sprouseod

Post subject: sanding orange peel out?

Posted: Sun Feb 10, 2013 8:20 pm

Contributing Member

Joined: Fri Mar 28, 2008 8:35 am
Posts: 348
Location: Spartanburg SC
First name: Richard
Last Name: Sprouse
City: Spartanburg
State: SC
Zip/Postal Code: 29302
Country: USA
Focus: Build
Status: Amateur

Finishing is definitely not my forte. I'm trying the new PolyWhey and have 2 coats down but some orange peel. Do I try to level this out before applying the next coat or just keep going?

Thanks
Richard

Top

Joe Beaver

Post subject: Re: sanding orange peel out?

Posted: Mon Feb 11, 2013 1:48 am

Contributing Member

Joined: Thu Feb 09, 2006 2:35 pm
Posts: 2951
Location: United States
First name: Joe
Last Name: Beaver
City: Lake Forest
State: California
Focus: Build

Never used polywhey but with KTM 9 I just keep going. The next morning I would level sand and spray some more until I have at least a dozen coats. After another three days or so I level sand again. If no sand through I let it cure a few weeks, do the wet sand thing to about 6000 grit then buff. Beautiful

_________________
Joe Beaver
Maker of Sawdust

Top

Page 1 of 1

[ 2 posts ]

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 8 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:

Official Luthiers Forum!

Forum rules

sanding orange peel out?

Who is online