***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sun Aug 10, 2025 1:12 am


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 
  Print view Previous topic | Next topic 
Author Message
LarryH
 Post subject: Wavy Walnut
PostPosted: Tue Feb 05, 2013 12:03 pm 
Offline
Contributing Member
Contributing Member

Joined: Tue Jan 03, 2006 1:47 pm
Posts: 1624
Location: United States
First name: Larry
Last Name: Hawes
Focus: Build
Status: Amateur
I'm bending some black walnut over a hot iron and got some short choppy 'waves' in the bend. Used quite a bit of water and wondered if that could cause it?

_________________
Thank You and Best To All
Top
 Profile  
 
Tony_in_NYC
 Post subject: Re: Wavy Walnut
PostPosted: Tue Feb 05, 2013 1:06 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Oct 12, 2010 9:01 pm
Posts: 3031
First name: Tony
Last Name: C
City: Brooklyn
State: NY
Focus: Build
Status: Amateur
You might be going to fast. Walnut bends pretty easily so you should not get those waves. Are you rocking the wood and heating more than just the small area on the iron?

_________________
http://www.CostaGuitars.com
PMoMC
Top
 Profile  
 
Kent Chasson
 Post subject: Re: Wavy Walnut
PostPosted: Tue Feb 05, 2013 1:15 pm 
Offline
Koa
Koa
User avatar

Joined: Fri Mar 23, 2007 9:56 am
Posts: 1271
Are you talking about across the side? If so, it is usually due to slab or mixed grain. Less water would help but probably won't eliminate it.

If it's flamed walnut and the waves are along the bend, you're probably just getting some faceting where the grain changes direction. Not much to do about that but less water is pretty much always better.

_________________
http://www.chassonguitars.com
Top
 Profile  
 
Rodger Knox
 Post subject: Re: Wavy Walnut
PostPosted: Tue Feb 05, 2013 1:20 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri Jun 22, 2012 11:12 am
Posts: 1170
First name: Rodger
Last Name: Knox
City: Baltimore
State: MD
Zip/Postal Code: 21234
Country: USA
Focus: Build
Status: Amateur
Could be too much water, or not enough heat for the amount of water you used.
Any water should be gone by the time you finish bending, at least with walnut.
It's been a while since I bent walnut, but IIRC, just a spritz of water was enough.

_________________
A man hears what he wants to hear, and disreguards the rest. Paul Simon
Top
 Profile  
 
LarryH
 Post subject: Re: Wavy Walnut
PostPosted: Tue Feb 05, 2013 5:23 pm 
Offline
Contributing Member
Contributing Member

Joined: Tue Jan 03, 2006 1:47 pm
Posts: 1624
Location: United States
First name: Larry
Last Name: Hawes
Focus: Build
Status: Amateur
Kent Chasson wrote:
Are you talking about across the side? If so, it is usually due to slab or mixed grain. Less water would help but probably won't eliminate it.

If it's flamed walnut and the waves are along the bend, you're probably just getting some faceting where the grain changes direction. Not much to do about that but less water is pretty much always better.


I think the flame is causing the issue Kent and faceting is probably the best term for what I'm seeing.. I'll try a little less water.

BTW I'm bending at .083" - .088", can I go thinner?

_________________
Thank You and Best To All
Top
 Profile  
 
LarryH
 Post subject: Re: Wavy Walnut
PostPosted: Tue Feb 05, 2013 5:24 pm 
Offline
Contributing Member
Contributing Member

Joined: Tue Jan 03, 2006 1:47 pm
Posts: 1624
Location: United States
First name: Larry
Last Name: Hawes
Focus: Build
Status: Amateur
Tony_in_NYC wrote:
You might be going to fast. Walnut bends pretty easily so you should not get those waves. Are you rocking the wood and heating more than just the small area on the iron?


Actually have begun to do more of the 'rocking' Tony and it's helping, thanks for the tip.

_________________
Thank You and Best To All
Top
 Profile  
 
Kent Chasson
 Post subject: Re: Wavy Walnut
PostPosted: Tue Feb 05, 2013 5:59 pm 
Offline
Koa
Koa
User avatar

Joined: Fri Mar 23, 2007 9:56 am
Posts: 1271
LarryH wrote:
Kent Chasson wrote:
Are you talking about across the side? If so, it is usually due to slab or mixed grain. Less water would help but probably won't eliminate it.

If it's flamed walnut and the waves are along the bend, you're probably just getting some faceting where the grain changes direction. Not much to do about that but less water is pretty much always better.


I think the flame is causing the issue Kent and faceting is probably the best term for what I'm seeing.. I'll try a little less water.

BTW I'm bending at .083" - .088", can I go thinner?


I wouldn't go thinner than .080" partly because the faceting needs to be sanded out. Less water and maybe a spring-steel backer on the tight sections should help.

If you are getting end grain lifting or fracturing then a little more heat or a little slower bending may help too.

_________________
http://www.chassonguitars.com
Top
 Profile  
 
LarryH
 Post subject: Re: Wavy Walnut
PostPosted: Tue Feb 05, 2013 7:59 pm 
Offline
Contributing Member
Contributing Member

Joined: Tue Jan 03, 2006 1:47 pm
Posts: 1624
Location: United States
First name: Larry
Last Name: Hawes
Focus: Build
Status: Amateur
Kent Chasson wrote:
LarryH wrote:
Kent Chasson wrote:
Are you talking about across the side? If so, it is usually due to slab or mixed grain. Less water would help but probably won't eliminate it.

If it's flamed walnut and the waves are along the bend, you're probably just getting some faceting where the grain changes direction. Not much to do about that but less water is pretty much always better.


I think the flame is causing the issue Kent and faceting is probably the best term for what I'm seeing.. I'll try a little less water.

BTW I'm bending at .083" - .088", can I go thinner?


I wouldn't go thinner than .080" partly because the faceting needs to be sanded out. Less water and maybe a spring-steel backer on the tight sections should help.

If you are getting end grain lifting or fracturing then a little more heat or a little slower bending may help too.


Thanks very much for the advice Kent

_________________
Thank You and Best To All
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: Colin North, TimAllen and 39 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com