***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Mon Jul 28, 2025 7:34 am


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 1 of 1
  [ 16 posts ] 
  Print view Previous topic | Next topic 
Author Message
SteveSmith
PostPosted: Fri Jul 13, 2012 10:14 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7473
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
I've got two boxes with rough necks that are ready to go together and I'm interested in trying a plain butt joint. Can some of you share how you do your butts?

_________________
Steve Smith
"Music is what feelings sound like"
Top
 Profile  
 
Tony_in_NYC
PostPosted: Fri Jul 13, 2012 10:39 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Oct 12, 2010 9:01 pm
Posts: 3031
First name: Tony
Last Name: C
City: Brooklyn
State: NY
Focus: Build
Status: Amateur
I do squats. They keep my butt tight. It's bathing suit season after all.

_________________
http://www.CostaGuitars.com
PMoMC
Top
 Profile  
 
jac68984
PostPosted: Fri Jul 13, 2012 11:23 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 14, 2010 11:43 am
Posts: 668
First name: Aaron
Last Name: Craig
City: Kansas City
State: Missouri
Focus: Build
Status: Semi-pro
jac68984 wrote:
Mike,

I, like Filippo, use a simple heel or butt style neck joint with two brass inserts. Check out Kathy Matsushita's website: http://home.comcast.net/~kathymatsushit ... ive22.html

She has some pictures of the process that may clarify some of your questions. The link is to one size 5 guitar she built, but if you go to the main page, there are other projects that similarly describe the process.

I really like this neck joint. Seems plenty strong, super easy to fit, and I can't tell any difference in the amount of sustain/tone from similarly built guitars with other types of neck joints like dovetail or M&T. I don't really see a downside to it. Many other builders, from Taylor to well respected members of this forum, have used such a joint to build many, many guitars.

Aaron


The above is from an older post. I've since tried out some other types of joint to facilitate thinner heels, but I still really like a simple butt joint when neck design permits it.

_________________
Aaron Craig


Last edited by jac68984 on Tue Jul 17, 2012 9:59 pm, edited 1 time in total.

Top
 Profile  
 
CharlieT
PostPosted: Fri Jul 13, 2012 11:48 am 
Offline
Contributing Member
Contributing Member

Joined: Sun Mar 14, 2010 12:00 pm
Posts: 2020
Location: Utah
Steve - I'm interested in using a butt joint on my next build too, so this thread is of great interest to me. Thanks for starting it.

I'm curious about the sequence used by those who use a butt joint. Do you set the neck angle and then drill for and install the bolts, and then shape the neck? Or, do you shape the neck and get everything lined up, both "vertically" and "horizontally", and install the bolts before shaping the neck? Obviously, I have not thought this through very well yet.

Steve - hopefully my question is of interest to you as well, and thus won't be considered a hijack. :mrgreen:
Top
 Profile  
 
jfmckenna
PostPosted: Fri Jul 13, 2012 12:04 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue May 13, 2008 10:44 am
Posts: 6262
Location: Virginia
What I do is pre drill the holes in the neck block and counter sink them. I drill the holes slightly larger than the bolts to handle any play necessary to line things up. I then build my neck blank and rough cut the heal dimensions. Then set the neck angle using a straight edge to measure the bridge height at the saddle location accounting for fretboard thickness and fret wire height. I clamp the neck to the body with a long clamp from the tail block to the heal. Once that is set I drill the holes for the brass inserts and then epoxy them in. They are drilled about 1/8in deep, not flush, to facilitate a neck reset in the future. Then I glue on the fretboard and shape the neck.

Simple as that.
Top
 Profile  
 
SteveSmith
PostPosted: Fri Jul 13, 2012 1:31 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7473
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
Tony_in_NYC wrote:
I do squats. They keep my butt tight. It's bathing suit season after all.


I knew it was coming Tony duh

Charlie, you can't hijack this one cause it's an open discussion.


jfmckenna wrote:
What I do is pre drill the holes in the neck block and counter sink them. I drill the holes slightly larger than the bolts to handle any play necessary to line things up. I then build my neck blank and rough cut the heal dimensions. Then set the neck angle using a straight edge to measure the bridge height at the saddle location accounting for fretboard thickness and fret wire height. I clamp the neck to the body with a long clamp from the tail block to the heal. Once that is set I drill the holes for the brass inserts and then epoxy them in. They are drilled about 1/8in deep, not flush, to facilitate a neck reset in the future. Then I glue on the fretboard and shape the neck.

Simple as that.


Ok, so my boxes are built - how do you drill the holes with the neck clamped on? I was just going to mark them, take off the neck, and then drill them square to the surface.

_________________
Steve Smith
"Music is what feelings sound like"
Top
 Profile  
 
jfmckenna
PostPosted: Fri Jul 13, 2012 1:42 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue May 13, 2008 10:44 am
Posts: 6262
Location: Virginia
SteveSmith wrote:
Tony_in_NYC wrote:
I do squats. They keep my butt tight. It's bathing suit season after all.


I knew it was coming Tony duh

Charlie, you can't hijack this one cause it's an open discussion.


jfmckenna wrote:
What I do is pre drill the holes in the neck block and counter sink them. I drill the holes slightly larger than the bolts to handle any play necessary to line things up. I then build my neck blank and rough cut the heal dimensions. Then set the neck angle using a straight edge to measure the bridge height at the saddle location accounting for fretboard thickness and fret wire height. I clamp the neck to the body with a long clamp from the tail block to the heal. Once that is set I drill the holes for the brass inserts and then epoxy them in. They are drilled about 1/8in deep, not flush, to facilitate a neck reset in the future. Then I glue on the fretboard and shape the neck.

Simple as that.


Ok, so my boxes are built - how do you drill the holes with the neck clamped on? I was just going to mark them, take off the neck, and then drill them square to the surface.


Oh yeah I need to be more clear. I measure where the holes are supposed to be and then drill. The neck is not clamped on. I used to reach in with the drill bit used to drill the holes and scratch the mark on the heal block but I found it more accurate to just measure from the top edge of the guitar to the center of the hole. I then take a combination ruler and slide the metal level angle guide thingie off and rest that on the block with the neck in a vise to guide my drilling straight.
Top
 Profile  
 
Tony_in_NYC
PostPosted: Fri Jul 13, 2012 1:58 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Oct 12, 2010 9:01 pm
Posts: 3031
First name: Tony
Last Name: C
City: Brooklyn
State: NY
Focus: Build
Status: Amateur
SteveSmith wrote:
Tony_in_NYC wrote:
I do squats. They keep my butt tight. It's bathing suit season after all.


I knew it was coming Tony duh



Everyone has a role in life. Mine is to be the comic relief when I am not being uber serious about lutherie and my day job.

_________________
http://www.CostaGuitars.com
PMoMC
Top
 Profile  
 
CharlieT
PostPosted: Fri Jul 13, 2012 2:15 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Mar 14, 2010 12:00 pm
Posts: 2020
Location: Utah
jfmckenna wrote:
What I do is pre drill the holes in the neck block and counter sink them. I drill the holes slightly larger than the bolts to handle any play necessary to line things up. I then build my neck blank and rough cut the heal dimensions. Then set the neck angle using a straight edge to measure the bridge height at the saddle location accounting for fretboard thickness and fret wire height. I clamp the neck to the body with a long clamp from the tail block to the heal. Once that is set I drill the holes for the brass inserts and then epoxy them in. They are drilled about 1/8in deep, not flush, to facilitate a neck reset in the future. Then I glue on the fretboard and shape the neck.

Simple as that.


Thanks jf, that helps a lot. Seems pretty straight forward.
Top
 Profile  
 
CharlieT
PostPosted: Fri Jul 13, 2012 2:17 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Mar 14, 2010 12:00 pm
Posts: 2020
Location: Utah
Tony_in_NYC wrote:
Everyone has a role in life. Mine is to be the comic relief when I am not being uber serious about lutherie and my day job.


I for one appreciate the comic relief, Tony.
Top
 Profile  
 
Alex Kleon
PostPosted: Fri Jul 13, 2012 2:48 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Mar 01, 2011 1:32 pm
Posts: 3470
First name: Alex
Last Name: Kleon
City: Whitby
State: Ontario
Zip/Postal Code: L1N8X2
Country: Canada
Focus: Build
Status: Amateur
Tony - how do you calculate how much comic relief is necessary? Do you just keep on turning on the truss rod until something pops? laughing6-hehe laughing6-hehe laughing6-hehe
Tony_in_NYC wrote:
SteveSmith wrote:
Tony_in_NYC wrote:
I do squats. They keep my butt tight. It's bathing suit season after all.


I knew it was coming Tony duh



Everyone has a role in life. Mine is to be the comic relief when I am not being uber serious about lutherie and my day job.

_________________
"Indecision is the key to flexibility" .... Bumper sticker
Top
 Profile  
 
meddlingfool
PostPosted: Fri Jul 13, 2012 4:16 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Feb 20, 2008 7:15 pm
Posts: 7547
First name: Ed
Last Name: Bond
City: Nanaimo
Country: Canada
Focus: Build
Status: Professional
I built a simple jig that registers from the top. It is a block of Baltic birch 1" thick that hangs from the top with the location holes drilled through. Hang it from the guitar top for the body, hang from the fingerboard surface for the neck. Eezy peezy!
Top
 Profile  
 
jac68984
PostPosted: Fri Jul 13, 2012 4:19 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 14, 2010 11:43 am
Posts: 668
First name: Aaron
Last Name: Craig
City: Kansas City
State: Missouri
Focus: Build
Status: Semi-pro
Not yet mentioned is the smart idea of inserting a dowel into the heel block to protect against end grain insert tearout. Additionally, I rout down the inside of the area of the heal that will be butted against the guitar so that all that touches is a bit more than 1/8 of outside edges of the heel (sort of similar to angling the cuts of a dovetail neck to ensure a tight check fit). Much easier to get a nice neck/body fit that way. Kathy's tutorial covers both issues well.

_________________
Aaron Craig


Last edited by jac68984 on Tue Jul 17, 2012 9:58 pm, edited 1 time in total.

Top
 Profile  
 
jfmckenna
PostPosted: Fri Jul 13, 2012 5:17 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue May 13, 2008 10:44 am
Posts: 6262
Location: Virginia
meddlingfool wrote:
I built a simple jig that registers from the top. It is a block of Baltic birch 1" thick that hangs from the top with the location holes drilled through. Hang it from the guitar top for the body, hang from the fingerboard surface for the neck. Eezy peezy!


A picture is worth a thousand words.

//

I've never done the dowel method though it's probably not a bad idea. I just embed my inserts in epoxy and so far so good. I also flood the end grain with thin CA mostly to finish off the end grain.
Top
 Profile  
 
SteveSmith
PostPosted: Fri Jul 13, 2012 5:21 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7473
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
Thanks everyone (including Tony for the comic relief - always needed) for the info. Between these posts and Kathy's blog I think I can get this done without any problems.

_________________
Steve Smith
"Music is what feelings sound like"
Top
 Profile  
 
meddlingfool
PostPosted: Fri Jul 13, 2012 7:44 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Feb 20, 2008 7:15 pm
Posts: 7547
First name: Ed
Last Name: Bond
City: Nanaimo
Country: Canada
Focus: Build
Status: Professional
I've yet to master the art of getting photos on this forum...;)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 16 posts ] 

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: doncaparker and 14 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com