Official Luthiers Forum!

I just build a board and affix it to the shop ceiling, or a shelf, and use the bench. I've used the floor before. A mobile unit would be more ideal in terms of access to all parts of the workpiece, but I simply don't have the space for it.

You don't need to over think this. All you need are two surfaces a certain distance apart that can take a bit of pressure.

Here's a pic of mine on the left side. It has three casters between the base and cabinet it sits on with a bolt to keep it on center, so I can rotate the go bar deck as needed.

Chuck

_________________
_________________