Official Luthiers Forum! • View topic

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

00 Body

Page 1 of 1

[ 7 posts ]

Print view

Previous topic | Next topic

Author

Message

Darryl Young

Post subject: 00 Body

Posted: Wed Nov 23, 2011 11:27 am

Contributing Member

Joined: Wed Oct 22, 2008 9:31 pm
Posts: 1877
First name: Darryl
Last Name: Young
State: AR
Country: USA
Focus: Build
Status: Amateur

While I have a tracing of the braces and a mold and bending form for a Martin 00 body from John Hall, I don't have dimensions of the side profile. The websites I've looked at have the body depth at the tail at 4 1/8" (same as a 000) but I haven't found the depth at the neck block. Is that the correct depth? Can someone give me the depth at the neck block?

This is deeper than I would have expected for a 00 body. For the folks that have built or played a 00 body, does the depth work ok? What are your thoughts about decreasing the depth a bit?

_________________
Formerly known as Adaboy.......

Top

WilliamS

Post subject: Re: 00 Body

Posted: Wed Nov 23, 2011 11:54 am

Contributing Member

Joined: Tue Mar 11, 2008 12:28 pm
Posts: 383
First name: William
Last Name: Snyder
City: Brooklyn
State: NY
Country: United States
Focus: Build
Status: Amateur

If I recall Martin 00's are 3 1/4" at the neck block and 4 1/8" at the tail. I have definitely played some older 00's that were more like 4", though. I think that most builders are in the 4-4 1/4 range.

Top

MikeyV

Post subject: Re: 00 Body

Posted: Wed Nov 23, 2011 1:33 pm

Contributing Member

Joined: Wed Feb 23, 2011 1:04 pm
Posts: 295
First name: Mike
Last Name: Vallandigham
City: Martinez
State: CA
Country: USA
Focus: Build
Status: Amateur

The numbers I've heard, and the ones I go with are 3-1/4" at the neck and 4-1/16" at the tail. These are Martin's standard dimensions (I believe)

These include the top and back plates.

Top

Mark Chinworth

Post subject: Re: 00 Body

Posted: Thu Nov 24, 2011 1:47 am

Mahogany

Joined: Sat Nov 19, 2011 2:20 pm
Posts: 50
First name: Mark
Last Name: Chinworth
City: Kirkwood
State: MO
Zip/Postal Code: 63122
Country: United States
Focus: Build
Status: Amateur

Christophe Grellier has some nice plans on his website

http://www.grellier.fr/plans.php?lang=en

His plans show 3-3/8" at the neck block including the soundboard and back

Top

Darryl Young

Post subject: Re: 00 Body

Posted: Thu Nov 24, 2011 11:24 am

Contributing Member

Joined: Wed Oct 22, 2008 9:31 pm
Posts: 1877
First name: Darryl
Last Name: Young
State: AR
Country: USA
Focus: Build
Status: Amateur

Thanks everyone for the feedback! Appreciated.

_________________
Formerly known as Adaboy.......

Top

Clay S.

Post subject: Re: 00 Body

Posted: Fri Nov 25, 2011 6:17 pm

Brazilian Rosewood

Joined: Sun Mar 30, 2008 8:20 am
Posts: 5968

For a 12 fret OO I usually go 4 1/4 at the tail and 3 1/2 at the neck. I think the OO are usually deeper than the OOO's.

Top

Page 1 of 1

[ 7 posts ]

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: stumblin and 11 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: