***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sat Aug 16, 2025 5:38 am


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 2 of 2
  [ 29 posts ]  Go to page Previous  1, 2
  Print view Previous topic | Next topic 
Author Message
Steve Kinnaird
PostPosted: Tue Jun 21, 2011 11:35 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Jan 05, 2005 3:45 pm
Posts: 4337
Location: United States
David Newton wrote:
Steve,
Right, I miss typed about the fret #, that is how I usually do it, but this is a 50's Gibson LG-1 and I've picked the dot as the closest thing, I can drill a bigger hole, so only one, and I have a matching dot on hand. I'm not doing a fret job and don't want to mess with pulling a fret...




Got it, and glad the neck is now off! It always seems like it's downhill after that.

Steve

_________________
From Nacogdoches...the oldest town in Texas.

http://www.stephenkinnaird.com
Top
 Profile  
 
David Newton
PostPosted: Wed Jun 22, 2011 6:36 am 
Offline
Koa
Koa
User avatar

Joined: Tue Oct 30, 2007 9:13 am
Posts: 1168
Location: United States
State: Texas
Focus: Repair
Status: Professional
Mike, that tea kettle can put out a pretty good blast of steam, I had to keep it on a very low fire to control it.

Steve, I ended up going thru the 15th fret and had to aim "uphill" to get the gap. The dot marker would have been about the same, except aiming downhill.
I knew that Gibson necks are a bit more of a struggle to remove, and this one was. The cheeks were glued to the sides...

_________________
https://www.facebook.com/profile.php?id=100008907949110
Top
 Profile  
 
Arnt Rian
PostPosted: Wed Jun 22, 2011 10:03 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Aug 26, 2005 5:49 pm
Posts: 2915
Location: Norway
I did a Norlin era Gibson Hummingbird recently, and it had a straight (not tapered) dovetail. It also had a cracked neck block (and sides, and cracked just about everything), and some yuk-y type of glue everywhere. Combined, it made it a quite 'interesting' neck reset. [xx(]

_________________
Rian Gitar og Mandolin
Top
 Profile  
 
David Newton
PostPosted: Wed Jun 22, 2011 11:33 am 
Offline
Koa
Koa
User avatar

Joined: Tue Oct 30, 2007 9:13 am
Posts: 1168
Location: United States
State: Texas
Focus: Repair
Status: Professional
Hi Arnt,
I've never seen a straight tenon Gibson joint, but I haven't seen everything either.

I saw a Gibson SJ-200 with the top glued on OVER the dovetail tenon! gaah
I didn't remove the neck, just saw it. The person resetting the neck was knowledgeable about these, and removed the fretboard first.

_________________
https://www.facebook.com/profile.php?id=100008907949110
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 2 of 2
  [ 29 posts ]  Go to page Previous  1, 2

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: NikolayUsalf and 39 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com