Official Luthiers Forum!

My compressor has no regulator on the output and goes up to 150 psi, so I need to get a regulator.
I was going to get an ingersoll rand but I noticed this one for 30 bucks more has a filter too.
http://www.northerntool.com/shop/tools/ ... 1031_41031
Think this would be good enough for spraying finishes with or should I just get the regulator and a really good filter later on when I need to spray?

Thanks guys

That one shows $89.00 , Milton is a fairly well known brand . If you can get THAT one for $30.00 then its a good deal and yes it basically what I use and have no problems with my spraying .

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/