Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Jun 26, 2025 7:48 am


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: Zpoxy Application
PostPosted: Wed Feb 23, 2011 11:21 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
I have a Mando that I want to rework a little bit . It has been lacq. and I want to do more pore fill and sand and relaq. WILL the zpoxy adhere to the existing laq. ? Or am i asking for trouble here ? If it wont what would be bast way to proceed ? idunno

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
 Post subject: Re: Zpoxy Application
PostPosted: Wed Feb 23, 2011 7:25 pm 
Offline
Koa
Koa
User avatar

Joined: Sat Jun 24, 2006 12:41 pm
Posts: 975
Location: United States
First name: Tracy
Last Name: Leveque
City: Denver
State: CO
Country: USA
Focus: Build
Status: Amateur
I've never tried it, but then again, I wouldn't even attempt to try this. Zpoxy is used to fill the pores in bare wood, and will fill the pores in open wood very well. But I don't think it would work on top of lacquer.

I've done this before with great results:
In EIR: Applied zpoxy to bare wood and filled pores over 3 sessions. Applied about 10 coats of light shellac. Found that there were still some pores showing, so used medium viscosity super glue to fill the remaining pores and sand back flat. Then start applying shellac again. I couldn't find the spots where I added super glue, and it still looks good after 2 years. Just an idea, but you might want to experiment first. Good luck!

_________________
Tracy
http://www.luthiersuppliers.com


Top
 Profile  
 
 Post subject: Re: Zpoxy Application
PostPosted: Wed Feb 23, 2011 7:58 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Feb 02, 2008 4:01 pm
Posts: 1104
Location: Winfield, IL.
You're asking for trouble Jim. At this point, drop fill with lacquer. If the remaining pores are too numerous for drop filling, your best course of action would be to strip and refinish.

Steve


Top
 Profile  
 
 Post subject: Re: Zpoxy Application
PostPosted: Thu Feb 24, 2011 9:32 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
thanks guys , its kind of what i was thinking but needed to hear it from someone else as well .

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: banjopicks, Chris Ide, doncaparker and 12 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com