***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Mon Jun 30, 2025 6:23 am


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 1 of 1
  [ 18 posts ] 
  Print view Previous topic | Next topic 
Author Message
1bordeaux
 Post subject: Cam clamp source
PostPosted: Sat Jan 08, 2011 4:48 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Wed Jan 18, 2006 4:04 am
Posts: 313
Location: United States
First name: Paul
Last Name: Bordeaux
City: Massena
State: New York
Zip/Postal Code: 13662
Country: US
Focus: Build
Status: Professional
Hey Guys,

Anyone have a good source for cam clamps? I'm looking for a couple dozen. Don't have the luxury of time to make them though!

Got an upright bass waiting to have the top glued back on!

Thanks,
Paul

_________________
Paul Bordeaux
http://www.bordeauxinlay.com
Top
 Profile  
 
Edward Taylor
 Post subject: Re: Cam clamp source
PostPosted: Sat Jan 08, 2011 4:54 pm 
Offline
Koa
Koa
User avatar

Joined: Sun Jun 21, 2009 6:34 pm
Posts: 1058
Country: Canada
Hi Paul, how quickly do you need them? I am going to be making a large batch soon.
Top
 Profile  
 
bluescreek
 Post subject: Re: Cam clamp source
PostPosted: Sat Jan 08, 2011 4:56 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Mon Jan 28, 2008 5:21 am
Posts: 4914
Location: Central PA
First name: john
Last Name: hall
City: Hegins
State: pa
Zip/Postal Code: 17938
Country: usa
Focus: Build
Status: Professional
http://grizzly.com/products/searchresul ... amps&new=1
these are a decent clamp

_________________
John Hall
blues creek guitars
Authorized CF Martin Repair
Co President of ASIA
You Don't know what you don't know until you know it
Top
 Profile  
 
DennisK
 Post subject: Re: Cam clamp source
PostPosted: Sat Jan 08, 2011 5:12 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jan 22, 2010 9:59 pm
Posts: 3616
First name: Dennis
Last Name: Kincheloe
City: Kansas City
State: MO
Country: USA
Focus: Build
Status: Amateur
I got my 6 from here http://usaclamp.com/CamClampPage.aspx. Some of my most used tools [:Y:] Plus they're a buck cheaper if you buy 10 of the same size, which I suspect would be the case if you're using them for gluing a top on.

You could also whip up a batch of spool clamps instead of using cams (although if you don't have a few cams already, you definitely should get some). They're only about a buck apiece if you make them yourself, and quick to mass produce. Just buy a few 6ft threaded rods, box of wing nuts, some dowels, a roll of cork, and go to town. I think it took me 2 days to make my batch of 30, but it shouldn't be too tough to get more than that done in one.
Top
 Profile  
 
timoM
 Post subject: Re: Cam clamp source
PostPosted: Sat Jan 08, 2011 6:52 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Wed Jun 02, 2010 7:35 pm
Posts: 280
First name: tim
Last Name: minkkinen
City: charlotte
State: nC
Zip/Postal Code: 28203
Country: united States
Focus: Build
Status: Amateur
+1 on usaclamps, their alum bar clamps are great too. If wetzler made a cam clamp there might be a choice. T
Top
 Profile  
 
Jim Kirby
 Post subject: Re: Cam clamp source
PostPosted: Sat Jan 08, 2011 6:56 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue Nov 29, 2005 11:44 am
Posts: 2186
Location: Newark, DE
First name: Jim
Last Name: Kirby
Focus: Build
Status: Amateur
I got all mine from Lee Valley, although I have heard you can get the Klemsia's cheaper in bulk through one of the hardware vendors who I can't remember. Lee Valley prices are decent for the Klemsia's. A number of people have commented on earlier threads that the Grizzly clamps are dreck, in contrast to some comments above. I have not used them personally so I don't know, just passing along hearsay.

_________________
Jim Kirby
kirby@udel.edu
Top
 Profile  
 
1bordeaux
 Post subject: Re: Cam clamp source
PostPosted: Sat Jan 08, 2011 9:01 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Wed Jan 18, 2006 4:04 am
Posts: 313
Location: United States
First name: Paul
Last Name: Bordeaux
City: Massena
State: New York
Zip/Postal Code: 13662
Country: US
Focus: Build
Status: Professional
Wow, I knew I could count on you guys!

Ed, I should have looked for these before the Holidays, so I need them pretty quick, plus the shop is full of inlays waiting to be completed....

P.M. me if you have a minute and give me an idea of time frame, please.

Paul

_________________
Paul Bordeaux
http://www.bordeauxinlay.com
Top
 Profile  
 
KEColeman
 Post subject: Re: Cam clamp source
PostPosted: Sun Jan 09, 2011 9:49 pm 
Offline
Walnut
Walnut
User avatar

Joined: Sun Jan 09, 2011 6:56 pm
Posts: 5
First name: Keith Edward
Last Name: Coleman
City: Albuquerque
State: NM
Zip/Postal Code: 87120
Country: USA
Focus: Build
Status: Semi-pro
I have been building and selling cam clamps for a couple of years. Check out on my site and let me know what you need. American hard maple steel pins, aluminum backbar.

_________________
Its amazing what you find when you clean behind the bandsaw............

Keith Edward Coleman
Albuquerque, NM
http://www.wckc.us
Top
 Profile  
 
KEColeman
 Post subject: Re: Cam clamp source
PostPosted: Sun Jan 09, 2011 9:50 pm 
Offline
Walnut
Walnut
User avatar

Joined: Sun Jan 09, 2011 6:56 pm
Posts: 5
First name: Keith Edward
Last Name: Coleman
City: Albuquerque
State: NM
Zip/Postal Code: 87120
Country: USA
Focus: Build
Status: Semi-pro
I have been building and selling cam clamps for a couple of years. Check out on my site and let me know what you need. American hard maple steel pins, aluminum backbar.

_________________
Its amazing what you find when you clean behind the bandsaw............

Keith Edward Coleman
Albuquerque, NM
http://www.wckc.us
Top
 Profile  
 
Paul Burner
 Post subject: Re: Cam clamp source
PostPosted: Sun Jan 09, 2011 10:52 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Feb 28, 2008 11:45 pm
Posts: 730
Location: Lincoln, NE
First name: Paul
Last Name: Burner
City: Lincoln
State: Nebraska
Zip/Postal Code: 68506
Country: United States
Focus: Build
Status: Amateur
bluescreek wrote:
http://grizzly.com/products/searchresults.aspx?q=cam%20clamps&new=1
these are a decent clamp


John,

I purchased some Shop Fox clamps as shown on your Grizzly link a couple years ago (although not from Grizzly).

The 4" Shop Fox clamps I purchased seem to work pretty good - but all the 6" ones I purchased were junk.

I personally wouldn't purchase them again.

Have you had better luck with these?

_________________
P A U L B U R N E R
Burner Guitars
Top
 Profile  
 
Miketobey
 Post subject: Re: Cam clamp source
PostPosted: Mon Jan 10, 2011 9:13 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Dec 01, 2005 11:38 am
Posts: 639
Location: United States
Hard to beat StewMac--6 or more at $13.12 for the short and comparable for the long throat. I will say that when I can, I like to buy from the "little" guys, though. When one of our members did a run years ago, I bought some from him.
Top
 Profile  
 
AlBDarned
 Post subject: Re: Cam clamp source
PostPosted: Mon Jan 10, 2011 11:34 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Mon May 03, 2010 2:19 pm
Posts: 262
First name: Al
Last Name: Darned
City: Toronto
Country: Canada
Focus: Build
Status: Amateur
Edward Taylor wrote:
Hi Paul, how quickly do you need them? I am going to be making a large batch soon.


Hey Edward - can you let me know when you're planning to go? I am likely interested! bliss

_________________
If trees could scream, would we be so cavalier about cutting them down? We might, if they screamed all the time, for no good reason. - Jack Handey
Top
 Profile  
 
Edward Taylor
 Post subject: Re: Cam clamp source
PostPosted: Mon Jan 10, 2011 11:40 am 
Offline
Koa
Koa
User avatar

Joined: Sun Jun 21, 2009 6:34 pm
Posts: 1058
Country: Canada
Hi Al, I am just setting up the shop for production and looking for a used mortiser. Should be starting this week.
I will PM you when I get some made. I go down to the city usually once a month so should be able to avoid shipping if you can wait.
Top
 Profile  
 
AlBDarned
 Post subject: Re: Cam clamp source
PostPosted: Mon Jan 10, 2011 12:29 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Mon May 03, 2010 2:19 pm
Posts: 262
First name: Al
Last Name: Darned
City: Toronto
Country: Canada
Focus: Build
Status: Amateur
Edward Taylor wrote:
Hi Al, I am just setting up the shop for production and looking for a used mortiser. Should be starting this week.
I will PM you when I get some made. I go down to the city usually once a month so should be able to avoid shipping if you can wait.


sounds great:) I'm in no rush ... still just gearing up (eternally it seems), but really need to finish a few more renos before I can get away with too much else.... so don't hurry on account of me:)

_________________
If trees could scream, would we be so cavalier about cutting them down? We might, if they screamed all the time, for no good reason. - Jack Handey
Top
 Profile  
 
Edward Taylor
 Post subject: Re: Cam clamp source
PostPosted: Mon Jan 10, 2011 12:47 pm 
Offline
Koa
Koa
User avatar

Joined: Sun Jun 21, 2009 6:34 pm
Posts: 1058
Country: Canada
Just out of curiosity, your not the same Al from CWW forum that makes guitars, are you?
Top
 Profile  
 
AlBDarned
 Post subject: Re: Cam clamp source
PostPosted: Mon Jan 10, 2011 1:02 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Mon May 03, 2010 2:19 pm
Posts: 262
First name: Al
Last Name: Darned
City: Toronto
Country: Canada
Focus: Build
Status: Amateur
nope, don't even know what that stands for idunno ... plus i don't really make guitars yet anyway, more at the intention / aspiration stage still ... gaah

_________________
If trees could scream, would we be so cavalier about cutting them down? We might, if they screamed all the time, for no good reason. - Jack Handey
Top
 Profile  
 
Howard Klepper
 Post subject: Re: Cam clamp source
PostPosted: Mon Jan 10, 2011 1:19 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Tue Jan 25, 2005 6:16 am
Posts: 2692
bluescreek wrote:
http://grizzly.com/products/searchresults.aspx?q=cam%20clamps&new=1
these are a decent clamp


I bought a few of these a few years ago and they are useless crap.

_________________
Howard Klepper
http://www.klepperguitars.com

When all else fails, clean the shop.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 18 posts ] 

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 31 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com