Official Luthiers Forum! • View topic

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

Cutting wood binding

Page 1 of 1

[ 6 posts ]

Print view

Previous topic | Next topic

Author

Message

Greenman

Post subject: Cutting wood binding

Posted: Thu Nov 11, 2010 8:39 pm

Cocobolo

Joined: Sat Apr 07, 2007 5:07 am
Posts: 161
Location: Ulster Park, New York
First name: Bill
Last Name: Sterling
City: Ulster Park
State: New York
Zip/Postal Code: 12487
Country: United States
Focus: Build
Status: Amateur

I have a couple guitars going that I want to put wood binding on. I would like to cut my own binding as I have alot of scrap figured wood. What is the process to get clean sides for the binding? I would like to here what others process is and the pros and cons. Thanks :mrgreen:

_________________
Mistakes are mandatory-learning from them is optional. http://www.opensourceluthiersupply.com

Top

meddlingfool

Post subject: Re: Cutting wood binding

Posted: Thu Nov 11, 2010 8:41 pm

Brazilian Rosewood

Joined: Wed Feb 20, 2008 7:15 pm
Posts: 7539
First name: Ed
Last Name: Bond
City: Nanaimo
Country: Canada
Focus: Build
Status: Professional

I use my fretsltting blade, a zero clearance insert, and a featherboard on the topside.

Top

Mark Maquillan

Post subject: Re: Cutting wood binding

Posted: Thu Nov 11, 2010 8:51 pm

Contributing Member

Joined: Tue Apr 17, 2007 3:50 am
Posts: 305
Location: Central Washington United States

I use a Freud 7 1/4 blade on my table saw. Works great.

_________________
Wisdom is justified by her children

Top

clutch

Post subject: Re: Cutting wood binding

Posted: Thu Nov 11, 2010 8:54 pm

Walnut

Joined: Sun Nov 08, 2009 9:08 pm
Posts: 7
First name: Donald
Last Name: Kahny
City: guilford
State: iN
Zip/Postal Code: 47022
Country: usa
Focus: Build
Status: Amateur

I cut on the table saw, then smooth with a thickness sander.

Don

Top

Michael Smith

Post subject: Re: Cutting wood binding

Posted: Thu Nov 11, 2010 9:35 pm

Cocobolo

Joined: Thu Mar 11, 2010 1:02 am
Posts: 214
Location: Sebastopol, CA
First name: Michael
Last Name: Smith
City: Graton
State: CA
Zip/Postal Code: 95444
Country: USA
Focus: Build
Status: Amateur

I cut to a little over 1/4 inch, Then drum sand to desired height, then rip strips a little over desired thickness then drum sand to desired thickness. I find I can pur 5 or 6 thru the sander at a time.

_________________
http://goatrockukulele.com

Top

Alexandru Marian

Post subject: Re: Cutting wood binding

Posted: Fri Nov 12, 2010 3:14 am

Brazilian Rosewood

Joined: Thu Mar 22, 2007 10:59 pm
Posts: 2103
Location: Bucharest, Romania
Country: Romania
Focus: Build
Status: Professional

There was an informative and long topic about this not too long ago, worth a search.

_________________
Build log

Top

Page 1 of 1

[ 6 posts ]

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: Michaeldc and 33 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: