***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Wed Aug 13, 2025 5:19 pm


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 1 of 1
  [ 11 posts ] 
  Print view Previous topic | Next topic 
Author Message
weslewis
PostPosted: Mon Oct 04, 2010 10:36 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Jan 10, 2010 11:40 am
Posts: 764
First name: wes
Last Name: Lewis
City: Garland
State: Tx.
Zip/Postal Code: 75044
Focus: Build
what woods are better adapted for bending a cutaway..and what should I avoid..I have a fox style bender with a cutaway press, I have it equiped with a PID to control the blanket..I have bent an OM and a OOO but no cutaway...I bent some Bubinga which was easy , but I was bending some amazon rosewood today for a OM that I am currently bulding and found it to be very hard and somewhat brittle and was thinnking there was no way that that would bend the tight cutaway...I was wanting to use cocobolo but I have only bent cocobolo bindings which seemed easy enough, I have the molds built for a dreadnought cutaway. Any advise would be greatly appreciated...

_________________
MK5acoustics.com
Top
 Profile  
 
LaurieW
PostPosted: Mon Oct 04, 2010 10:49 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Apr 25, 2007 8:39 am
Posts: 515
Focus: Build
Status: Amateur
I bend by hand, but no issues so far bending Black Walnut (unfigured), Figured Oregon Myrtle and Mad Rosewood for venetian cutaways.....

_________________
____________________________________
Time you enjoy wasting is not wasted time.
Top
 Profile  
 
meddlingfool
PostPosted: Tue Oct 05, 2010 2:32 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Feb 20, 2008 7:15 pm
Posts: 7551
First name: Ed
Last Name: Bond
City: Nanaimo
Country: Canada
Focus: Build
Status: Professional
Don't know how many guitars you've made (ie: bending experience) but my first cutaways were EIR which I find bends real cooperatively.
Top
 Profile  
 
Mark Groza
PostPosted: Tue Oct 05, 2010 8:23 am 
Offline
Koa
Koa
User avatar

Joined: Tue Apr 01, 2008 8:51 am
Posts: 1310
Location: Michigan,U.S.A.
Focus: Build
Status: Professional
I find Ash will also take a tight bend.
Top
 Profile  
 
Laurent Brondel
PostPosted: Tue Oct 05, 2010 8:44 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Aug 31, 2005 7:30 am
Posts: 1792
Location: United States
Cocobolo, like EIR, is a dream to bend. Most rosewoods are. Check for and avoid runout, on any piece.

_________________
Laurent Brondel
West Paris, Maine - USA
http://www.laurentbrondel.com/
Top
 Profile  
 
Hupaand
PostPosted: Tue Oct 05, 2010 10:53 am 
Offline
Cocobolo
Cocobolo

Joined: Tue Dec 23, 2008 8:36 pm
Posts: 287
First name: Hugh
Last Name: Anderson
City: Lake Oswego
State: oregon
I broke 3 pieces of mahogany before I got it right, on the pipe.
Top
 Profile  
 
Terence Kennedy
PostPosted: Tue Oct 05, 2010 11:28 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Dec 14, 2007 3:21 pm
Posts: 3446
Location: Alexandria MN
Todd Stock wrote:
EIR, cocobolo, or walnut...NOT curly anigre or figured mahogany. You can increase your chances of a successful bend in most highly figured woods (non-rosewoods) by using SuperSoft II.


What's your schedule for using Super Soft to bend sides Todd?

_________________
It's not what you don't know that hurts you, it's what you do know that's wrong.
Top
 Profile  
 
Mike Collins
PostPosted: Tue Oct 05, 2010 1:11 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Mar 06, 2006 10:10 pm
Posts: 2485
Location: Argyle New York
First name: Mike/Mikey/Michael/hey you!
Last Name: Collins
City: Argyle
State: New York
Zip/Postal Code: 12809
Country: U.S.A. /America-yea!!
Focus: Build
Status: Professional
Quarter sawn rosewoods & Imbuia !
You san make pretzels with these woods!
I'd take the cutaway thickness down to .070
Or 1.8mm

Mike

_________________
Mike Collins
Top
 Profile  
 
Howard Klepper
PostPosted: Tue Oct 05, 2010 1:38 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Tue Jan 25, 2005 6:16 am
Posts: 2692
Cocobolo is easy.

I hear bubinga is hard to bend. So you are probably ahead of the game.

_________________
Howard Klepper
http://www.klepperguitars.com

When all else fails, clean the shop.
Top
 Profile  
 
weslewis
PostPosted: Tue Oct 05, 2010 7:52 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Jan 10, 2010 11:40 am
Posts: 764
First name: wes
Last Name: Lewis
City: Garland
State: Tx.
Zip/Postal Code: 75044
Focus: Build
Thanks I appreciate the advise.!!!!

_________________
MK5acoustics.com
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 11 posts ] 

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: Melt in the Sun, Michaeldc, Mike Thomas and 33 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com