Official Luthiers Forum!

Some of you may be interested in this.

Six years ago I made a "dream guitar" for my 50th birthday present - a European Spruce/African Blackwood 13 frets clear of the body guitar called “Butterfly” :



It was called "Butterfly" because of the figure on the back:



This was my ninth guitar and although sounding good there has always been a little something lacking to make it "great" - the African Blackwood is so full of overtones and with my current abilities I wanted to make it "great". I left the back and sides far too thick for African Blackwood and the funky shape with large upper bout of the “Butterfly” was to take full advantage of the butterfly figure of the back.

I came up with a more elegant shape that still shows off the figure. It has “similarish” size to the Torres style classical guitar “El Levantine” that Colin Symonds made for me that has a Caucasian spruce top so when Colin kindly gave me a Caucasian spruce set it became obvious to me where it should end up. With a 13.5" lower bout it's similar in size to a Martin O sized guitar. Taking apart, rebuilding and eventually recycling all of the pieces of a guitar is an interesting challenge in itself and I have a low boredom threshold, so in June and July this year the “Butterfly” became “Féileacán” – the Gaelic for Butterfly.

In wood terms this guitar is almost fully transcontinental. Europe is represented by the cherry and lime end-blocks, the European spruce linings, and the sycamore neck, Asia (just) by the Caucasian spruce top, Africa by the African Blackwood b/s and fingerboard, Australasia by the Curly eucalyptus binding, North America by the Lutz bracing and South America by the Katalox rosette and headstock veneer and Brazilian Rosewood bridge. I don’t think wood grows in the Arctic and Antartic regions but I could be wrong.

Here are some pictures of the finished guitar. It is 630-660mm multiscale with 13 frets clear of the body:






Well . . . I say finished but I haven't got round to making the wooden tuner buttons yet The guitar has been strung up for nearly a month now and I'm happy with the result. Today I did a first recording - a lovely waltz written by English guitarist Ken Nicol called I.H. It's from his album Initial Variations and each tune is wtitten for someone that has influence his life and is titled by their initials. He calls this one his "Scottish Tune". It's in DADGAD Capo 3, and was recorded with my usual set up of an AKG C1000S microphone mixed down with flat EQ and no added effects:

I.H

I did a photo documentary of the deconstruction and reconstruction here on the Luthier Community Forum.

_________________
Dave White
De Faoite Stringed Instruments
". . . the one thing a machine just can't do is give you character and personalities and sometimes that comes with flaws, but it always comes with humanity" Monty Don talking about hand weaving, "Mastercrafts", Weaving, BBC March 2010

VERY NICE Dave!!! It looks great, and sounds great too! And your playing isn't too shabby either!

Cheers,
Dave F.

_________________
Cambrian Guitars

"There goes Mister Tic-Tac out the back with some bric-brac from the knick-knack rack"

Think of it....! A person would never have to spend money on wood again. Start with a jumbo and 10 insturments later your down to a uke....! Congrats Dave ...!!! You've more guts then me. Nice production indeed.
Tom

_________________
A person who has never made a mistake has never made anything!!!

Looks and sounds sweet!!

Chuck

_________________
_________________

Wow! Nice!

_________________
Formerly known as Adaboy.......

Cool metamorphosis Dave, the butterfly was re-born, and with such a lovely sound too. I did much the same with my very first guitar. I stripped it down to the bare essentials and rebuilt it, changing it to a left hand cut-away for a friend of mine. Reconstuction can can really put your skills (and patience) to the test.

Bill

_________________
Dream to be a luthier