Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sat Aug 09, 2025 6:25 pm


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: ash blocks
PostPosted: Mon Jun 14, 2010 4:24 pm 
Online
Contributing Member
Contributing Member

Joined: Tue May 18, 2010 6:42 pm
Posts: 589
First name: Brian
Last Name: Itzkin
State: NY/Granada
Country: USA/Spain
Focus: Build
Hi, just out of curiosity, would ash work for the head and heal block of a guitar? Thanks


Top
 Profile  
 
 Post subject: Re: ash blocks
PostPosted: Mon Jun 14, 2010 8:23 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Feb 02, 2008 4:01 pm
Posts: 1104
Location: Winfield, IL.
Yes, Ash will work just fine for heel and tail blocks. It is a bit heavier than other woods that you could use, but thats not such a big deal. Other than the traditional Mahogany, I've used Cherry, Walnut and Baltic Birch plywood.


Top
 Profile  
 
 Post subject: Re: ash blocks
PostPosted: Mon Jun 14, 2010 8:35 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Feb 01, 2008 8:47 am
Posts: 1244
Location: Montreal, Canada
Focus: Build
Status: Amateur
Yep, no problem, other than the fact that it slightly heavier than usual, as Steven mentioned. (Although some mahoganies are quite heavy too...)

_________________
Alain Moisan
Former full time builder of Acoustics, Classicals and Flamencos.
(Now building just for fun!)


Top
 Profile  
 
 Post subject: Re: ash blocks
PostPosted: Tue Jun 15, 2010 12:16 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Nov 03, 2006 6:50 pm
Posts: 2711
Location: Victoria, BC
First name: John
Last Name: Abercrombie
Status: Amateur
oval soundhole wrote:
Hi, just out of curiosity, would ash work for the head and heal block of a guitar? Thanks


Brian-
Just about any wood will do the job, though generally folks seem to pick woods that are easy to work/sand/plane, fine grained, and light weight- if using solid wood. Ash wouldn't be my first choice unless I wanted to add weight to the guitar body (to balance a heavy neck?). If you can't get mahogany, then something like poplar/willow or even basswood would be good candidates for end blocks, IMO. Spruce has also been used for blocks. Sometimes solid-wood blocks are laminated to get the grain orientation 'right' and also to add some split-resistance.
Ash has been used successfully for laminated/solid linings - its good bending qualities are an advantage there.
BTW, though the naming of blocks isn't 'standardized' at all, it's more common to refer to them as the tail block and neck block. 'Heel block' can be confusing because it usually refers to the block that the (heel of the) neck attaches to, while many people think of the 'end' of the guitar when they hear the 'heel' word.

Cheers
John


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: bobgramann, oval soundhole and 45 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com