Official Luthiers Forum!

Hopefully someone can help me out here. Forgive my lack of knowledge in this department. I don't know the terminology so I'll just try to be descriptive.

I've already checked my local Lowes, Home Depot, Sherwin Williams and Kelley Moore paints stores.

What I'm looking for is replacement parts that connect to the bottom of the gun. In the bottom of the gun was a Male/Female Aluminium piece. That piece then screwed into the aluminum piece that connected to the hose. This piece also had a small threaded hole with a fitting that connected the small pressure hose to the siphon feed gun. I'm looking for all of those pieces, but don't know where to start.

I would also like to find the piece that connects to the main air line, but without the small hole & fitting /pressure hose.

I bought a gravity feed conversion kit, but that piece was female, where the original one was male so I have no way to connect that.

Anyone know of a place online that would carry these replacement parts?

Best Regards,

_________________
Thanks,
Blain

http://www.ullrichguitar.com

"89.67% of all statistics are made up on the spot."

Try here.

http://www.fujispray.com/parts_accessories.htm

René

Thanks Rene, I actually saw that site as well, but they don't show any of the parts that I'm looking for.

I have emailed a couple of places to see if they have what I'm looking for. For now I'll just keep my fingers crossed.

I basically rouned some corners when trying to takes these loose. I was surprised to see that straight from the factory, there was no Anti-Seeze put on the threads of these aluminum parts. Really made taking them loose a pain.

_________________
Thanks,
Blain

http://www.ullrichguitar.com

"89.67% of all statistics are made up on the spot."

Blain,
Have you tried calling them or email? The website says they manufacture the equipment so surely they can steer you to the parts or some service center. Anyway, that's what I think. Good luck finding your parts and btw the mini-mite 3 is on my wish list. Maybe in 2011.

René

I have emailed them and another place, but since it's Sunday I don't think they're working.

Hopefully I'll get something from them tomorrow and can at least be pointed in the right direction of where to go.

You'll love the Mini Mite 3 (or 4) or whatever you decide to get. It makes the whole process easy to do.

_________________
Thanks,
Blain

http://www.ullrichguitar.com

"89.67% of all statistics are made up on the spot."

For anyone interested, this guy seems to have everything for the Fuji systems.

He got me hooked up and shipped out same day.

http://www.hvlpsales.com/

_________________
Thanks,
Blain

http://www.ullrichguitar.com

"89.67% of all statistics are made up on the spot."