***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sat Aug 09, 2025 1:59 am


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 2 of 2
  [ 38 posts ]  Go to page Previous  1, 2
  Print view Previous topic | Next topic 
Author Message
Terence Kennedy
PostPosted: Tue Feb 16, 2010 9:25 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Dec 14, 2007 3:21 pm
Posts: 3445
Location: Alexandria MN
I've been gluing the bridge, Countersinking the pinholes, cutting the pin taper, and then slotting straight with the jigsaw just deep enough to accept the string. Then finish and ramp with the files. I copied Tony Karol's bridge making jigs a couple of years ago and they put the pinholes in line with the saddle slot. That makes the ramping a lot easier as the break angles are more consistent.

_________________
It's not what you don't know that hurts you, it's what you do know that's wrong.
Top
 Profile  
 
Bobc
PostPosted: Tue Feb 16, 2010 9:57 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2004 9:42 pm
Posts: 4217
Location: Buffalo, NY
First name: Robert
Last Name: Cefalu
City: Buffalo
State: NY
Zip/Postal Code: 14217
Country: US
I grind the end of a Bosch blade so it fits into the handle for exacto blades. Makes for easy blade changes.

_________________
Beautiful and unusual tone woods at a reasonable price.
http://www.rctonewoods.com/RCT_Store
The Zootman
1109 Military Rd.
Kenmore, NY 14217
(716) 874-1498
Top
 Profile  
 
Rod True
PostPosted: Tue Feb 16, 2010 10:05 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Jan 04, 2005 10:03 am
Posts: 6680
Location: Abbotsford, BC Canada
Jigsaw here too. Very simple, accurate and fast....

_________________
My Facebook Guitar Page

"There's really no wrong way, as long as the results are what's desired." Charles Fox

"We have to constantly remind ourselves what we're doing....No Luthier is putting a man on the moon!" Harry Fleishman

"Generosity is always different in the eye of the person who didn't receive anything, but who wanted some." Waddy Thomson
Top
 Profile  
 
Hank Mauel
PostPosted: Wed Feb 17, 2010 9:36 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Jul 04, 2006 4:09 am
Posts: 841
Location: Auburn, California
First name: Hank
Last Name: Mauel
City: Auburn
State: CA
Zip/Postal Code: 95603
Focus: Build
Status: Professional
When the power goes off, mine still works. ;)

Basic jig saw blade set into an old foam brush handle.


You do not have the required permissions to view the files attached to this post.

_________________
Hank Mauel
Top
 Profile  
 
Rod True
PostPosted: Thu Feb 18, 2010 2:18 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Jan 04, 2005 10:03 am
Posts: 6680
Location: Abbotsford, BC Canada
Hank Mauel wrote:
When the power goes off, mine still works. ;)



That's the time to go drink the beer in the fridge otherwise it will just start getting warm...... LOL

_________________
My Facebook Guitar Page

"There's really no wrong way, as long as the results are what's desired." Charles Fox

"We have to constantly remind ourselves what we're doing....No Luthier is putting a man on the moon!" Harry Fleishman

"Generosity is always different in the eye of the person who didn't receive anything, but who wanted some." Waddy Thomson
Top
 Profile  
 
Paul Burner
PostPosted: Thu Feb 18, 2010 2:41 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Feb 28, 2008 11:45 pm
Posts: 730
Location: Lincoln, NE
First name: Paul
Last Name: Burner
City: Lincoln
State: Nebraska
Zip/Postal Code: 68506
Country: United States
Focus: Build
Status: Amateur
Rod True wrote:
Hank Mauel wrote:
When the power goes off, mine still works. ;)



That's the time to go drink the beer in the fridge otherwise it will just start getting warm...... LOL



Sounds like it's time for me to go trip that circuit breaker again that kills the power to the house!!!!

_________________
P A U L B U R N E R
Burner Guitars
Top
 Profile  
 
sanaka
PostPosted: Thu Feb 18, 2010 3:07 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Wed Oct 28, 2009 3:05 am
Posts: 168
First name: Rob
Last Name: Thompson
Focus: Build
Status: Amateur
Todd Stock wrote:
The Bosch T101AO or similar blade works great for this job, and as mentioned, just epoxy or CA into a handle or dowel scrap. Helps to grind off some of the back on the blade. Worth making up a couple...use a thin, finer toothed metal blade for slotting the B and E, and the wider T101AO for the wound strings. Replacement tool handles from Woodcraft work well for this job, or just whip up a couple on the lathe.


How do folks widen the slots for the fatter strings? I found the kerf of this blade to be ~.045", whereas the low E slot wants to be ~.08. I also found interestingly that the doubled back and twisted portion of the string that goes in the slot is fatter on the B than the G, I guess because the G core wire is smaller than the B. I ended up making this set of saws using the Bosch T101AO blades. The two fatter ones use two of the blades laminated together.

Image

I never dreamed of using the blades as intended - in an actual jigsaw - but reading here makes that sound like a plan, again though not sure how to do the wider slots?

Peace,
Sanaka

_________________
...imagine there were no hypothetical situations...
Top
 Profile  
 
letseatpaste
PostPosted: Thu Feb 18, 2010 4:00 pm 
Offline
Koa
Koa

Joined: Mon May 09, 2005 1:41 am
Posts: 1157
Location: Siloam Springs, AR
All of a sudden I'm hungry for corndogs.

_________________
______________________________
Jonathan Kendall, Siloam Springs AR
Top
 Profile  
 
WaddyThomson
PostPosted: Thu Feb 18, 2010 4:06 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Mar 19, 2007 7:05 am
Posts: 9191
Location: United States
First name: Waddy
Last Name: Thomson
City: Charlotte
State: NC
Focus: Build
Status: Semi-pro
Is it an Arkansas thing? :D

_________________
Waddy

Photobucket Build Album Library

Sound Clips of most of my guitars
Top
 Profile  
 
Pat Foster
PostPosted: Thu Feb 18, 2010 4:34 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat May 17, 2008 1:11 pm
Posts: 2390
Location: Spokane, Washington
First name: Pat
Last Name: Foster
Country: USA
Focus: Build
WaddyThomson wrote:
Is it an Arkansas thing? :D


Nope. We use bridge pin slots clear up here in Washington too.

Pat

_________________
formerly known around here as burbank
_________________

http://www.patfosterguitars.com
Top
 Profile  
 
Michael.N.
PostPosted: Thu Feb 18, 2010 5:54 pm 
Offline
Koa
Koa

Joined: Thu Sep 10, 2009 4:01 pm
Posts: 1887
Location: UK
sanaka wrote:
Todd Stock wrote:
The Bosch T101AO or similar blade works great for this job, and as mentioned, just epoxy or CA into a handle or dowel scrap. Helps to grind off some of the back on the blade. Worth making up a couple...use a thin, finer toothed metal blade for slotting the B and E, and the wider T101AO for the wound strings. Replacement tool handles from Woodcraft work well for this job, or just whip up a couple on the lathe.


How do folks widen the slots for the fatter strings? I found the kerf of this blade to be ~.045", whereas the low E slot wants to be ~.08. I also found interestingly that the doubled back and twisted portion of the string that goes in the slot is fatter on the B than the G, I guess because the G core wire is smaller than the B. I ended up making this set of saws using the Bosch T101AO blades. The two fatter ones use two of the blades laminated together.

Image

I never dreamed of using the blades as intended - in an actual jigsaw - but reading here makes that sound like a plan, again though not sure how to do the wider slots?

Peace,
Sanaka



You can simply use a round needle file after cutting with your jigsaw blade.
Top
 Profile  
 
WaddyThomson
PostPosted: Thu Feb 18, 2010 7:54 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Mar 19, 2007 7:05 am
Posts: 9191
Location: United States
First name: Waddy
Last Name: Thomson
City: Charlotte
State: NC
Focus: Build
Status: Semi-pro
Pat Foster wrote:
WaddyThomson wrote:
Is it an Arkansas thing? :D


Nope. We use bridge pin slots clear up here in Washington too.

Pat


It was about the corn dog comment, Pat. I thought every serious steel string builder used string slots.

_________________
Waddy

Photobucket Build Album Library

Sound Clips of most of my guitars
Top
 Profile  
 
Hank Mauel
PostPosted: Thu Feb 18, 2010 8:24 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Jul 04, 2006 4:09 am
Posts: 841
Location: Auburn, California
First name: Hank
Last Name: Mauel
City: Auburn
State: CA
Zip/Postal Code: 95603
Focus: Build
Status: Professional
Paul Burner wrote:
Rod True wrote:
Hank Mauel wrote:
When the power goes off, mine still works. ;)



That's the time to go drink the beer in the fridge otherwise it will just start getting warm...... LOL



Sounds like it's time for me to go trip that circuit breaker again that kills the power to the house!!!!


Nah..I was refering to when the guy who HAS been drinking all his "warming" beer takes out the local power pole while driving down to the store for another 6 pack or four! ;)
I already figured out the circuit breaker usage! duh

_________________
Hank Mauel
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 2 of 2
  [ 38 posts ]  Go to page Previous  1, 2

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 36 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com