Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sun Jul 27, 2025 4:38 pm


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 31 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: taping off the bridge
PostPosted: Sun Mar 15, 2009 7:08 pm 
Offline
Walnut
Walnut

Joined: Sat Dec 13, 2008 8:58 pm
Posts: 39
I was wondering what you guys prefer to do about your bridge location during finishing, is it better to locate the bridge position then mask off that area or do you just finish the guitar then locate the bridge and scrape the finish off, which do you feel is better for the first timer?


Top
 Profile  
 
PostPosted: Sun Mar 15, 2009 7:21 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Oct 17, 2006 3:52 am
Posts: 1289
City: Lawrence
State: Kansas
Zip/Postal Code: 66047
Status: Amateur
finish the guitar then locate the bridge and scrape the finish off
No real reason, thats just the way is was taught.
I'm interested in hearing others do it

_________________
Say what you do, Do what you say.


Top
 Profile  
 
PostPosted: Sun Mar 15, 2009 8:57 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Mon Feb 25, 2008 12:06 pm
Posts: 157
I've scraped the few I've completed. Not hard, just a bit slow. Mario recommends routing off the finish, and I may give that a try next time around. I was going to try masking, but Michael posted here that this would be problematic with french polish.

_________________
Gabriel Regalbuto
Carlsbad, California
Freedom 35!


Top
 Profile  
 
PostPosted: Sun Mar 15, 2009 9:04 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Mon Jan 28, 2008 5:21 am
Posts: 4915
Location: Central PA
First name: john
Last Name: hall
City: Hegins
State: pa
Zip/Postal Code: 17938
Country: usa
Focus: Build
Status: Professional
I like to mask off the fretboard and bridge before finish. It doesn't matter how you do it. This is a case of pick the method you like . I think you will find about half of use mask and the other half don't. If you do mask you have to be sure you have the bridge correct.
john

_________________
John Hall
blues creek guitars
Authorized CF Martin Repair
Co President of ASIA
You Don't know what you don't know until you know it


Top
 Profile  
 
PostPosted: Sun Mar 15, 2009 10:08 pm 
Offline
Koa
Koa
User avatar

Joined: Mon Feb 18, 2008 10:01 pm
Posts: 1655
Location: Jacksonville Florida
First name: Chris
City: Jacksonville
State: Florida
Focus: Build
Status: Amateur
well I'll tell you this....

I spent 2 hours today monkeying around with the 'scrape off the finish' way of doing it....and if I ever manage to show up at the person's house whom somehow managed to get this idea out into the guitar making world....I'm gonna kick him as hard as I can.

I hated it.

So I will spend as much time as it takes to find a way to TAPE the bridge area BEFORE FINISHING. That way I won't have to deal with the razor blade and the scraping.

For what it's worth...my opinion is if your finished film thickness isn't greater than about 3 thou.....taping should be fine. You may have to score it a little with a razor blade but that would be a hell of a lot easier than scraping the entire bridge footprint. If you like to run super thick finishes then it may be a problem.

_________________
There is no difference between the man that thinks he can....and the man that thinks he cannot.


Top
 Profile  
 
PostPosted: Sun Mar 15, 2009 10:19 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Jan 04, 2005 10:03 am
Posts: 6680
Location: Abbotsford, BC Canada
After scribing around the bridge into the finish material, a warm chisel makes removal of the finish easier. Also, I've made a small scraper from a hacksaw blade which is really good for getting into small corners. I've also read some builders who use a stripping agent to get most of the finish off, than just scrape up to the scribed line.

All this takes some care to perform of course, one slip of the chisel and bad words start to come out of ones mouth :oops:

_________________
My Facebook Guitar Page

"There's really no wrong way, as long as the results are what's desired." Charles Fox

"We have to constantly remind ourselves what we're doing....No Luthier is putting a man on the moon!" Harry Fleishman

"Generosity is always different in the eye of the person who didn't receive anything, but who wanted some." Waddy Thomson


Top
 Profile  
 
PostPosted: Sun Mar 15, 2009 10:45 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri May 09, 2008 2:25 pm
Posts: 1958
First name: George
City: Seattle
State: WA
Country: USA
Focus: Build
Status: Amateur
I've had much better luck masking things off before finishing. I tried the stripper/scraper method but didn't like the results. Keep in mind that I am an amateur.

_________________
George :-)


Top
 Profile  
 
PostPosted: Mon Mar 16, 2009 12:57 am 
Offline
Contributing Member
Contributing Member

Joined: Wed Feb 02, 2005 3:14 am
Posts: 2590
Location: United States
Taping. It's the best way for me after trying the total scrape and the paint stripper (which still must be followed by a light scrape)...the router thing was just too scary to consider...I know Mario does it, but heck, he carves necks with a CHAIN GRINDER!!!! :D So, I tape.

_________________
http://www.presnallguitars.com


Top
 Profile  
 
PostPosted: Mon Mar 16, 2009 1:32 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Nov 26, 2005 7:32 pm
Posts: 1969
Location: United States
Why not do the Rick Turner method? Superglue the bridge right to the finish. It works with cat urethane - no idea about anything else.

_________________
"An adventure is only an inconvenience rightly considered. An inconvenience is an adventure wrongly considered." G. K. Chesterton.


Top
 Profile  
 
PostPosted: Mon Mar 16, 2009 5:17 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Nov 11, 2005 3:32 am
Posts: 2687
Location: Ithaca, New York, United States
I'm about to try out the mask method for the first time. Scraping for the bridge was not my cup of tea. I ordered some frisket film from Dick Blick art supplies - a great vendor, by the way, of all kinds of very useful stuff. I'll let you know how it goes.

_________________
Todd Rose
Ithaca, NY

https://www.dreamingrosesecobnb.com/todds-art-music

https://www.facebook.com/ToddRoseGuitars/


Top
 Profile  
 
PostPosted: Mon Mar 16, 2009 8:05 am 
Offline
Koa
Koa
User avatar

Joined: Mon Feb 18, 2008 10:01 pm
Posts: 1655
Location: Jacksonville Florida
First name: Chris
City: Jacksonville
State: Florida
Focus: Build
Status: Amateur
laughing6-hehe

Frisket film? That even sounds fun.

What is it?

_________________
There is no difference between the man that thinks he can....and the man that thinks he cannot.


Top
 Profile  
 
PostPosted: Mon Mar 16, 2009 8:13 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Sep 09, 2005 7:51 am
Posts: 3786
Location: Canada
I use the air powered mini die grinder/inlay tool that John Hall sells (got mine from the other guy though) with a 1/8 inch bit ... tape the top and cut the bridge location, then its easy to set the depth, and then as an added bonus, I simply put two pieces of tape on the router base and route a lip on the bridge edge. So simple my students arent even scared to use it.

_________________
Tony Karol
www.karol-guitars.com
"let my passion .. fulfill yours"


Top
 Profile  
 
PostPosted: Mon Mar 16, 2009 8:37 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Jan 04, 2005 10:03 am
Posts: 6680
Location: Abbotsford, BC Canada
TonyKarol wrote:
I use the air powered mini die grinder/inlay tool that John Hall sells (got mine from the other guy though) with a 1/8 inch bit ... tape the top and cut the bridge location, then its easy to set the depth, and then as an added bonus, I simply put two pieces of tape on the router base and route a lip on the bridge edge. So simple my students arent even scared to use it.


Mind doing a little show and tell for us Capitan K?

_________________
My Facebook Guitar Page

"There's really no wrong way, as long as the results are what's desired." Charles Fox

"We have to constantly remind ourselves what we're doing....No Luthier is putting a man on the moon!" Harry Fleishman

"Generosity is always different in the eye of the person who didn't receive anything, but who wanted some." Waddy Thomson


Top
 Profile  
 
PostPosted: Mon Mar 16, 2009 9:26 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue May 13, 2008 10:44 am
Posts: 6262
Location: Virginia
I tape it. I make the tape foot print slightly smaller then the bridge. Polish out the guitar, remove the tape and scribe the bridge and use a nice sharp curved 'glue' chisel to remove the the edge. I found that making the tape footprint the same size causes a slight build up of finish right on the edge of the tape. So having it a bit smaller allows me to scribe a nice sharp edge and fit without having to scrape the whole area and it's easier to get a chisel under the finish when you start on bare wood.


Top
 Profile  
 
PostPosted: Mon Mar 16, 2009 10:44 am 
Offline
Contributing Member
Contributing Member

Joined: Wed Feb 02, 2005 3:14 am
Posts: 2590
Location: United States
Steve Saville wrote:
Why not do the Rick Turner method? Superglue the bridge right to the finish. It works with cat urethane - no idea about anything else.


Rick does that? I was just talking to Tony Ferguson about that Saturday...I thought I saw a youtube video where a chinese factory was doing the same thing...

_________________
http://www.presnallguitars.com


Top
 Profile  
 
PostPosted: Mon Mar 16, 2009 11:26 am 
Offline
Koa
Koa
User avatar

Joined: Tue Apr 01, 2008 8:51 am
Posts: 1310
Location: Michigan,U.S.A.
Focus: Build
Status: Professional
Does anyone glue it on before the finish? That way you know your glueing to a proper surface.If you router afterwards, you loose the radius on the glue surface between the top and bridge correct?And if you scrape, you don't get a true surface either.So if you glue it before finish and then mask off the bridge to finish wouldn't that be a better joint?


Top
 Profile  
 
PostPosted: Mon Mar 16, 2009 11:39 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Nov 11, 2005 3:32 am
Posts: 2687
Location: Ithaca, New York, United States
Chris aka Sniggly wrote:
laughing6-hehe

Frisket film? That even sounds fun.

What is it?


www.dickblick.com

Search for frisket film. It's a very thin, low tack masking material that's used in lots of art applications. It comes in sheets and wide rolls, and it is highly recommended for the purpose of masking the bridge footprint by several builders/finishers whose opinion I trust.

_________________
Todd Rose
Ithaca, NY

https://www.dreamingrosesecobnb.com/todds-art-music

https://www.facebook.com/ToddRoseGuitars/


Top
 Profile  
 
PostPosted: Mon Mar 16, 2009 11:45 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jan 03, 2005 7:40 am
Posts: 2694
Location: United States
First name: John
Last Name: How
City: Auburn
State: Ca
Country: USA
Mark Groza wrote:
Does anyone glue it on before the finish? That way you know your glueing to a proper surface.If you router afterwards, you loose the radius on the glue surface between the top and bridge correct?And if you scrape, you don't get a true surface either.So if you glue it before finish and then mask off the bridge to finish wouldn't that be a better joint?


Your using the top as a guide for routing off the finish so why would you lose the radius. It is so simple, I don't see why more people don't use this method.
Put down a couple layers of 2" wide tape covering the entire area of the bridge. Locate, pin and scribe around the bridge. Set your dremmel or small router with a 1/8" bit to just cut thru the finish and route it off. Just be sure to stay inside the line and then clean up the edge with a small chisel. It takes just a few minutes and the surface is clean as new wood

_________________
Tickle your guitar daily, and it'll tickle you back.


Top
 Profile  
 
PostPosted: Mon Mar 16, 2009 12:01 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Nov 11, 2005 3:32 am
Posts: 2687
Location: Ithaca, New York, United States
John How wrote:
Put down a couple layers of 2" wide tape covering the entire area of the bridge. Locate, pin and scribe around the bridge.


Just be careful to cut ONLY through the tape (and the finish, if you want) and not into the wood at all.

_________________
Todd Rose
Ithaca, NY

https://www.dreamingrosesecobnb.com/todds-art-music

https://www.facebook.com/ToddRoseGuitars/


Top
 Profile  
 
PostPosted: Mon Mar 16, 2009 12:22 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Mar 24, 2006 12:42 pm
Posts: 2360
Location: Windsor Ontario Canada
First name: Fred
Last Name: Tellier
City: Windsor
State: Ontario
Zip/Postal Code: N8T2C6
Country: Canada
Focus: Build
Status: Amateur
My 1st 2 builds I removed the finish with a extremely sharp chisel after cutting around the bridge with a exact knife, this was not that hard to do but hard on the nerves so the next 2 were masked. The next which I will start finishing in a couple more weeks will also be masked, I never thought of frisket masking film and will try it. I used it for years in my other hobby and never even thought about it for guitar work.

Fred

_________________
Fred Tellier
http://www.fetellierguitars.com
Facebook page http://www.facebook.com/pages/FE-Tellier-Guitars/163451547003866


Top
 Profile  
 
PostPosted: Mon Mar 16, 2009 5:08 pm 
Offline
Walnut
Walnut

Joined: Mon Aug 28, 2006 9:35 am
Posts: 28
How about on French Polish finishes? Is it easier or harder to get clean mating surfaces on a classical with FP finish than other types of finishes? Something I have been wondering about for awhile. My first (a steel string Martin style kit from Blues Creek) is on hold for a bit, but I will probably French polish that one as well since I don't have facilities for spraying. Thanks for this thread... man I love this forum!


Top
 Profile  
 
PostPosted: Mon Mar 16, 2009 5:15 pm 
Offline
Contributing Member
Contributing Member

Joined: Mon Jan 03, 2005 7:46 am
Posts: 1315
Location: Branson, MO
First name: stan
Last Name: thomison
City: branson
State: mo
Zip/Postal Code: 65616
Country: united states
Focus: Build
Status: Professional
Used to scrape or route. Now tape off both the bridge and fb extention.


Top
 Profile  
 
PostPosted: Mon Mar 16, 2009 5:22 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Feb 01, 2008 8:47 am
Posts: 1244
Location: Montreal, Canada
Focus: Build
Status: Amateur
I scrape, but I'll eventually try the routing method.

_________________
Alain Moisan
Former full time builder of Acoustics, Classicals and Flamencos.
(Now building just for fun!)


Top
 Profile  
 
PostPosted: Mon Mar 16, 2009 5:23 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Jan 06, 2005 7:29 am
Posts: 3840
Location: England
Mark Groza wrote:
Does anyone glue it on before the finish? That way you know your glueing to a proper surface.If you router afterwards, you loose the radius on the glue surface between the top and bridge correct?And if you scrape, you don't get a true surface either.So if you glue it before finish and then mask off the bridge to finish wouldn't that be a better joint?


It's not unusual in the classical building world to glue the bridge on when the guitar is in the white so that final tuning of the top can be done with strings on and the response adjusted for a couple of weeks before finishing. French polishing around the bridge takes some practise but is fairly simple, and adds little to the difficulty.

I also do this with steel strings as well I like to string my guitars up in the white for final tuning of the top and as I don't glue my fingerboard to the top it is simple to take the neck off again for finishing.

Oh with my lutes I glue the bridge on to the top before I glue the top to the body!

Colin

_________________
I don't believe in anything, I simply make use of a set of reasonable working hypotheses.


Top
 Profile  
 
PostPosted: Mon Mar 16, 2009 6:01 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Tue Jan 25, 2005 6:16 am
Posts: 2692
I taped, but the problem was sanding and rubbing a flat surface ar the bridge perimeter. I scraped, but it was tedious. Last couple I've shaved the finish off with a long, sharp paring chisel (after scoring the perimeter). It's actually fun, like most fine paring.

_________________
Howard Klepper
http://www.klepperguitars.com

When all else fails, clean the shop.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 31 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 11 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com