***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Tue Jul 22, 2025 2:43 pm


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 1 of 2
  [ 27 posts ]  Go to page 1, 2  Next
  Print view Previous topic | Next topic 
Author Message
Andy Birko
PostPosted: Wed Mar 11, 2009 7:24 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Jun 12, 2008 6:59 am
Posts: 1964
Location: Rochester Michigan
I wear something I got from Rockler for free when I purchased some power tool or something. I think it's this one: http://www.rockler.com/product.cfm?page ... lter=apron

The good:

Upper pocket is nice for holding a sharpie, two pencils (white and black) an exacto with a cover, and a 6" ruler. It's also got a cross back with a little clip thingy to make it easy to get in and out of.

The bad:

The lower pockets are ultra effective dust collectors and pretty much nothing else. The top pocket is pretty good at this but not to the same degree as the lower ones.

Now that I've written this, perhaps I'll go and remove the dust collection feature.

Best thing was it was free.

_________________
http://www.birkonium.com CNC Products for Luthiers
http://banduramaker.blogspot.com
Top
 Profile  
 
Brock Poling
PostPosted: Wed Mar 11, 2009 8:05 pm 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2004 1:20 pm
Posts: 5915
Location: United States
I use the ones from Woodcraft and just wipe glue on them as I am doing glue ups. Wipe it off tools, my hands whatever.

After they too nasty and crusty I just throw them away and get another.

I find it works great when time is your enemy and you want to keep glue off your harvest moon concert t. ;-)

_________________
Brock Poling
Columbus, Ohio
http://www.polingguitars.com
Top
 Profile  
 
Rich Schnee
PostPosted: Wed Mar 11, 2009 8:41 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Mon Jan 28, 2008 6:13 pm
Posts: 228
Location: Newtown, CT
20 years ago I bought a leather apron similar to this one.
http://www.woodworker.com/cgi-bin/FULLP ... ron&smode=
I like the simplicity of it; it slips over your head, nothing to tie. Just two pockets.
I really don’t like walking around like a tool box.

_________________
Rich S

"The inconvenience of poor quality will linger long after the thrill of a bargain has been forgotten"
Top
 Profile  
 
Stephen Boone
PostPosted: Wed Mar 11, 2009 9:08 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Jan 01, 2009 9:43 am
Posts: 601
Location: Bozeman, Montana
Focus: Build
I do not care for an apron that hangs from the back of the neck. I like the ones that ride on the shoulders and cross over in the back. Much less fatigue that way.

_________________
http://www.booneguitars.com
https://www.facebook.com/pages/Stephen-Boone-guitar-builder/488208541257210
Top
 Profile  
 
Jason
PostPosted: Wed Mar 11, 2009 9:12 pm 
Offline
Koa
Koa
User avatar

Joined: Fri Jan 07, 2005 6:07 pm
Posts: 574
Location: Canada
State: BC
Country: Canada
I also don't like carrying a bunch of tools on me, things always fall out of my pockets and I end up losing them. I've got a leather apron I wear occasionally, though at the moment I cant remember what for..

I deal with a little more sawdust than most of you but I think the best way to go is coveralls. In the summer lightweight coveralls/carharts are great, in the winter I've got insulated ones or just my viking rain pants. At lunch or the end of the day you can blow off real quick with a compressor, take off that outer layer and your cleaned up and ready to go in 30 seconds.. You can wear as much or as little as you want under them so changing with the weather is no problem.

Coveralls are cheap, comfy and washable, can't go wrong ;)

_________________
CVT Inc.
A tour of our shop (Somewhat outdated)
My Personal eBay profile. BCWoodBug
Top
 Profile  
 
Rich Schnee
PostPosted: Wed Mar 11, 2009 9:52 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Mon Jan 28, 2008 6:13 pm
Posts: 228
Location: Newtown, CT
Stephen Boone wrote:
I do not care for an apron that hangs from the back of the neck. I like the ones that ride on the shoulders and cross over in the back. Much less fatigue that way.

Stephen …If you’re referring to the apron I use, It doesn't hang around the neck. The weight is on the shoulders. I wish you could see how straps cross on the back. It's as comfortable as wearing a shirt.

_________________
Rich S

"The inconvenience of poor quality will linger long after the thrill of a bargain has been forgotten"
Top
 Profile  
 
Jason
PostPosted: Wed Mar 11, 2009 10:08 pm 
Offline
Koa
Koa
User avatar

Joined: Fri Jan 07, 2005 6:07 pm
Posts: 574
Location: Canada
State: BC
Country: Canada
Filippo Morelli wrote:
IMHO, hands down Lee Valley has this nailed:

http://www.leevalley.com/wood/page.aspx?c=2&p=57647&cat=1,43413,45989&ap=1

Goes on easy, good coverage, heavy fabric but flexible in the right way. I wear it all day.

I love it.

Filippo

Attachment:
67k1006s1.jpg

Attachment:
67k1006s3.jpg


Oh ... did I mention it is all of $30? Why spend $85 to $140 for a leather apron for luthiery? I've run mine through the wash once thus far ... probably about the best $30 I spent in the shop.


Ok I like this apron.. I might have to try it. Lee Valley always has such good stuff.

_________________
CVT Inc.
A tour of our shop (Somewhat outdated)
My Personal eBay profile. BCWoodBug
Top
 Profile  
 
Mike OMelia
PostPosted: Wed Mar 11, 2009 11:20 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Feb 20, 2008 9:12 pm
Posts: 6994
First name: Mike
Last Name: O'Melia
City: Huntsville
State: Alabama
Focus: Build
Status: Semi-pro
I like this one (not being helpful am I, but seriously, I want a GOOD apron)


You do not have the required permissions to view the files attached to this post.

Top
 Profile  
 
Chris Paulick
PostPosted: Wed Mar 11, 2009 11:44 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Sat Jun 21, 2008 10:58 am
Posts: 2774
Location: Tampa, Florida USA
And it's the best for working with epoxy and spraying lacquer.
Top
 Profile  
 
Frei
PostPosted: Thu Mar 12, 2009 12:00 am 
Offline
Koa
Koa
User avatar

Joined: Wed Jan 30, 2008 11:16 pm
Posts: 718
12.00 Welders Leather apron from ebay...
On a similar note:
I am also building a plexiglass/wood safety shield for the drill press (paranoid at any 3000 rpm spinning object 1.5 foot in front of my face). I want it to clamp to the table or be free standing.

_________________
Here is what a Parlor Guitar is for!
http://www.youtube.com/watch?v=oEa8PkjO6_I
Top
 Profile  
 
Mike OMelia
PostPosted: Thu Mar 12, 2009 12:00 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Feb 20, 2008 9:12 pm
Posts: 6994
First name: Mike
Last Name: O'Melia
City: Huntsville
State: Alabama
Focus: Build
Status: Semi-pro
Just make sure the fan in the suit is explosion proof!
Top
 Profile  
 
Greg
PostPosted: Thu Mar 12, 2009 1:21 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Tue Nov 21, 2006 4:55 pm
Posts: 376
Location: Canada
First name: Greg
Last Name: Harrington
Focus: Build
Status: Semi-pro
have been experimenting with some new shop apron ideas


You do not have the required permissions to view the files attached to this post.

_________________
Greg
http://garibaldiinstruments.com/
Top
 Profile  
 
Mike OMelia
PostPosted: Thu Mar 12, 2009 2:08 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Feb 20, 2008 9:12 pm
Posts: 6994
First name: Mike
Last Name: O'Melia
City: Huntsville
State: Alabama
Focus: Build
Status: Semi-pro
Greg wrote:
have been experimenting with some new shop apron ideas


LOL! Snort Snort LOL! laughing6-hehe
Top
 Profile  
 
Marc
PostPosted: Thu Mar 12, 2009 7:40 am 
Offline
Koa
Koa

Joined: Tue Mar 07, 2006 12:10 am
Posts: 606
Location: United States
Todd, The moonshineleather aprons are excellent, I wear the A01-SCP cross back.
Top
 Profile  
 
Peter J
PostPosted: Thu Mar 12, 2009 7:49 am 
Offline
Koa
Koa
User avatar

Joined: Wed Dec 07, 2005 9:08 am
Posts: 535
First name: Pete
Last Name: Liccardello
City: Eden Prairie
State: Minnesota
Todd, I have a number of cloth aprons and even popped for the fancy leather one from Rockler a few years ago but can honestly say that I've found a good old lightweight shop coat to be most effective.

If you are doing any serious woodwork at the saw, sander, router or drill press there is always some sawdust floating around no matter how efficient your dust removal system. Wearing a shop coat lets me just hang it at the door to the shop as I go in and out and allows me to keep my shirts and sleeves, shoulders and collar much cleaner without the entrapped sawdust that usually accumulates there.

They are comfortable, cheap and can be had on Ebay for less than $10 and I now keep a few of them around. Even the white lab coats are great and you can play doctor when you're not in the shop.. :D

_________________
Peter
Top
 Profile  
 
douglas ingram
PostPosted: Thu Mar 12, 2009 9:04 am 
Offline
Koa
Koa
User avatar

Joined: Wed Sep 26, 2007 12:55 am
Posts: 1505
Location: Lorette, Manitoba, Canada
First name: Douglas
Last Name: Ingram
City: Lorette
State: Manitoba
Country: Canada
Focus: Build
I used to try wearing shop aprons, but I generally ended up not wearing it. Aprons are to protect your good cloths while you work. If you're settling into a longer session of work, you wear work cloths.

I used to just wear old clothes, but moving around a lot, bending, crawling on the ground, etc, in jeans wasn't very comfortable. So now I wear overalls in winter, and old shirts and shorts in summer. The overalls are more comfortable around the beltline as they are not pinching in, and they keep your back warmer because there is never any gap between the beltline and your shirt.

I don't really need coveralls, that's like getting dressed twice.

_________________
Expectation is the source of all misery; comparison the thief of joy.
http://redrivercanoe.ca/
Top
 Profile  
 
SteveSmith
PostPosted: Thu Mar 12, 2009 12:18 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7472
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
Todd Stock wrote:
Not a hot topic here on the OLF, but one of those things that everyone finds themselves wishing they had after CA gets all over an original, twice-worn Nell Young 'Harvest' tour t-shirt.

- The lightweight cloth ones with minimal pockets from SM, Taylor, etc. are nice...throw them in the wash to spruce up a bit. Not much protection, but easy to wear inside-out to keep the glue buggies away from finish.

- Woodworking aprons with 40 pockets are not my favorites, as I'm always worrying about a finish ding should tool depart pocket.

- The Lie-Nielsen apron is really nice - inside pocket and no metal with any chance of scratching a guitar. Very sporty.

- One company I have not tried, but looks great is Moonshine Leather...lots of variety in offerings

So...any favorites or ones particularly well suited to luthiery?

https://www.moonshineleather.com/leathe ... adv=wood01


I've never had an apron in the shop. I did used to wear insulated coveralls before I got a place with some heating in it. However I must say the the folks at moonshineleather (thanks Todd) have some cool stuff as the trip to the site just cost me some money. I'm seriously considering one of their plain leather aprons since I always seem to be brushing sawdust off of my front or messing up pants and shirts by leaning over something with glue on it or something.

_________________
Steve Smith
"Music is what feelings sound like"
Top
 Profile  
 
JimWomack
PostPosted: Thu Mar 12, 2009 12:36 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun May 13, 2007 10:28 pm
Posts: 404
Location: Clermont, FL
Focus: Build
I don't know guys I kinda like Hesh's apron ...
Image

Betcha you thought we'd all forgotten, Hesh! wow7-eyes

_________________
Jim Womack

"Be thankful we're not getting all the government we're paying for. "
Will Rogers
Top
 Profile  
 
SteveSmith
PostPosted: Thu Mar 12, 2009 1:10 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7472
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
laughing6-hehe

_________________
Steve Smith
"Music is what feelings sound like"
Top
 Profile  
 
Stephen Boone
PostPosted: Thu Mar 12, 2009 1:22 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Jan 01, 2009 9:43 am
Posts: 601
Location: Bozeman, Montana
Focus: Build
Quote:
Stephen …If you’re referring to the apron I use, It doesn't hang around the neck. The weight is on the shoulders. I wish you could see how straps cross on the back. It's as comfortable as wearing a shirt.

Stephen Boone wrote:
I do not care for an apron that hangs from the back of the neck. I like the ones that ride on the shoulders and cross over in the back. Much less fatigue that way.




Not at all Rich! Mine was just a general statement about comfort.

I currently have a Rockler apron which I like because it is pretty large and I am a large person. It has the sawdust capturing pockets but that does not bother me.

My apron contains a note pad, pencil, 6" stainless scale, japanese folding knife, small push stick I use with the bandsaw, 4" adjustable square, 10' tape measure, Pink Pearl eraser (rather worn), and remotes for the stereo and dust collector. I cannot function without these items at hand. This also leaves plenty of room to add various job specific items temporarily as needed.

I am worried about Hesh.

_________________
http://www.booneguitars.com
https://www.facebook.com/pages/Stephen-Boone-guitar-builder/488208541257210
Top
 Profile  
 
Randolph
PostPosted: Thu Mar 12, 2009 4:47 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Jul 23, 2008 1:34 pm
Posts: 639
Location: Santa Cruz, CA
First name: Randolph
Last Name: Morris
Focus: Build
Status: Amateur
I use a Highland Hardware canvas type (probably same as Rockler) It has the sawdust collecting pockets but I find a quick swipe or two once every two weeks or so cleans them out enough. I can't seem to think without wearing the thing. It has everything I need to handle most anything and when time is of the essence I'm not running in circles looking for something.
I wipe glue on the front of it constantly. After a few months it starts looking pretty gluey and I start tearing off big chunks at a time. I wouldn't like anything nicer - I would just wreck it. I don't mind spending the $30 every couple of years. It's the most useful tool I have in the shop.
Top
 Profile  
 
Colin S
PostPosted: Thu Mar 12, 2009 5:58 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Jan 06, 2005 7:29 am
Posts: 3840
Location: England
Lab coat.

Colin

_________________
I don't believe in anything, I simply make use of a set of reasonable working hypotheses.
Top
 Profile  
 
Pat Foster
PostPosted: Thu Mar 12, 2009 11:08 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat May 17, 2008 1:11 pm
Posts: 2390
Location: Spokane, Washington
First name: Pat
Last Name: Foster
Country: USA
Focus: Build
I got this one from Grizzly as a gift. I don't like carrying much weight so I just keep pencils, knife and 6" scale in it. I use the big pockets to collect sawdust.

Attachment:
h2922.jpg


Pat


You do not have the required permissions to view the files attached to this post.

_________________
formerly known around here as burbank
_________________

http://www.patfosterguitars.com
Top
 Profile  
 
Mike OMelia
PostPosted: Thu Mar 12, 2009 11:14 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Feb 20, 2008 9:12 pm
Posts: 6994
First name: Mike
Last Name: O'Melia
City: Huntsville
State: Alabama
Focus: Build
Status: Semi-pro
laughing6-hehe I just laughed so hard I almost threw up in my mouth. I was just about to mention Hesh's penchant for luthierie in the tighty whities.

Good one.

Mike (who realizes this is a serious apron forum and will now move on)


JimWomack wrote:
I don't know guys I kinda like Hesh's apron ...
Image

Betcha you thought we'd all forgotten, Hesh! wow7-eyes
Top
 Profile  
 
Chris Paulick
PostPosted: Fri Mar 13, 2009 4:31 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Sat Jun 21, 2008 10:58 am
Posts: 2774
Location: Tampa, Florida USA
A little tip. I just got Shop Notes and for those who don't like the shoe string ties on aprons you can use use tool belt suspenders and cut the shoe strings off.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 2
  [ 27 posts ]  Go to page 1, 2  Next

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: A.Hix, Bing [Bot], zmp2 and 29 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com