***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Mon Jul 21, 2025 1:13 pm


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 2 of 2
  [ 35 posts ]  Go to page Previous  1, 2
  Print view Previous topic | Next topic 
Author Message
Marc Lupien
 Post subject: Re: My Logo ...thoughts?
PostPosted: Wed Feb 18, 2009 11:05 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Wed May 16, 2007 12:39 am
Posts: 170
Location: Montreal, Quebec, Canada
Hi Mike,

My comments are more on the process than the logo itself.
On my first "batch" of guitars, I went with a metal "plaque" that was etched with my logo. The goal was to fill the logo with colored epoxy, sand everything then laquer.
It took a LOT of time to fill the small details with the epoxy... multiple coats were required since small bubbles keep showing up!!!
Then again, maybe it was the metal part that caused the problems... but I will NOT try it with wood... ;-)

My 2 cents...

Marc
Top
 Profile  
 
Mike OMelia
 Post subject: Re: My Logo ...thoughts?
PostPosted: Wed Feb 18, 2009 11:09 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Feb 20, 2008 9:12 pm
Posts: 6994
First name: Mike
Last Name: O'Melia
City: Huntsville
State: Alabama
Focus: Build
Status: Semi-pro
I have not decided on fill. There are a lot of options out there.

Marc Lupien wrote:
Hi Mike,

My comments are more on the process than the logo itself.
On my first "batch" of guitars, I went with a metal "plaque" that was etched with my logo. The goal was to fill the logo with colored epoxy, sand everything then laquer.
It took a LOT of time to fill the small details with the epoxy... multiple coats were required since small bubbles keep showing up!!!
Then again, maybe it was the metal part that caused the problems... but I will NOT try it with wood... ;-)

My 2 cents...

Marc
Top
 Profile  
 
SteveSmith
 Post subject: Re: My Logo ...thoughts?
PostPosted: Wed Feb 18, 2009 11:49 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7472
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
Mike O'Melia wrote:
Here are some updates. I am not considering the big ones.


I like #3 and #5.

_________________
Steve Smith
"Music is what feelings sound like"
Top
 Profile  
 
oli-lgw
 Post subject: Re: My Logo ...thoughts?
PostPosted: Wed Feb 18, 2009 11:49 am 
Offline
Mahogany
Mahogany
User avatar

Joined: Fri Nov 23, 2007 10:58 am
Posts: 89
Location: Canada
First name: Olivier
Last Name: Gauthier
City: Montreal
State: Quebec
Country: Canada
Focus: Build
Status: Amateur
my thoughts:
#5 on the peghead
#3 on the 12th fret (or elsewhere ;) , but maybe without the lettering? so it won't be repeated on the guitar... idunno )
#2 as the label (I take it the dashed line is for the serial number or model?)


but I think I'm just repeating myself.... gaah
it's nice, I really like it [clap] [:Y:]

pizza

_________________
Olivier Gauthier
Montreal, QC
Top
 Profile  
 
SteveSmith
 Post subject: Re: My Logo ...thoughts?
PostPosted: Wed Feb 18, 2009 11:50 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7472
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
SteveSmith wrote:
Mike O'Melia wrote:
Here are some updates. I am not considering the big ones.


I like #3 for a label, I think the one-handed carry just looks better and #5 for the headstock, nice and clean.

_________________
Steve Smith
"Music is what feelings sound like"
Top
 Profile  
 
Mike OMelia
 Post subject: Re: My Logo ...thoughts?
PostPosted: Fri Feb 20, 2009 10:04 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Feb 20, 2008 9:12 pm
Posts: 6994
First name: Mike
Last Name: O'Melia
City: Huntsville
State: Alabama
Focus: Build
Status: Semi-pro
SteveSmith wrote:
SteveSmith wrote:
Mike O'Melia wrote:
Here are some updates. I am not considering the big ones.


I like #3 for a label, I think the one-handed carry just looks better and #5 for the headstock, nice and clean.


Me too!
Top
 Profile  
 
Mike OMelia
 Post subject: Re: My Logo ...thoughts?
PostPosted: Fri Feb 20, 2009 10:07 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Feb 20, 2008 9:12 pm
Posts: 6994
First name: Mike
Last Name: O'Melia
City: Huntsville
State: Alabama
Focus: Build
Status: Semi-pro
Marc Lupien wrote:
Hi Mike,

My comments are more on the process than the logo itself.
On my first "batch" of guitars, I went with a metal "plaque" that was etched with my logo. The goal was to fill the logo with colored epoxy, sand everything then laquer.
It took a LOT of time to fill the small details with the epoxy... multiple coats were required since small bubbles keep showing up!!!
Then again, maybe it was the metal part that caused the problems... but I will NOT try it with wood... ;-)

My 2 cents...

Marc



I have had a series of test pieces made with wood. I will try the expoxy fill and let you know about the experience. I will post pics. First, gotta find some colored expoxy. Was also thinking of adding powdered stone.

Mike
Top
 Profile  
 
SteveSmith
 Post subject: Re: My Logo ...thoughts?
PostPosted: Fri Feb 20, 2009 12:29 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7472
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
I've used the metal acid dyes to color clear epoxy - works good. You only need a drop or two of dye for an oz or two of the epoxy. As always, test on scrap.

_________________
Steve Smith
"Music is what feelings sound like"
Top
 Profile  
 
oli-lgw
 Post subject: Re: My Logo ...thoughts?
PostPosted: Fri Feb 20, 2009 7:13 pm 
Offline
Mahogany
Mahogany
User avatar

Joined: Fri Nov 23, 2007 10:58 am
Posts: 89
Location: Canada
First name: Olivier
Last Name: Gauthier
City: Montreal
State: Quebec
Country: Canada
Focus: Build
Status: Amateur
Mike O'Melia wrote:
Was also thinking of adding powdered stone.


I've heard about some stones, I'd have to check back to see wich ones exactly, that glow fluorescent with a blacklight... pretty useless and very '80s, but it could add something... I was actually thinking about trying it either on fretmarkers or somewhere else, some day. Anyway, let me know if it's something you'd like to know ;)

pizza

_________________
Olivier Gauthier
Montreal, QC
Top
 Profile  
 
Mike OMelia
 Post subject: Re: My Logo ...thoughts?
PostPosted: Fri Feb 20, 2009 11:46 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Feb 20, 2008 9:12 pm
Posts: 6994
First name: Mike
Last Name: O'Melia
City: Huntsville
State: Alabama
Focus: Build
Status: Semi-pro
oli-lgw wrote:
Mike O'Melia wrote:
Was also thinking of adding powdered stone.


I've heard about some stones, I'd have to check back to see wich ones exactly, that glow fluorescent with a blacklight... pretty useless and very '80s, but it could add something... I was actually thinking about trying it either on fretmarkers or somewhere else, some day. Anyway, let me know if it's something you'd like to know ;)

pizza


Sure, tell me what you know! Tnx, Mike
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 2 of 2
  [ 35 posts ]  Go to page Previous  1, 2

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: jfrench, meddlingfool, Michaeldc and 27 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com