Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Wed Jul 23, 2025 6:22 pm


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 19 posts ] 
Author Message
 Post subject: Fretting by Hammer
PostPosted: Sat Jan 10, 2009 5:50 pm 
Offline
Koa
Koa

Joined: Sat Apr 12, 2008 5:57 pm
Posts: 636
Location: Nr London, UK
Hi I've read loads on fretting, and everyone seems to have a different method so I'm aiming to form a concensous from the majority

1. What hammer to you use?
and
2. How do you hammer them in?

As I've read everyone over arches the fret, then using the hammer:

1. Work from one side to the other
2. Start in the middle then work to the edges
3. Start by knocking the edges down, then work from the middle out

Then most agree to then knocking the edges again, but on the overhang

Then some say lubricate the slot with a 50%-50% water and rubbing alcohol, other use water and pva glue and some do it straight

HOW DO YOU DO YOUR?

_________________
Formerly JJH

I learn more from my mistakes than my successes


Top
 Profile  
 
 Post subject: Re: Fretting by Hammer
PostPosted: Sat Jan 10, 2009 6:11 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Mon Jan 28, 2008 5:21 am
Posts: 4915
Location: Central PA
First name: john
Last Name: hall
City: Hegins
State: pa
Zip/Postal Code: 17938
Country: usa
Focus: Build
Status: Professional
I learned hammer fretting at CF Martin. My hammer of choice is a cobblers chasing hammer . It is small with a larger cheek and very controllable. I use 1/2 and 1/2 water and tite bond. That is the way they do it at Martin. Then I pre cut my frets with a slight overhang. I start on 1 end and work to the other.
If the fretboard has a lot of inlay like a tree of life I use epoxy and clamp the frets so I don't break pearl. Fretting isn't that hard but it is a skill that you need to master. I think the key for fretting is the leveling and beveling once the frets are in. We all have our techniques and not all of us to it the same way.
Find a technique that works for you and that gives you a repeatable result.
john hall

_________________
John Hall
blues creek guitars
Authorized CF Martin Repair
Co President of ASIA
You Don't know what you don't know until you know it


Top
 Profile  
 
 Post subject: Re: Fretting by Hammer
PostPosted: Sat Jan 10, 2009 6:38 pm 
Offline
Koa
Koa

Joined: Mon Jul 02, 2007 1:22 pm
Posts: 766
-


Last edited by TonyFrancis on Wed Dec 04, 2013 2:12 am, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: Fretting by Hammer
PostPosted: Sat Jan 10, 2009 6:58 pm 
Offline
Koa
Koa

Joined: Sat Apr 12, 2008 5:57 pm
Posts: 636
Location: Nr London, UK
I already own a cobblers hammer I think it was in a box of panel beating stuff I was given along with some metal blocks, no panel beaters hammers which I thought strange, the closest think I can say it looks like is a claw hammer but the claw isn't split and the hammers face has a large crown like a pocket watch. I was going to buy a plastic one, so you've saved me money

Thanks

_________________
Formerly JJH

I learn more from my mistakes than my successes


Top
 Profile  
 
 Post subject: Re: Fretting by Hammer
PostPosted: Sat Jan 10, 2009 8:48 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sat Jan 15, 2005 12:50 pm
Posts: 3933
Location: United States
I use a regular carpenter's hammer. Sometimes I use a block of hardwood about 2" long and 3/4" square between the hammer and the fret, tapping on the end grain.

I over bend the frets slightly, start the ends, and then work my way in toward the middle, tapping alternately on each end. Currently I fret dry, and sometimes run a drop of thin super glue in beside the frets, depending on how tight the frets are in the slots and such.


Top
 Profile  
 
 Post subject: Re: Fretting by Hammer
PostPosted: Sat Jan 10, 2009 9:47 pm 
Offline
Mahogany
Mahogany

Joined: Tue Oct 14, 2008 9:38 pm
Posts: 79
Location: Peters Creek,Alaska
I over bend wire also and use Elmers white school glue. I use a hammer I got in the three dollar bin at Napa. I start at the center and tap my way outward. With all the radius on the wire I usually don't have to hit ends much.

http://fleckguitar.com/images/guitars/n ... G_0126.jpg


Top
 Profile  
 
 Post subject: Re: Fretting by Hammer
PostPosted: Sat Jan 10, 2009 10:14 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Sep 24, 2008 8:55 pm
Posts: 3820
Location: Taiwan
First name: Tai
Last Name: Fu
City: Taipei
Country: Taiwan
Focus: Repair
Status: Semi-pro
I actually bought a Stewmac fretting hammer. It has a brass and plastic end. For nickel fret I use the plastic end. Overbend the fret then I would hit the ends to seat them in them work my way center. Don't hit too hard or else you will dent the fret which is very easy with nickel wires. For stainless steel wire I use the brass end. Stainless steel is in my experience more forgiving as far as dents goes, they don't bend as easily so you'd have it hit it really hard to dent it. I run a line of thick CA into the slots to stabilize the fret and prevent it from coming back out like how Warmoth did it. I think I will press the frets next time for a more consistent fret installation since when you level the frets with hammering you had to remove a bit of material to level the fret.

You might want to practice on a scrap fretboard first if you intend to refret a guitar.

_________________
Cat-gut strings are made from kitten guts, stretched out to near breaking point and then hardened with grue saliva. As a result these give a feeling of Pain and anguish whenever played, and often end up playing themselves backwards as part of satanic rituals.

Typhoon Guitars
http://www.typhoon-guitars.com


Top
 Profile  
 
 Post subject: Re: Fretting by Hammer
PostPosted: Sun Jan 11, 2009 12:46 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Jun 24, 2007 1:14 am
Posts: 246
Location: United States
City: Keene
State: NH
www.japanwoodworker.com/product.asp?s=J ... t_id=12910

this is what you want...


Top
 Profile  
 
 Post subject: Re: Fretting by Hammer
PostPosted: Sun Jan 11, 2009 2:04 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Tue May 02, 2006 9:02 am
Posts: 2351
Location: Canada
First name: Bob
Last Name: Garrish
City: Toronto
State: Ontario
Country: Canada
Status: Professional
Claw hammer, hold it halfway to the head, gentle taps (think of the head 'pressing' in the fret with momentum more than 'tapping' it in). Ends first and then work center-out. I can't stand the light brass/plastic 'fret hammers'. I feel there's less control in the process as you really do need to 'hammer' them in with those (the heads aren't heavy enough).

_________________
Bob Garrish
Former Canonized Purveyor of Fine CNC Luthier Services


Top
 Profile  
 
 Post subject: Re: Fretting by Hammer
PostPosted: Sun Jan 11, 2009 2:14 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Nov 11, 2005 3:32 am
Posts: 2687
Location: Ithaca, New York, United States
I use a small dead blow hammer with interchangeable faces. Learned that from Sergei de Jonge, and it works laughably well. It makes installing frets an ecstatic experience. So easy I could do it in my sleep, with both hands tied behind my back. Seriously, I highly recommend trying this type of hammer. It's a very handy tool for other purposes as well. I got mine here:

http://hammersource.com/Dead_Blow_Hammers.html

It's the second type down on that page - "Cast Aluminum with Replaceable Tip". Mine is the 1 lb., 1 1/4" face diameter. I use the hard nylon (white) face for fretting.

The frets are slightly over-radiused, and I tap the ends in first, then work toward the center. I'm still experimenting with different glues and gluing techniques.

_________________
Todd Rose
Ithaca, NY

https://www.dreamingrosesecobnb.com/todds-art-music

https://www.facebook.com/ToddRoseGuitars/


Top
 Profile  
 
 Post subject: Re: Fretting by Hammer
PostPosted: Sun Jan 11, 2009 3:39 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Tue Jan 25, 2005 6:16 am
Posts: 2692
Both ends toward the middle, and then gently back from the middle to the ends in case any spot isn't fully seated. Titebond or Elmers in the last quarter inch or so at the ends.

Hammer is an auto body planishing hammer I was given by a mechanic 35 years ago when he broke one end off it (it had two sides originally). I've tried others, but keep coming back to it.

_________________
Howard Klepper
http://www.klepperguitars.com

When all else fails, clean the shop.


Top
 Profile  
 
 Post subject: Re: Fretting by Hammer
PostPosted: Sun Jan 11, 2009 4:22 pm 
Offline
Cocobolo
Cocobolo

Joined: Sun May 20, 2007 2:47 pm
Posts: 377
Location: Canada
i use a $5 bargain bin hammer with a hard plastic face. like howard said, i tap down the ends, work toward the center, and then back to the ends again. and like bob, i think the key is to let the weight of the hammer do the work. don't swing. just lift the face of the hammer and let it fall.
be careful not to hit the overhang though. that can bend the end of the fret and even lift out some of the tang toward the center.
phil


Top
 Profile  
 
 Post subject: Re: Fretting by Hammer
PostPosted: Mon Jan 12, 2009 12:13 pm 
Offline
Cocobolo
Cocobolo

Joined: Wed Apr 09, 2008 11:13 am
Posts: 281
Location: Los Angeles
Todd Rose wrote:
I use a small dead blow hammer with interchangeable faces. Learned that from Sergei de Jonge, and it works laughably well. It makes installing frets an ecstatic experience. So easy I could do it in my sleep, with both hands tied behind my back. Seriously, I highly recommend trying this type of hammer. It's a very handy tool for other purposes as well. I got mine here:

http://hammersource.com/Dead_Blow_Hammers.html

It's the second type down on that page - "Cast Aluminum with Replaceable Tip". Mine is the 1 lb., 1 1/4" face diameter. I use the hard nylon (white) face for fretting.

The frets are slightly over-radiused, and I tap the ends in first, then work toward the center. I'm still experimenting with different glues and gluing techniques.

I 2nd the dead-blow hammer. You can whack away without worry.


Top
 Profile  
 
 Post subject: Re: Fretting by Hammer
PostPosted: Mon Jan 12, 2009 1:19 pm 
Offline
Mahogany
Mahogany

Joined: Thu Nov 16, 2006 9:21 am
Posts: 97
Location: Australia
I found what looks like a fretting hammer with two interchangeable plastic heads in the local hardware store bliss.
A pippin file to open the face of the fret slot and to help with seating.
I cut the frets with an overhang, straighten them, run a bead of titebond into the fret slot, and starting at one end i gently tap them in.
I use a regular old claw hammer and a wooden offcut in the same manner Alan mentioned to drive any stubborn frets in.
Oh and a bag of potting mix under the neck as support... [:Y:]

Claire


Top
 Profile  
 
 Post subject: Re: Fretting by Hammer
PostPosted: Mon Jan 12, 2009 1:39 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Mon Feb 21, 2005 6:16 am
Posts: 2244
Location: United States
First name: michael
Last Name: mcclain
City: pendleton
State: sc
Zip/Postal Code: 29670
Status: Professional
over the years i have used several different styles of hammer, ijncluding a chasing hammer when i first started. currently i use one if the types with the two replacable plastic faces.

i start at the ends and works toward the center with taps alternating from side to side.

the key thing is to keep the taps light so as not to distort or dent the fret nor cased rebound, both of which will lift the fret.

i use a bag of shot under the neck to provide a firm base and to dampen vibration.


Top
 Profile  
 
 Post subject: Re: Fretting by Hammer
PostPosted: Mon Jan 12, 2009 3:19 pm 
Offline
Cocobolo
Cocobolo

Joined: Wed Apr 09, 2008 11:13 am
Posts: 281
Location: Los Angeles
crazymanmichael wrote:
over the years i have used several different styles of hammer, ijncluding a chasing hammer when i first started. currently i use one if the types with the two replacable plastic faces.

i start at the ends and works toward the center with taps alternating from side to side.

the key thing is to keep the taps light so as not to distort or dent the fret nor cased rebound, both of which will lift the fret.

i use a bag of shot under the neck to provide a firm base and to dampen vibration.

This is why the deadblow hammer works so well. No denting, no rebound. I started using it because Cumpiano recommends it.


Top
 Profile  
 
 Post subject: Re: Fretting by Hammer
PostPosted: Mon Jan 12, 2009 7:13 pm 
Offline
Koa
Koa

Joined: Sat Apr 12, 2008 5:57 pm
Posts: 636
Location: Nr London, UK
I decided to wait until my next evening class to see how my tutor did it after experimenting myself.

He seriously over arched the fret then taps the ends down then moved in say 1/4" from where he'd previously hit and worked that back to the edges working both sides evenly till you reached the middle where there was a hump which you then hit down and worked to the edges.

The result is a fret which is much harder to remove than when I did my practice runs from the middle to the edge, but the fret surface has had a harder time of if, so I guess it'll add more time to the stone and set.

Oh and he used a jewellers chasing or repousee hammer he called it

Opinions please?

_________________
Formerly JJH

I learn more from my mistakes than my successes


Top
 Profile  
 
 Post subject: Re: Fretting by Hammer
PostPosted: Tue Jan 13, 2009 3:08 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue May 13, 2008 10:44 am
Posts: 6262
Location: Virginia
I use a cobblers hammer that looks very much like this:

Image

But after reading about the dead blow hammer I think I may want to try one. In principal it sounds like a great idea. I usually back up the neck with a big bag of cat litter to accomplish the same deadening effect.


Top
 Profile  
 
 Post subject: Re: Fretting by Hammer
PostPosted: Tue Jan 13, 2009 3:52 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri Feb 29, 2008 2:41 pm
Posts: 312
My Dad's jeweler's hammer, which I inherited in 1971:

Image
<P>
Image

_________________
https://soundcloud.com/jeffreylsuits/he ... -runnin-13


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 19 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: Chris Ide, meddlingfool and 32 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com