***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sun Jul 20, 2025 4:09 am


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 1 of 1
  [ 7 posts ] 
  Print view Previous topic | Next topic 
Author Message
Lavrov Guitars
 Post subject: micro sunburst
PostPosted: Wed Mar 28, 2012 11:01 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jun 17, 2011 8:35 pm
Posts: 363
First name: Maks
Last Name: Lavrov
Focus: Build
Status: Amateur
Hey fellas, I'm thinking of doing a sunburst on my next build and was wondering how to make that super fine burst. Just barely around the edge of the soundboard.

Thanks in advance!
Top
 Profile  
 
B. Howard
 Post subject: Re: micro sunburst
PostPosted: Wed Mar 28, 2012 4:33 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2010 9:06 pm
Posts: 2739
Location: Magnolia DE
First name: Brian
Last Name: Howard
City: Magnolia
State: Delaware
Zip/Postal Code: 19962
Country: United States
Focus: Repair
Status: Professional
I would use an airbrush.

_________________
Brian

You never know what you are capable of until you actually try.

https://www.howardguitarsdelaware.com/
Top
 Profile  
 
Mattia Valente
 Post subject: Re: micro sunburst
PostPosted: Wed Mar 28, 2012 4:48 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Jan 05, 2005 6:25 pm
Posts: 2749
Location: Netherlands
Airbrush, spray with the guitar flat on its back rather than hanging, and practice on scrap first.
Top
 Profile  
 
woody b
 Post subject: Re: micro sunburst
PostPosted: Wed Mar 28, 2012 5:03 pm 
Offline
Koa
Koa
User avatar

Joined: Sat Mar 07, 2009 7:56 am
Posts: 1825
Location: Grover NC
First name: Woodrow
Last Name: Brackett
City: Grover
State: NC
Zip/Postal Code: 28073
Country: USA
Focus: Build
I spray bursts upside down, with the top for the guitar facing the floor. This keeps overspray off the guitar.

_________________
I didn't mean to say it, but I meant what I said.
http://www.brackettinstruments.com/
Top
 Profile  
 
cphanna
 Post subject: Re: micro sunburst
PostPosted: Wed Mar 28, 2012 6:30 pm 
Offline
Koa
Koa

Joined: Sat Apr 19, 2008 10:08 pm
Posts: 1958
Location: Missouri
First name: Patrick
Last Name: Hanna
State: Missouri
Country: USA
I think an airbrush would be preferred. If you don't have an airbrush, you're still okay. Set your spray gun with a round spray pattern and just enough air pressure and flow to atomize your mix the way you want. You will, of course, experiment on cardboard for that step. Practice until you're confident of your flow and your touch on the trigger. Then set your instrument up and aim WELL OUTSIDE the perimeter of the instrument. With a gentle finger on the trigger to limit flow, and with the air pressure you've determined on your cardboard test piece, spray all around the instrument. Gradually "sneak in" on the edge of your instrument. Go all around, starting and stopping well off the piece. Stop and look it over. Repeat as needed to get the effect you want. It can be done. I've done it, and so can you. Mine was so gently shaded that I didn't even call it a sunburst. I call mine "shading." But the principle is the same. Here's proof: Vintage amber overall with a super-subtle and transparent dark brown shading about 2"--3" all around the edges. I did this with a standard gun, as described above. Go for it!

Patrick


You do not have the required permissions to view the files attached to this post.

Top
 Profile  
 
lespaul123
 Post subject: Re: micro sunburst
PostPosted: Wed Mar 28, 2012 9:14 pm 
Offline
Contributing Member
Contributing Member

Joined: Tue Mar 02, 2010 9:51 pm
Posts: 193
Location: Cleveland, Ohio
First name: Robbie
Last Name: Fraelich
Focus: Build
Status: Amateur
I have an airbrush laying around if you need one. If you pay the shipping back and forth when your done, I don't mind. Its an iwata hpc, its very nice and should do you fine.

Robbie
Top
 Profile  
 
Lavrov Guitars
 Post subject: Re: micro sunburst
PostPosted: Thu Mar 29, 2012 12:50 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jun 17, 2011 8:35 pm
Posts: 363
First name: Maks
Last Name: Lavrov
Focus: Build
Status: Amateur
lespaul123 wrote:
I have an airbrush laying around if you need one. If you pay the shipping back and forth when your done, I don't mind. Its an iwata hpc, its very nice and should do you fine.

Robbie

Thanks Robbie, but for now this is just in the planning :) that's real nice of you to offer though!
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 7 posts ] 

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 21 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com