Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Oct 31, 2024 5:51 pm


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 137 posts ]  Go to page 1, 2, 3, 4, 5, 6  Next
Author Message
PostPosted: Tue Apr 12, 2022 2:05 pm 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 13370
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
Starting a new thread so it loads faster:

Two things from me today.

First is the stick that I use for neck resets and more specifically to clean up the dovetail, both sides. It's specifically designed to do this task, made out of oak but could be made out of any durable wood. The dips and curves all have functionality to get into the dovetail, both sides and help get that perfect fit or just clean up the mess from the f*ctory first.

I put 120 paper on mine and one piece will last a bunch of resets.

I got the idea from Dave Collins and he got it from Bryan Galloup's school I think. It's always been important to me to attribute things I share to the people who shared them with me.

Next is a simple 1/4 wood dowel 14" long. Perfect for going through the hole in the tail block and plugging it right into a pickup jack and then pulling the whole assembly into the tail block hole. I leave the dowel in until I have the proper amount or jack proud of the tail block and then I thread on the nut and washers and pull the dowel. The only thing you really need to do is cut it to length. 14" is optional your's can be shorter or longer deepening on the body styles you work on. I find 14" does em all so that's what I use.

This is also less dangerous than a metal 1/4 drill bit is you slip and poke the guitar wood is softer.

These are two very simple, cheap to make tools that are used every day in a busy commercial shop. With this said most of what we use we made ourselves because at the time we could not purchase them or we are simply crafty and/or cheap. You decide. :)


You do not have the required permissions to view the files attached to this post.



These users thanked the author Hesh for the post (total 2): Kbore (Mon Jul 24, 2023 3:21 pm) • Chris Pile (Tue Apr 12, 2022 2:13 pm)
Top
 Profile  
 
PostPosted: Fri Apr 15, 2022 6:36 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Oct 07, 2010 5:28 pm
Posts: 687
First name: Casey
Last Name: Cochran
City: Gainesville
State: GA
Zip/Postal Code: 30501
Country: USA
Focus: Build
I’ve been meaning to post this on one of the “my frets won’t fully seat” threads: The best tool I have found for chamfering the slots is a Dem-BartImage
gun stock checkering tool. It cuts easily, even right up to the binding.


Sent from my iPhone using Tapatalk

_________________
Good judgement comes from experience. Experience comes from poor judgement.



These users thanked the author Casey Cochran for the post (total 4): Michaeldc (Fri Jul 07, 2023 7:23 am) • Hesh (Fri Apr 15, 2022 12:50 pm) • Barry Daniels (Fri Apr 15, 2022 9:19 am) • joshnothing (Fri Apr 15, 2022 7:47 am)
Top
 Profile  
 
PostPosted: Fri Apr 15, 2022 9:00 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2659
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
Setting the neck angle on electrics using a digital protractor.
I place the bridge and fretboard at the desired location on top of the body.
I lay a straight edge across the end of the fretboard and a bridge saddle.
Place the protractor on the body and zero out the reading.
Place the protractor on the straight edge and record the angle.
I can add a toothpick to simulate fret height, but usually do not.

To cut the neck pocket, zero the protractor on the body, then place it on the template and adjust the template angle to match the previously recorded angle.

My guitars have the fretboard end flush to the body.
This has been a very accurate way to get the perfect angle.
The protractor cost $15

_________________
wah
Wah-wah-wah-wah
Wah



These users thanked the author dzsmith for the post: Hesh (Fri Apr 15, 2022 12:51 pm)
Top
 Profile  
 
PostPosted: Sat Apr 16, 2022 1:34 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Aug 19, 2005 4:02 am
Posts: 3260
Location: The Woodlands, Texas
First name: Barry
Last Name: Daniels
Casey, that checkering tool looks perfect for that job. So I started searching for it and it looks like Dem-Bart is out of business. I can't find the tool or even replacement cutters available anywhere. Suggestions?



These users thanked the author Barry Daniels for the post: Hesh (Sun Apr 17, 2022 2:46 am)
Top
 Profile  
 
PostPosted: Sat Apr 16, 2022 2:03 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Jun 02, 2013 8:16 am
Posts: 482
First name: Brian
City: U.P.
State: Michigan
Focus: Build
https://www.woodcarverssupply.com/Gunstock-Checkering-Tools/products/190/

Checkering tool source.

_________________
Brian R, Wood Mechanic
N8ZED



These users thanked the author rbuddy for the post: Hesh (Sun Apr 17, 2022 2:46 am)
Top
 Profile  
 
PostPosted: Sat Apr 16, 2022 2:03 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Nov 04, 2010 1:46 pm
Posts: 2149
First name: Freeman
Last Name: Keller
Focus: Build
Status: Amateur
Another fretting trick. I make a little L shaped tool out of a piece of the fret wire I am going to install. File the barbs off and slide it back and forth in the slot to make sure it is clean and deep enough to take the fret. Note that fretwire, even from the same manufacturer, can have different depths of tangs - I make a tool out of each size wire that I use

Attachment:
IMG_7184-1.jpg


Attachment:
IMG_7186-1.jpg


You do not have the required permissions to view the files attached to this post.



These users thanked the author Freeman for the post (total 4): Kbore (Mon Jul 24, 2023 3:32 pm) • Hesh (Sun Apr 17, 2022 2:47 am) • Robbie_McD (Sat Apr 16, 2022 5:18 pm) • Chris Pile (Sat Apr 16, 2022 2:56 pm)
Top
 Profile  
 
PostPosted: Sat Apr 16, 2022 2:57 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5815
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
Cool, Freeman. Now dip that "handle" in some thick epoxy and make it more finger friendly.

_________________
"Act your age, not your shoe size" - Prince



These users thanked the author Chris Pile for the post: Hesh (Sun Apr 17, 2022 2:47 am)
Top
 Profile  
 
PostPosted: Sat Apr 16, 2022 2:59 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Aug 19, 2005 4:02 am
Posts: 3260
Location: The Woodlands, Texas
First name: Barry
Last Name: Daniels
Thanks Brian. I may have to spring for that brand of the tool. Was hoping to find the Dem-Bart version because it would save me about $50.



These users thanked the author Barry Daniels for the post: Hesh (Sun Apr 17, 2022 2:48 am)
Top
 Profile  
 
PostPosted: Sat Apr 16, 2022 3:15 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri Jan 11, 2013 2:26 pm
Posts: 482
First name: Carl
Last Name: Dickinson
City: Forest Ranch
State: California
Zip/Postal Code: 95942
Country: USA
Focus: Build
Status: Amateur
Re. Chris' suggestion. You could dip it in liquid electric wire insulation to create a handle too.



These users thanked the author CarlD for the post (total 2): Chris Pile (Sun Apr 17, 2022 10:42 am) • Hesh (Sun Apr 17, 2022 2:48 am)
Top
 Profile  
 
PostPosted: Sat Apr 16, 2022 5:57 pm 
Offline
Cocobolo
Cocobolo

Joined: Mon Apr 14, 2008 3:20 am
Posts: 376
Location: Kapolei HI
First name: Aaron
Focus: Build
Status: Semi-pro
Chill in tray.
Attachment:
B1D9BD1A-AC1D-42FD-B088-F41E9D430823.jpeg

Cut smaller.
Freeze.
Dispense from bottles with SS nuts/bolts to keep upright in hot pot, instead of using the pot and brush. I also use a BabyBot.
Freeze the bottles/Babybot after use to extend shelf life.


You do not have the required permissions to view the files attached to this post.


Last edited by Aaron O on Sat Apr 16, 2022 9:24 pm, edited 1 time in total.


These users thanked the author Aaron O for the post (total 2): Kbore (Mon Jul 24, 2023 3:33 pm) • Hesh (Sun Apr 17, 2022 2:49 am)
Top
 Profile  
 
PostPosted: Sat Apr 16, 2022 7:52 pm 
Offline
Koa
Koa
User avatar

Joined: Mon Sep 05, 2011 10:45 pm
Posts: 1476
First name: Trevor
Last Name: Gore
City: Sydney
Country: Australia
Focus: Build
Status: Professional
I didn't have any problem finding the Dem-Bart site. It's here. However, which tool number is it that you use, Casey?

Thanks.

_________________
Trevor Gore, Luthier. Australian hand made acoustic guitars, classical guitars; custom guitar design and build; guitar design instruction.

http://www.goreguitars.com.au



These users thanked the author Trevor Gore for the post: Hesh (Sun Apr 17, 2022 2:49 am)
Top
 Profile  
 
PostPosted: Sat Apr 16, 2022 8:38 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Aug 19, 2005 4:02 am
Posts: 3260
Location: The Woodlands, Texas
First name: Barry
Last Name: Daniels
Yep, I found the site too, but a contact email to them has been unanswered for several days. All of the second tier distributors of Den-Bart tools are out of stock. The writing is on the wall. I am looking for the F-1 cutter which is the fine, single line cutter.

Trevor, you might try looking for distributors in your area who carry these tools.


Top
 Profile  
 
PostPosted: Sat Apr 16, 2022 8:47 pm 
Offline
Koa
Koa
User avatar

Joined: Mon Sep 05, 2011 10:45 pm
Posts: 1476
First name: Trevor
Last Name: Gore
City: Sydney
Country: Australia
Focus: Build
Status: Professional
Thanks, Barry.

_________________
Trevor Gore, Luthier. Australian hand made acoustic guitars, classical guitars; custom guitar design and build; guitar design instruction.

http://www.goreguitars.com.au


Top
 Profile  
 
PostPosted: Sun Apr 17, 2022 2:48 am 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 13370
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
Chris Pile wrote:
Cool, Freeman. Now dip that "handle" in some thick epoxy and make it more finger friendly.


Chris that was a sneaky cool way to offer your own tip and trick :) Very cool!



These users thanked the author Hesh for the post: Chris Pile (Sun Apr 17, 2022 10:41 am)
Top
 Profile  
 
PostPosted: Sun Apr 17, 2022 8:25 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5815
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
Quote:
Chris that was a sneaky cool way to offer your own tip and trick :) Very cool!


Well, I was a tool maker for a long time in my other job.

_________________
"Act your age, not your shoe size" - Prince



These users thanked the author Chris Pile for the post: Hesh (Sun Apr 17, 2022 10:50 am)
Top
 Profile  
 
PostPosted: Sun Apr 17, 2022 10:21 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Jun 02, 2013 8:16 am
Posts: 482
First name: Brian
City: U.P.
State: Michigan
Focus: Build
For an economical substitute for the checkering tool to ease fret slots look for triangular bent riffler files. That's what I use. You can get sets cheap too and they usually have one in each set. But for <$30 you can get a Swiss file double ended. You can always snap or grind off the point to make it more like a checkering tool. Lots to choose from with a web search.

_________________
Brian R, Wood Mechanic
N8ZED



These users thanked the author rbuddy for the post (total 5): Kbore (Mon Jul 24, 2023 3:34 pm) • joshnothing (Mon Apr 18, 2022 7:16 am) • Hesh (Sun Apr 17, 2022 10:50 am) • Chris Pile (Sun Apr 17, 2022 10:41 am) • Barry Daniels (Sun Apr 17, 2022 10:36 am)
Top
 Profile  
 
PostPosted: Mon Apr 18, 2022 7:45 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Oct 07, 2010 5:28 pm
Posts: 687
First name: Casey
Last Name: Cochran
City: Gainesville
State: GA
Zip/Postal Code: 30501
Country: USA
Focus: Build
The Dem-Bart cutter that I use is the C-1. I get them from Brownells.

Edit: A quick look at their site does not show a listing for that part anymore. They do list a couple of single groove V cutters, this one being the only one they show in stock right now:
https://www.brownells.com/gunsmith-tool ... 26290.aspx

_________________
Good judgement comes from experience. Experience comes from poor judgement.



These users thanked the author Casey Cochran for the post: Hesh (Mon Apr 18, 2022 11:13 am)
Top
 Profile  
 
PostPosted: Tue Apr 19, 2022 3:43 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue May 13, 2008 10:44 am
Posts: 6256
Location: Virginia
I'm not sure what took me so long to make this and I'm sure some of you already do but... To get diamond cleats aligned perfectly:

Image

Image

Image

Image

Image



These users thanked the author jfmckenna for the post (total 4): Kbore (Mon Jul 24, 2023 3:36 pm) • Chris Pile (Mon May 02, 2022 1:21 pm) • Hesh (Wed Apr 20, 2022 9:19 am) • Robbie_McD (Wed Apr 20, 2022 7:53 am)
Top
 Profile  
 
PostPosted: Tue Apr 19, 2022 3:52 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Dec 14, 2007 3:21 pm
Posts: 3384
Location: Alexandria MN
Someone posted about these little watercolor brushes. I find more and more stuff they work great for including shellacking thin rosette channels.

https://www.amazon.com/gp/product/B07D2 ... UTF8&psc=1

Image92A4F2E6-D511-40CB-B2B9-C95DF9953760 by Terence Kennedy, on Flickr

_________________
It's not what you don't know that hurts you, it's what you do know that's wrong.



These users thanked the author Terence Kennedy for the post (total 3): Kbore (Mon Jul 24, 2023 3:37 pm) • joshnothing (Wed Apr 20, 2022 5:50 am) • Hesh (Wed Apr 20, 2022 2:11 am)
Top
 Profile  
 
PostPosted: Wed Apr 20, 2022 5:50 am 
Offline
Koa
Koa

Joined: Tue Jan 15, 2013 10:00 pm
Posts: 985
First name: Josh
Focus: Build
Status: Amateur
Terence Kennedy wrote:
Someone posted about these little watercolor brushes. I find more and more stuff they work great for including shellacking thin rosette channels.

https://www.amazon.com/gp/product/B07D2 ... UTF8&psc=1

Image92A4F2E6-D511-40CB-B2B9-C95DF9953760 by Terence Kennedy, on Flickr

That was me! They’re great huh? I need to find a bulk source so I can really stock up as I use them for so many things now. Great for touch up jobs, like painting with thin CA where you don’t want to trash a nice artists brush. Also with solvents cleaning out cracks and small areas like in and around electric guitar saddles etc



These users thanked the author joshnothing for the post (total 3): Kbore (Mon Jul 24, 2023 3:38 pm) • Dmaxwell (Sat May 07, 2022 12:06 am) • Hesh (Wed Apr 20, 2022 9:19 am)
Top
 Profile  
 
PostPosted: Mon May 02, 2022 1:14 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Aug 19, 2005 4:02 am
Posts: 3260
Location: The Woodlands, Texas
First name: Barry
Last Name: Daniels
I finally found a source of the Dem-Bart checkering bits at KVWoodcarvingsupplies.com. They are in Canada but they only charged me $5 for shipping to Texas, unlike another supplier that wanted $36 for shipping these tiny bits from Canada. I ordered some coarse (C-1) and fine (F-1) but the C-1 looks like it will work great. I was able to find a handle for about $12 from eBay, but you might have to look around awhile to find another. Or you could order a handle that is already attached to another style cutter. I am excited to try this tool on my next fret job because it is a step up from the straight triangle file I have been using previously.


Last edited by Barry Daniels on Mon May 02, 2022 3:08 pm, edited 1 time in total.


These users thanked the author Barry Daniels for the post (total 2): Kbore (Mon Jul 24, 2023 3:52 pm) • Hesh (Tue May 03, 2022 3:35 am)
Top
 Profile  
 
PostPosted: Mon May 02, 2022 2:52 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Nov 04, 2010 1:46 pm
Posts: 2149
First name: Freeman
Last Name: Keller
Focus: Build
Status: Amateur
jfmckenna wrote:
I'm not sure what took me so long to make this and I'm sure some of you already do but... To get diamond cleats aligned perfectly:



My method is much much simpler. I choose a long enough bridge clamp to get to where I want to put the cleat and take a piece of masking tape and wrap it backwards on itself so there are sticky sides top and bottom to hold the cleat. Put something on the top to act as a clamping caul, spend a few minutes futzing around to get the angle and location right (the threaded part of the clamp makes that easy), put a dab of glue on it and, bingo

Attachment:
IMG_3988-1.jpg


Attachment:
IMG_3987-1.jpg


Could use double stick tape but the masking tape releases real easy, even if it gets a little glue on it. (this guitar had some damage on the binding, ignore the quick clamps)


You do not have the required permissions to view the files attached to this post.



These users thanked the author Freeman for the post (total 3): jfmckenna (Tue May 03, 2022 8:52 am) • Robbie_McD (Tue May 03, 2022 7:58 am) • Hesh (Tue May 03, 2022 3:36 am)
Top
 Profile  
 
PostPosted: Tue May 03, 2022 3:37 am 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 13370
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
I stick my cleats on a small rare earth magnet being careful to keep the desired orientation when I place the cleat.


Top
 Profile  
 
PostPosted: Tue May 03, 2022 11:38 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Dec 14, 2007 3:21 pm
Posts: 3384
Location: Alexandria MN
Speaking of magnets, here is a method I learned from one of the real veteran repair guys in Minneapolis/St Paul.

Model airplane plywood comes in 1/64" and 1/32" widths. He uses circular cleats cut from the stuff with a plug cutter. I have been using 5/8". Fits perfectly on a magnet and you don't have to worry about orientation. He has not noticed any sonic issues vs a traditional diamond spruce cleat and they seen to hold as well.

I have been using them successfully.

Any thoughts Hesh/others?

ImageIMG_6747 by Terence Kennedy, on Flickr

ImageCleat II by Terence Kennedy, on Flickr

_________________
It's not what you don't know that hurts you, it's what you do know that's wrong.



These users thanked the author Terence Kennedy for the post (total 4): Kbore (Mon Jul 24, 2023 3:54 pm) • Robbie_McD (Wed May 04, 2022 5:44 pm) • Hesh (Wed May 04, 2022 2:25 am) • SteveSmith (Tue May 03, 2022 12:54 pm)
Top
 Profile  
 
PostPosted: Tue May 03, 2022 11:39 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Dec 14, 2007 3:21 pm
Posts: 3384
Location: Alexandria MN
Terence Kennedy wrote:
Speaking of magnets, here is a method I learned from one of the real veteran repair guys in Minneapolis/St Paul.

Model airplane plywood comes in 1/64" and 1/32" widths. He uses circular cleats cut from the stuff with a plug cutter. I have been using 5/8". Fits perfectly on a magnet and you don't have to worry about orientation. He has not noticed any sonic issues vs a traditional diamond spruce cleat and they seem to hold as well.

I have been using them successfully.

Any thoughts Hesh/others?

ImageIMG_6747 by Terence Kennedy, on Flickr

ImageCleat II by Terence Kennedy, on Flickr

_________________
It's not what you don't know that hurts you, it's what you do know that's wrong.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 137 posts ]  Go to page 1, 2, 3, 4, 5, 6  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com