***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Tue Aug 19, 2025 11:32 pm


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 1 of 1
  [ 21 posts ] 
  Print view Previous topic | Next topic 
Author Message
Rob Flindall
PostPosted: Mon Dec 09, 2013 11:40 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jun 18, 2012 10:04 pm
Posts: 184
First name: Robert
Last Name: Flindall
City: Peterborough
State: Ontario
Country: Canada
Focus: Build
Status: Amateur
Every time I place an order with Stew Mac for plastic binding, I swear under my breath as I press the purchase button - come on, $4.50+ is ludicrous for a small piece of plastic 65" long. I've been scouring the internet, including ebay for alternatives and I keep coming across both ABS and PVC binding material. I've tried doing some research on both and I keep coming up with nothing.

Can anyone advise if there are pluses or minuses to using each? Stew Mac sells ABS binding, but I see a lot of PVC binding from China that is extremely cheap, or should I say, appropriately priced for such a small piece of plastic.

I really appreciate any input. I'm holding off purchasing some large quantities until I find out more.

_________________
Rob Flindall
Flindall Guitars
http://www.flindallguitars.com
https://www.facebook.com/FlindallGuitars
Top
 Profile  
 
emoney
PostPosted: Tue Dec 10, 2013 6:19 am 
Offline
Cocobolo
Cocobolo

Joined: Wed Oct 16, 2013 12:22 pm
Posts: 104
First name: Eric
Last Name: Reams
City: Hudson
State: FL
Zip/Postal Code: 34667
Country: USA
Focus: Build
Status: Amateur
The ABS stuff, which can be had on Ebay from some sellers much cheaper, will melt in Acetone to make "binding glue". I'm not
sure the PVC stuff will.
Top
 Profile  
 
Alexandru Marian
PostPosted: Tue Dec 10, 2013 6:56 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Mar 22, 2007 10:59 pm
Posts: 2103
Location: Bucharest, Romania
Country: Romania
Focus: Build
Status: Professional
How about maple?

_________________
Build log


These users thanked the author Alexandru Marian for the post: ZekeM (Tue Dec 10, 2013 7:40 am)
Top
 Profile  
 
ZekeM
PostPosted: Tue Dec 10, 2013 7:43 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Dec 21, 2012 11:52 am
Posts: 1388
First name: Zeke
Last Name: McKee
City: Goodlettsville
State: TN
Zip/Postal Code: 37070
Country: United States
Focus: Build
Status: Amateur
I've never understood the desire to use plastic binding on a custom built guitar. To me it really ruins the look of an otherwise nice guitar. Sure I understand factory built guitars get it because it's cheap and easy to use, but even then I hate the look of the stuff.

Moral of the story, use wood binding!
Top
 Profile  
 
Goodin
PostPosted: Tue Dec 10, 2013 8:44 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Dec 20, 2010 7:15 pm
Posts: 1041
First name: Gil
Last Name: Draper
City: Knoxville
State: Tennessee
Country: USA
Focus: Build
Status: Professional
Have you checked out LMI? Their ABS binding is $2.50-3.50. They have many options for plastic/celluloid binding.

For the naysayers of plastic. Check out this Circa...I think it looks great. Black plastic looks just like ebony under a gloss finish.

Attachment:
Slopeendpinbig (Medium).jpg


You do not have the required permissions to view the files attached to this post.

Top
 Profile  
 
ZekeM
PostPosted: Tue Dec 10, 2013 9:07 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Dec 21, 2012 11:52 am
Posts: 1388
First name: Zeke
Last Name: McKee
City: Goodlettsville
State: TN
Zip/Postal Code: 37070
Country: United States
Focus: Build
Status: Amateur
I can understand the use I tortoid, or ivoroid due to the restrictions and moral dilemmas surrounding using real tortoise or ivory. To me though I've just never understood the use of white plastic or black plastic. Just a preference I guess but I'm not a fan. Especially of the white plastic. I've always been that way though. Even on a high end factory guitar when I see a stark white plastic binding it just looks cheap and turns me off. I just don't get why anyone would choose to have that on a custom built instrument. But to each his own I guess.
Top
 Profile  
 
Rob Flindall
PostPosted: Tue Dec 10, 2013 9:39 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jun 18, 2012 10:04 pm
Posts: 184
First name: Robert
Last Name: Flindall
City: Peterborough
State: Ontario
Country: Canada
Focus: Build
Status: Amateur
Thanks for the input guys. I should have included purfling material as well in my initial question. For the most part I've been using wood binding with plastic purfling. Is there a preference between the two types of plastics and are there any adhesion problems if you put both ABS and PVC in the same purfling? (I use CA glue for my bindings and purflings for the most part).

_________________
Rob Flindall
Flindall Guitars
http://www.flindallguitars.com
https://www.facebook.com/FlindallGuitars
Top
 Profile  
 
klooker
PostPosted: Tue Dec 10, 2013 10:18 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Aug 17, 2010 3:31 pm
Posts: 1682
First name: Kevin
Last Name: Looker
City: Worthington
State: OH
Zip/Postal Code: 43085
Country: USA
Focus: Build
Status: Amateur
Todd Stock wrote:
Ivoroid or tortoid from Guitarmakers Connection is available, along with end graft and heel caps...


Do they have Ivoroid or Tortoise now? Last time I tried to order some they said they weren't offering it anymore.

Kevin Looker

_________________
I'm not a luthier.
I'm just a guy who builds guitars in his basement.
It's better than playing golf.
Top
 Profile  
 
Clay S.
PostPosted: Tue Dec 10, 2013 11:16 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sun Mar 30, 2008 8:20 am
Posts: 5968
You can buy PVC edgebanding (for cabinet doors) in 2 or 3mm thicknesses about 1 inch wide in 200 ft rolls. Last time I bought some it was about $70 a roll. I cut it to width on with a table saw. You can get a lot of edge binding out of one roll so pick a shade that you really like. There are a lot of "whites" available as well as thousands of colors. To me ebony binding looks like black plastic, and black plastic iseasier to work with and gives a "tougher" edge. ABS is also sold for edgebanding.
Top
 Profile  
 
Greg B
PostPosted: Tue Dec 10, 2013 12:41 pm 
Offline
Koa
Koa

Joined: Mon Jun 30, 2008 1:06 am
Posts: 508
First name: Greg
Last Name: B
City: Los Angeles
State: California
PVC is a little softer and more flexible, typically, than ABS. Shellac doesn't stick well to PVC, though this can be overcome. The stuff LMI sells makes really bright white/black purflings.

It's always possible to buy larger sheets of material from plastic suppliers, and resaw and process them yourself.

I prefer plastic bindings on steel strings, usually. Wood looks too hippy dippy. beehive
Top
 Profile  
 
tbluthier
PostPosted: Wed Dec 11, 2013 11:21 pm 
Offline
Walnut
Walnut

Joined: Sun Jun 10, 2012 9:19 pm
Posts: 23
First name: John
Last Name: Thompson
City: Loyalhanna
State: PA
Zip/Postal Code: 15661
Country: USA
Focus: Repair
Status: Professional
Well, no one else has said it so, I will. Repairing binding is a pain in the hind end unless the binding is a plastic that can be dissolved with a chemical. Fancy wood binding do look beautiful and I'm sure that is part of their purpose however, another part of their purpose is to protect the wood at the edges of the instrument from damage. It stands to reason that most of the damage caused by bumps and dings occurs at the edges of the instrument and the plastic binding is there to take the beating. Celluloid is really easy to repair. ABS is pretty easy too. I've used chopped up Lego bricks dissolved in acetone to fix a few.

Having said that, I'm pretty-much a repairman and I tend to look at things from that stand-point. Curly maple binding looks fantastic to my eyes...
Top
 Profile  
 
fingerstyle1978
PostPosted: Wed Dec 11, 2013 11:43 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Mar 06, 2010 4:15 pm
Posts: 1701
First name: Joey
Last Name: Holliday
City: Palmetto
State: Florida
Zip/Postal Code: 34221
Country: United States
Focus: Build
Status: Semi-pro
I also only use wood binding. It's cheap and you can make it yourself. But that's just a personal preference. I'll tell you what though, Some flimsy plastic might have been the better way to go judging from my last binding job! lol. I'm still dealing with that mess, but then again I'm an amateur with zero skill :P
Top
 Profile  
 
Ken McKay
PostPosted: Thu Dec 12, 2013 7:02 am 
Offline
Koa
Koa

Joined: Fri Jan 25, 2008 9:55 am
Posts: 982
Location: Traverse City Michigan
You can get ABS from Shellex in Germany. It is perfect dimension so little work goes into binding a guitar. It is a little peachy in color for my liking though. I have another supplier in Germany who I got a large roll from but need to thin it for use. I use a hand plane jig to thin it and it is a PIA but reliable. I have never had luck with a router jig. I just got some of the strips of ABS ivory color from China and it is fine, although over sized. PM me if you need more info.

_________________
Ken
Top
 Profile  
 
Tai Fu
PostPosted: Fri Dec 13, 2013 1:04 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Sep 24, 2008 8:55 pm
Posts: 3820
Location: Taiwan
First name: Tai
Last Name: Fu
City: Taipei
Country: Taiwan
Focus: Repair
Status: Semi-pro
They got some decent celluloid from China... say what you will but they still make good celluloid that I doubt is different from the Italian stuff.

_________________
Cat-gut strings are made from kitten guts, stretched out to near breaking point and then hardened with grue saliva. As a result these give a feeling of Pain and anguish whenever played, and often end up playing themselves backwards as part of satanic rituals.

Typhoon Guitars
http://www.typhoon-guitars.com
Top
 Profile  
 
the Padma
PostPosted: Fri Dec 13, 2013 1:25 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Feb 21, 2008 8:57 pm
Posts: 1982
Location: 8.33±0.35 kpc from Galactic center, 20 light-years above the equatorial in the Sol System
First name: duh
Last Name: Padma
City: Professional Sawdust Maker
Focus: Build
duh ?adma, him being a Mr. Natural kinda dude
don't gotts much to say about ABS, PVC or chopped up leggos other than pfft
Wood is cheap enough, easy to do a run of banding and purfelling and well gee virtually the whole instrument. How is that possible? laughing6-hehe

_________________
.

Audiences and dispensations on Thursdays ~ by appointment only.


.
Top
 Profile  
 
Tai Fu
PostPosted: Fri Dec 13, 2013 1:28 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Sep 24, 2008 8:55 pm
Posts: 3820
Location: Taiwan
First name: Tai
Last Name: Fu
City: Taipei
Country: Taiwan
Focus: Repair
Status: Semi-pro
Just try and repair a wood binding... it's impossible to make it seamless unless you do them completely over.

_________________
Cat-gut strings are made from kitten guts, stretched out to near breaking point and then hardened with grue saliva. As a result these give a feeling of Pain and anguish whenever played, and often end up playing themselves backwards as part of satanic rituals.

Typhoon Guitars
http://www.typhoon-guitars.com
Top
 Profile  
 
the Padma
PostPosted: Fri Dec 13, 2013 3:03 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Feb 21, 2008 8:57 pm
Posts: 1982
Location: 8.33±0.35 kpc from Galactic center, 20 light-years above the equatorial in the Sol System
First name: duh
Last Name: Padma
City: Professional Sawdust Maker
Focus: Build
Well Tai...

your absolutely right

thats one of the reasons me don't do no stinkin repair work no more, never again. laughing6-hehe

But that aside...if the client grumbles about the cost, just send them to that cheap guitar place...ebay...they smash it up...is simple, they can buy a new one.

Plastic was invented for the peoples who wanted it all now, immediately, in every colour and dirt cheap, dang the economy and the environment. So now what? Eh?

See Tai, everything has its plus and minus, its good side and its bad, so to it is with loofering...and ones attitude towards it.


blessings

_________________
.

Audiences and dispensations on Thursdays ~ by appointment only.


.
Top
 Profile  
 
Brad Goodman
PostPosted: Fri Dec 13, 2013 10:35 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Sun Feb 27, 2005 10:11 am
Posts: 2221
Todd Stock wrote:
Ivoroid or tortoid from Guitarmakers Connection is available, along with end graft and heel caps. They also have Bolteron in black and white, which is the stark white stuff Martin and Taylor use for binding.

If intent on a white binding, maybe ivoroid with fiber/maple...glues with plastics glues or just wipe the ivoroid or tortoid with acetone and glue with LMI white or Titebond. As Filippo mentioned, holly is very nice, and looks like the old ivory-bound Martins from anything more than a few inches.

Martin and Gibson produced hundreds of thousands of ivoroid, tortoid, or black/white cellulose nitrate bound guitars...these guitars still define 'vintage' to many players. For canonical Martin or Gibson guitars, ivoroid, tortoid, etc. are common choices by top builders. I disagree with the notion that custom guitars need wood binding - it's part of the look that some builders shoot for, but I prefer to go with binding that looks and feels appropriate to the project, versus what happens to be in vogue at the time of construction.

Bottom line? Bind with what you want to bind in - you'll be in good company. I've done plastic and wood, and find ivoroid and white cellulose nitrate to be as much work to get a nice binding job as curly maple, holy, birdseye, or other light color woods. Ebonies - any of them - and black plastic are quite easy. Tortoid seems about as tough as lighter rosewoods like coco or king wood. Pretty sure Mario said essentially the same thing - given his market, he often binds in cellulose nitrate, and as with most things in luthiery, notes challenges unique to working in ivoroid or tortoid.



Todd is right on in my opinion. When I make my Stella "clones" I us ivoroid for the binding it has the right "vibe" to it, just wouldn't look right with wood-and I love wood binding!

The same goes for old style archtops- I use 8 line black/white ABS purfling.

If you are looking to get cheap binding,as someone said buy it in sheets and cut it up on the table saw. I used to buy it from a company called leathertone, but I think they aren't around anymore-they used the sheets for engraved signs.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 21 posts ] 

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: DennisK and 27 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com