Official Luthiers Forum! • View topic

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

Trimming Brace Ends

Page 1 of 1

[ 1 post ]

Print view

Previous topic | Next topic

Author

Message

Terence Kennedy

Post subject: Trimming Brace Ends

Posted: Mon Dec 02, 2024 3:08 pm

Brazilian Rosewood

Joined: Fri Dec 14, 2007 3:21 pm
Posts: 3440
Location: Alexandria MN

I was fitting a back today and couldn’t remember if I posted this before but a little tape on an X-Acto saw is a great way to trim brace ends without damaging the back or top. You can finish the cut with a #11 blade.

IMG_9698 by Terence Kennedy, on Flickr

_________________
It's not what you don't know that hurts you, it's what you do know that's wrong.

These users thanked the author Terence Kennedy for the post (total 4): Hesh (Tue Dec 03, 2024 5:03 am) • Kbore (Mon Dec 02, 2024 6:41 pm) • SteveSmith (Mon Dec 02, 2024 5:19 pm) • Colin North (Mon Dec 02, 2024 4:33 pm)

Top

Page 1 of 1

[ 1 post ]

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: jfrench, Melt in the Sun and 26 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: