Official Luthiers Forum! • View topic

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

Rosette circle cutters

Page 1 of 1

[ 5 posts ]

Print view

Previous topic | Next topic

Author

Message

dofthesea

Post subject: Rosette circle cutters

Posted: Mon Jun 27, 2016 1:29 am

Contributing Member

Joined: Sat Sep 14, 2013 9:46 pm
Posts: 858
Location: Napa Valley
First name: David
Last Name: Foster
City: Napa
State: CA
Zip/Postal Code: 94558
Country: USA
Focus: Build
Status: Amateur

Just wanted to share this. A guy over on the UU forum is offering a Rosette cutter guide with 1/8" and 3/16" registration pin holes. all for $8 plus shipping a steal. Wide should try to convince him to do a guitar size guide as well.

Scroll down towards the bottom of the posts.

http://forum.ukuleleunderground.com/sho ... cle-cutter

_________________
https://www.instagram.com/fostinoguitars/
https://www.facebook.com/PuraVidaUkuleles/

Top

Colin North

Post subject: Re: Rosette circle cutters

Posted: Mon Jun 27, 2016 4:59 am

Contributing Member

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5571
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro

1/10th " steps are no use to me, sorry.
I'll stick with my wells-carol.

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.

Top

dofthesea

Post subject: Re: Rosette circle cutters

Posted: Tue Jun 28, 2016 3:39 am

Contributing Member

Collin for some reason I was having a blond moment. Your absolutely correct on that comment. It also isn't adjustable.

_________________
https://www.instagram.com/fostinoguitars/
https://www.facebook.com/PuraVidaUkuleles/

Top

jfmckenna

Post subject: Re: Rosette circle cutters

Posted: Tue Jun 28, 2016 7:16 am

Brazilian Rosewood

Joined: Tue May 13, 2008 10:44 am
Posts: 6261
Location: Virginia

But in his case it seems to work fine. If you want to remain consistent from rosette to rosette and build them the same for each one and it fits within your paradigm then it's probably a very useful tool.

Top

SteveSmith

Post subject: Re: Rosette circle cutters

Posted: Tue Jun 28, 2016 9:15 am

Contributing Member

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7466
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair

Biggest problem I see is that you cannot move the bit incrementally to open up a channel. As long as an exact bit size works at the available radii than that would be ok.

_________________
Steve Smith
"Music is what feelings sound like"

Top

Page 1 of 1

[ 5 posts ]

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: doncaparker and 37 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: