***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sun Jul 27, 2025 4:05 am


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 1 of 1
  [ 13 posts ] 
  Print view Previous topic | Next topic 
Author Message
David Newton
PostPosted: Thu Jun 09, 2011 5:08 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Oct 30, 2007 9:13 am
Posts: 1167
Location: United States
State: Texas
Focus: Repair
Status: Professional
I'm probably going to get one of these.
So which one is "the one"?
Thanx!

_________________
https://www.facebook.com/profile.php?id=100008907949110
Top
 Profile  
 
Laurent Brondel
PostPosted: Thu Jun 09, 2011 6:22 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Aug 31, 2005 7:30 am
Posts: 1792
Location: United States
David, I have the 4151 Dragon. Given the shape and the finish it leaves I only need a cabinet file or scraper after it (and sandpaper). The pointy conical shape allows it to get anywhere, like neck heels, and the big flat part is good to level neck barrels for example.

_________________
Laurent Brondel
West Paris, Maine - USA
http://www.laurentbrondel.com/
Top
 Profile  
 
ChuckB
PostPosted: Thu Jun 09, 2011 7:09 pm 
Offline
Koa
Koa

Joined: Sat Mar 01, 2008 2:44 pm
Posts: 692
I have the coarse Dragon rasp and really like it. Cuts fast, great for the heel.

Chuck

_________________
_________________
Top
 Profile  
 
John Mayes
PostPosted: Thu Jun 09, 2011 8:08 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Sat Jan 08, 2005 3:37 am
Posts: 2670
Location: United States
First name: John
Last Name: Mayes
City: Norman
State: OK
Focus: Build
Status: Professional
I have all 4 of the dragon rasps. They are all great and I use them all. The one that gets the least use is the small coarse one. The one that gets the most use is the large coarse one, although the large fine one is perfectly capable of moving a lot of material fast. The small fine one I really like for volutes and heels.

_________________
John Mayes
http://www.mayesluthier.com
Top
 Profile  
 
David Newton
PostPosted: Thu Jun 09, 2011 9:23 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Oct 30, 2007 9:13 am
Posts: 1167
Location: United States
State: Texas
Focus: Repair
Status: Professional
Thanks guys. [:Y:]
I'm glad you all didn't recommend the Auriou, they are pretty pricy.

You guys really are great, ya know. Wish we could meet for some face to face.

_________________
https://www.facebook.com/profile.php?id=100008907949110
Top
 Profile  
 
TonyFrancis
PostPosted: Fri Jun 10, 2011 8:16 am 
Offline
Koa
Koa

Joined: Mon Jul 02, 2007 1:22 pm
Posts: 766
Todd - Have you checked out these: http://www.lie-nielsen.com/catalog.php? ... rbePatRasp
Top
 Profile  
 
Colin North
PostPosted: Fri Jun 10, 2011 8:46 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5583
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
TonyFrancis wrote:
Todd - Have you checked out these: http://www.lie-nielsen.com/catalog.php? ... rbePatRasp

Excuse the intrusion, but I use the 10" 2nd cut cabinet rasp, bought it in UK, cost here now is about US$35 WITH handle, and that's pretty much what I think it's worth - a step up from cheap chinese imports.
Works, but nothing to get excited about, and certainly would not rank it alongside LN tools generally (I have an LN low angle jack plane)

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.
Top
 Profile  
 
JoeUlman
PostPosted: Fri Jun 10, 2011 1:15 pm 
Offline
Cocobolo
Cocobolo

Joined: Wed May 26, 2010 4:15 pm
Posts: 183
First name: Joe
Last Name: Ulman
City: Bellevue
State: Washington
Country: US
Focus: Build
I have the grain 10 Auriou 9-inch cabinet rasp which is plenty large and course enough for my needs in shaping necks but not too large/course for some smaller detail work. I really like the shape and the way it cuts. Maybe it’s a bit pricey but it’s a joy to use.

Attachment:
IMG_1916 copy.jpg


Joe


You do not have the required permissions to view the files attached to this post.

Top
 Profile  
 
TonyFrancis
PostPosted: Fri Jun 10, 2011 9:20 pm 
Offline
Koa
Koa

Joined: Mon Jul 02, 2007 1:22 pm
Posts: 766
Colin North wrote:
TonyFrancis wrote:
Todd - Have you checked out these: http://www.lie-nielsen.com/catalog.php? ... rbePatRasp

Excuse the intrusion, but I use the 10" 2nd cut cabinet rasp, bought it in UK, cost here now is about US$35 WITH handle, and that's pretty much what I think it's worth - a step up from cheap chinese imports.
Works, but nothing to get excited about, and certainly would not rank it alongside LN tools generally (I have an LN low angle jack plane)


Thanks Colin. Do you have a link to where we can buy them online?
Top
 Profile  
 
Colin North
PostPosted: Sun Jun 12, 2011 12:12 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5583
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
http://www.axminster.co.uk/vallorbe-vallorbe-swiss-rasps-prod19862/

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 13 posts ] 

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 14 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com