***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Wed Aug 13, 2025 12:09 pm


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 1 of 1
  [ 3 posts ] 
  Print view Previous topic | Next topic 
Author Message
segovia
PostPosted: Mon Sep 27, 2010 3:30 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Thu Aug 13, 2009 4:32 pm
Posts: 480
First name: John
Last Name: Charnock
Country: UK
Focus: Build
Status: Amateur
I bought the Stewmac profile for the mortise and tenon neck joint - their choice of bit is 12.7 mm Dia and 20.64 mm long - the nearest equivalent I can get from my preferred supplier of router bits is 12.7 in 19mm or 25.4 length - will the 19mm be sufficient depth ?

John
Top
 Profile  
 
superfly
PostPosted: Mon Sep 27, 2010 3:50 pm 
Offline
Walnut
Walnut

Joined: Thu Nov 08, 2007 10:43 pm
Posts: 24
Location: Netherlands
First name: Wim
Last Name: Seegers
City: Bussum
Country: Netherlands
Focus: Build
Status: Amateur
Hi John,
If the bit is not long enough you can always take an extra pass.
You better don't rout the full depth in one pass.
(I have an axminster 12 mm bit it works fine for tenons for me)

Regards
Wim

_________________
Check out the Dutch guitar buildersmeeting site at http://www.gitaarbouwersmeeting.org (sorry dutch only)
Top
 Profile  
 
segovia
PostPosted: Mon Sep 27, 2010 3:58 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Thu Aug 13, 2009 4:32 pm
Posts: 480
First name: John
Last Name: Charnock
Country: UK
Focus: Build
Status: Amateur
superfly wrote:
Hi John,
If the bit is not long enough you can always take an extra pass.
You better don't rout the full depth in one pass.
(I have an axminster 12 mm bit it works fine for tenons for me)

Regards
Wim


I was wondering about that, I also have the Jon Simpson neck jig - he cuts both in one pass on his video
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 3 posts ] 

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 10 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com