***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Tue Jul 29, 2025 11:08 am


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 1 of 1
  [ 3 posts ] 
  Print view Previous topic | Next topic 
Author Message
segovia
 Post subject: Fox Bender Modifications
PostPosted: Mon Jul 26, 2010 4:09 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Thu Aug 13, 2009 4:32 pm
Posts: 480
First name: John
Last Name: Charnock
Country: UK
Focus: Build
Status: Amateur
Hi

I made my fox bender from the LMI plans, it differs slightly as I had no intentions of using bulbs just a blanket. I also didn't include the bottom aluminum caul that is located at the bottom of the sandwich that slots into the mold.

I have decided to give it a remodel (re build) as I made a few mistakes along the way, my slots at the side are not parallel and the veneer clamp came loose. I know I can do a better job.

Are there any mods / improvements that worked for you on your set up I would like include them in my re design.

I am thinking of adding a third caul etc

Thanks in advance

J


You do not have the required permissions to view the files attached to this post.

Top
 Profile  
 
segovia
PostPosted: Mon Jul 26, 2010 4:24 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Thu Aug 13, 2009 4:32 pm
Posts: 480
First name: John
Last Name: Charnock
Country: UK
Focus: Build
Status: Amateur
Todd Stock wrote:
There are simplified plans available from Sylvan Welles Guitars - you'll pay for access to that part of his site, but it gets rid of all vestiges of the light bulbs and makes the side plates a lot simpler.

I don't use the adjustable shoe - a dedicated caul for each mold is less fussy and does a more consistent job...simple to make. Without the need to house three bulbs, the base can be made shorter so as to easily handle Size 5 and some tenor uke sides...I'd trim off at least an inch of length.



I have a paid up subscription to Sylvan's website - I'll take a look.

Thanks for the tip, this is just the sort of thing I am looking for.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 3 posts ] 

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 7 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com