Official Luthiers Forum! • View topic

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

truss rod question

Page 1 of 1

[ 2 posts ]

Print view

Previous topic | Next topic

Author

Message

Brad Goodman

Post subject: truss rod question

Posted: Tue Oct 06, 2009 1:13 pm

Brazilian Rosewood

Joined: Sun Feb 27, 2005 10:11 am
Posts: 2221

I am installing a truss rod (single acting LMI rod) in an acoustic guitar with the access from the soundhole. (I ussually have the access at the head)
I have only done this once before and I can't remember if I should have the adjusting nut even with the end of the neck,or continue it to the end of the headblock.

Thanks in advance,
Brad

Top

Jimmy Caldwell

Post subject: Re: truss rod question

Posted: Tue Oct 06, 2009 2:19 pm

Cocobolo

Joined: Mon Jan 03, 2005 7:06 am
Posts: 460
Location: United States

Brad,

IMO, it needs to extend at least to the end of the neckblock. It doesn't hurt if it sticks out a little further, you just need enough room between the UTB and the adjustment nut to get the wrench in. You can see in the attached pic that the truss rod end extends a little past the neckblock. It works fine.

Attachment:

P1010329.JPG

You do not have the required permissions to view the files attached to this post.

_________________
Jimmy Caldwell
http://www.caldwellguitars.com

Top

Page 1 of 1

[ 2 posts ]

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: doncaparker and 62 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: