Official Luthiers Forum! • View topic

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

12" disc sander

Page 1 of 1

[ 7 posts ]

Print view

Previous topic | Next topic

Author

Message

Laurent Brondel

Post subject: 12" disc sander

Posted: Sat Mar 28, 2009 7:02 am

Contributing Member

Joined: Wed Aug 31, 2005 7:30 am
Posts: 1792
Location: United States

I'm looking for a 12" aluminum or steel platter wich that can mounted on a 5/8" motor arbor, I can't seem to find any source although I've seen them. Any idea?

_________________
Laurent Brondel
West Paris, Maine - USA
http://www.laurentbrondel.com/

Top

Steve Marcq

Post subject: Re: 12" disc sander

Posted: Sat Mar 28, 2009 9:11 am

Cocobolo

Joined: Wed Sep 03, 2008 9:14 pm
Posts: 102
Location: Allenstown, NH
First name: Steve
Last Name: Marcq
City: Allenstown
State: NH
Zip/Postal Code: 03275
Country: USA
Focus: Build
Status: Amateur

Laurent, I believe I have one of those - 5/8" sounds like the diameter of my old (1950?) Shopsmith's arbor too. My dad used it as, well, a disc sander. I'll check when I'm in my shop in a bit. Maybe try the Shopsmith website?

Steve

Top

WaddyThomson

Post subject: Re: 12" disc sander

Posted: Sat Mar 28, 2009 9:13 am

Contributing Member

Joined: Mon Mar 19, 2007 7:05 am
Posts: 9191
Location: United States
First name: Waddy
Last Name: Thomson
City: Charlotte
State: NC
Focus: Build
Status: Semi-pro

Craftsman used to have one for their large 12", Radial Arm Saw. Don't know if they are still available.

_________________
Waddy

Photobucket Build Album Library

Sound Clips of most of my guitars

Top

ballbanjos

Post subject: Re: 12" disc sander

Posted: Sat Mar 28, 2009 10:28 am

Koa

Joined: Fri Jun 22, 2007 11:14 am
Posts: 1048
Location: Newland, North Carolina
First name: Dave
Last Name: Ball

Shopsmith sells a nice 12" steel disk. Here's a link:
http://www.shopsmith.com/ownersite/catalog/sn_sandingdisc.htm

Dave

Top

Howard Klepper

Post subject: Re: 12" disc sander

Posted: Sat Mar 28, 2009 11:44 am

Brazilian Rosewood

Joined: Tue Jan 25, 2005 6:16 am
Posts: 2692

Are you mounting to a table saw arbor, Laurent? I ask because the table is an essential part of a disc sander.

_________________
Howard Klepper
http://www.klepperguitars.com

When all else fails, clean the shop.

Top

Brook Moore

Post subject: Re: 12" disc sander

Posted: Sat Mar 28, 2009 12:37 pm

Cocobolo

Joined: Thu Mar 10, 2005 3:16 am
Posts: 140
Location: United States

Grizzly sells one as a repair part for a sander: http://www.grizzly.com/products/g7297/parts

Top

Laurent Brondel

Post subject: Re: 12" disc sander

Posted: Sat Mar 28, 2009 12:56 pm

Contributing Member

Joined: Wed Aug 31, 2005 7:30 am
Posts: 1792
Location: United States

Thanks for the replies guys, a used Shopsmith disk should be easy to find.
Howard, I have a couple of motors laying around and will make a slotted 90º table with ply, which will serve my purpose entirely.

_________________
Laurent Brondel
West Paris, Maine - USA
http://www.laurentbrondel.com/

Top

Page 1 of 1

[ 7 posts ]

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: DennisK and 13 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: