Official Luthiers Forum!

Actually I am looking for the proper specs the washer should be in a butt joint neck to body application. Don't want to pay LMI 10 bucks plus shipping for this stuff.

_________________
There is no difference between the man that thinks he can....and the man that thinks he cannot.

http://www.keybellevilles.com/stock.html

Item # K0637-A-032

_________________
JJ
Napa, CA
http://www.DonohueGuitars.com

Thanks JJ....I was digging around McMaster and found the following....

This application is for butt joint neck to body construction.

Part# 91255A545 Alloy Steel Button Head Socket Cap Screw 1/4"-20 Thread, 2" Length, Packs of 10

Part# 90192A121 HI-Strength Stl Knife-Thread Insert for Wood Hex Drive, 1/4"-20 Internal Thread, 19/32 Length

Part# 9712K63 High-Carbon Steel Belleville Disc Spring .255" ID, .500" OD, .025" Thick, Packs of 12

...I guess I could have pasted the links....

_________________
There is no difference between the man that thinks he can....and the man that thinks he cannot.