***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Fri Jul 18, 2025 4:23 pm


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 
  Print view Previous topic | Next topic 
Author Message
Ron M.
PostPosted: Fri Sep 26, 2008 2:56 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Thu Jan 31, 2008 12:31 am
Posts: 326
Location: New York City
First name: Ron
Last Name: Y
I've searched high and low, but this size chisel doesn't seems to be available. Does anyone know who has them? I want to use It for excavating the saddle slot in a bridge. Thanks for any leads.

Ron M.
Top
 Profile  
 
Frank Aarre
PostPosted: Fri Sep 26, 2008 3:03 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Mar 30, 2008 7:22 am
Posts: 207
Location: Norway
Status: Amateur
how about grinding one down?
3mm is at least readily available

_________________
Frank
Top
 Profile  
 
WaddyThomson
PostPosted: Fri Sep 26, 2008 3:26 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Mar 19, 2007 7:05 am
Posts: 9191
Location: United States
First name: Waddy
Last Name: Thomson
City: Charlotte
State: NC
Focus: Build
Status: Semi-pro
That's just over 2mm. 2mm chisels are available. I know LMI has them, but so does Highland Woodworking, and some others.

Hirsh 2mm Bevel Edge Chisel

_________________
Waddy

Photobucket Build Album Library

Sound Clips of most of my guitars
Top
 Profile  
 
TonyFrancis
PostPosted: Fri Sep 26, 2008 3:41 pm 
Offline
Koa
Koa

Joined: Mon Jul 02, 2007 1:22 pm
Posts: 766
-


Last edited by TonyFrancis on Mon Dec 02, 2013 10:03 pm, edited 1 time in total.

Top
 Profile  
 
Ron M.
PostPosted: Fri Sep 26, 2008 3:55 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Thu Jan 31, 2008 12:31 am
Posts: 326
Location: New York City
First name: Ron
Last Name: Y
frank777 wrote:
how about grinding one down?
3mm is at least readily available


Hi Frank,
I can't grind a 2mm chisel because I don't have a grinder (or the skill), but thanks just the same.

WaddyT wrote:
That's just over 2mm. 2mm chisels are available. I know LMI has them, but so does Highland Woodworking, and some others.

Hirsh 2mm Bevel Edge Chisel


I've seen the 2mm chisels all over the place. I guess i could make the saddle 1/8" since the 2mm size chisel is more readily available. Thanks Waddy.

Thanks,
Ron M.


Last edited by Ron M. on Fri Sep 26, 2008 3:56 pm, edited 1 time in total.

Top
 Profile  
 
WaddyThomson
PostPosted: Fri Sep 26, 2008 3:56 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Mar 19, 2007 7:05 am
Posts: 9191
Location: United States
First name: Waddy
Last Name: Thomson
City: Charlotte
State: NC
Focus: Build
Status: Semi-pro
Meaning that they are probably closer to 3/32 than 2mm?

_________________
Waddy

Photobucket Build Album Library

Sound Clips of most of my guitars
Top
 Profile  
 
Frank Aarre
PostPosted: Fri Sep 26, 2008 4:02 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Mar 30, 2008 7:22 am
Posts: 207
Location: Norway
Status: Amateur
1/8" - 3,175mm
3/32" - 2,38125mm

_________________
Frank
Top
 Profile  
 
Ron M.
PostPosted: Fri Sep 26, 2008 4:02 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Thu Jan 31, 2008 12:31 am
Posts: 326
Location: New York City
First name: Ron
Last Name: Y
WaddyT wrote:
Meaning that they are probably closer to 3/32 than 2mm?


Hi Waddy,
I'll go to toolsforworkingwood next week in Brooklyn, and check out some 2mm chisels.

Thanks,
Ron M.
Top
 Profile  
 
Ron M.
PostPosted: Fri Sep 26, 2008 4:56 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Thu Jan 31, 2008 12:31 am
Posts: 326
Location: New York City
First name: Ron
Last Name: Y
Thanks frank.
Top
 Profile  
 
Link Van Cleave
PostPosted: Fri Sep 26, 2008 7:44 pm 
Offline
Contributing Member
Contributing Member

Joined: Wed Mar 19, 2008 11:49 am
Posts: 897
Location: Northen Cal.
Ron, If you can "excavating the saddle slot in a bridge" you can take 1/32" off of a chisel.
All you need is a belt sander and some water. Get one of those cheap Marples blue handle 1/8" chisels (they are not bad chisels by the way ) and grind off the 1/32".
If you really can't grind one and can't find one let me know. I have some laying around that might be that size and if not I can grind them to that size. You might have to put a handle on it though.
Link

_________________
Cut to size.....Beat to fit.....Paint to match.
Top
 Profile  
 
Ron M.
PostPosted: Fri Sep 26, 2008 9:02 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Thu Jan 31, 2008 12:31 am
Posts: 326
Location: New York City
First name: Ron
Last Name: Y
Lvc wrote:
Ron, If you can "excavating the saddle slot in a bridge" you can take 1/32" off of a chisel.
All you need is a belt sander and some water. Get one of those cheap Marples blue handle 1/8" chisels (they are not bad chisels by the way ) and grind off the 1/32".
If you really can't grind one and can't find one let me know. I have some laying around that might be that size and if not I can grind them to that size. You might have to put a handle on it though.
Link


Thanks Lvc for the offer and the tips. I do have a Belt sander and I could order a 1/8" Marples, and I have some water laughing6-hehe.

ToddStock wrote:
The Pfeil 2mm #1 sweep (flat) single bevel chisel is usually available from Woodcraft or other Pfeil venders and is a nice tool for saddle slots. Also - my saddles are about 3" long (you had asked me at one time).


Hi Todd,
Actually, i was asking about the depth of the saddle (3/32" 1/8") but thanks for telling the length as well. Also, I'll look into the The Pfeil 2mm chisel.

Thanks,
Ron M.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 11 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com