Official Luthiers Forum! • View topic

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

Adi Pitch Solution

Page 1 of 1

[ 2 posts ]

Print view

Previous topic | Next topic

Author

Message

RaymundH

Post subject: Adi Pitch Solution

Posted: Thu Jan 21, 2010 10:46 am

Cocobolo

Joined: Tue Jan 29, 2008 9:43 am
Posts: 310
Location: N.B. Canada

I have an Adi top for an OM that is absolutely wonderful, however, it has a perforated pitch pocket in the lower bout. Very small and thin but noticable enough that I want to properly fill and will end up sunbursting.

Any thoughts on a proper fill job in this situation?

Ray

_________________
Guitar Building = Continuous Improvement Process

Top

Michael Dale Payne

Post subject: Re: Adi Pitch Solution

Posted: Thu Jan 21, 2010 10:51 am

Old Growth Brazilian

Joined: Tue Dec 28, 2004 1:56 am
Posts: 10707
Location: United States

if it is narrow you can do a tapered splint insert from edge drop from the same top.

Top

Page 1 of 1

[ 2 posts ]

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 44 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: