Official Luthiers Forum! • View topic

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

Solid color finishing

Page 1 of 1

[ 2 posts ]

Print view

Previous topic | Next topic

Author

Message

tommcloughlin

Post subject: Solid color finishing

Posted: Sun Oct 04, 2009 9:20 am

Walnut

Joined: Sat Oct 03, 2009 9:52 pm
Posts: 2
First name: Thomas
Last Name: McLoughlin
City: Brattleboro
State: Vermont
Zip/Postal Code: 05301
Country: United States
Focus: Build
Status: Amateur

I am building a dobro like guitar from a kit which uses birch plywood. I want to finish it solid black. I have some experience with spraying clear laquer but none with colors. My main concern is how to deal with keeping the color off the binding .

Top

jackwilliams

Post subject: Re: Solid color finishing

Posted: Sun Oct 04, 2009 9:34 am

Cocobolo

Joined: Tue Mar 10, 2009 7:11 pm
Posts: 333
First name: jack
Country: usa

If you are using plastic binding, you can spray over the binding and then scrape ( with a razor blade) clean, or you can mask off with good quality masking tape.If you are using wooden binding I'd suggest masking; Either way, you'll probably want to spray clear coats over the color coats after you remove the overspray or the tape.
regards,
jack

Top

Page 1 of 1

[ 2 posts ]

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: mikeyb2 and 34 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: