Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Oct 31, 2024 6:52 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 21 posts ] 
Author Message
PostPosted: Mon Jan 13, 2014 8:53 pm 
Offline
Walnut
Walnut

Joined: Mon Apr 25, 2011 12:44 pm
Posts: 36
First name: Joel
Last Name: Barbeau
City: Montreal
State: Quebec
Country: Canada
Hi everyone, like the title says, this is my sixth guitar. It's a classical guitar (my third one) taking inspiration from Daniel Friederich, John S. Bogdanovich and Trevor Gore (I'm talking about the construction methods here. Aesthetically it's a melting pot of everything I like about every guitar I've ever seen, I guess) Here's the basic decription : Laminated sides and linings, four mahogany back braces, neck and body built separately, cedar top and Indian Rosewood back and sides.

It will be the same shape as this one (my second classical, that I built using some of José Romanillos' designs and construction techniques)
Image


I'm going for a minimalist/efficient look, and I still haven't decided if I'm going for an elevated neck or not. I haven't seen a lot of info on how to do that.

Here's the rosette made of amboyna and eucalyptus burl :
Image

One of the bracing system Daniel Friederich uses (a lot of fitting is involved, very fun to do, but I might not do that again)
Image

The different parts of the guitar, before glueing the top
Image
The inlay on the head is amboyna burl, same piece as the rosette.

Next step : The bindings! Thanks for looking.

_________________
Not much but at least it exists : http://jbluthier.com/


Top
 Profile  
 
PostPosted: Tue Jan 14, 2014 3:03 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2004 9:42 pm
Posts: 4217
Location: Buffalo, NY
First name: Robert
Last Name: Cefalu
City: Buffalo
State: NY
Zip/Postal Code: 14217
Country: US
Beautiful work Joel [:Y:]

_________________
Beautiful and unusual tone woods at a reasonable price.
http://www.rctonewoods.com/RCT_Store
The Zootman
1109 Military Rd.
Kenmore, NY 14217
(716) 874-1498


Top
 Profile  
 
PostPosted: Tue Jan 14, 2014 8:27 am 
Offline
Koa
Koa
User avatar

Joined: Mon Sep 11, 2006 3:56 am
Posts: 855
Location: United States
Beautiful - inside and out!

Max

_________________
Max Bishop
Brighton, Michigan


Top
 Profile  
 
PostPosted: Tue Jan 14, 2014 8:58 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Aug 23, 2010 11:42 pm
Posts: 1702
First name: John
Last Name: Parchem
City: Seattle
State: Wa
Zip/Postal Code: 98177
Country: USA
Focus: Build
Status: Amateur
Looking good. I love the rosette.

_________________
http://www.Harvestmoonguitars.com


Top
 Profile  
 
PostPosted: Tue Jan 14, 2014 10:15 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Jan 03, 2009 6:24 pm
Posts: 314
First name: EddieLee
Last Name: Brown
Really nice. Great rosette!

_________________
_____________

EddieLee


Top
 Profile  
 
PostPosted: Tue Jan 14, 2014 11:48 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Jan 13, 2010 12:46 am
Posts: 1247
First name: Beth
Last Name: Mayer
City: Tucson
State: AZ
Country: United States
Focus: Build
Status: Amateur
Gorgeous. Pristine work! [clap]


Top
 Profile  
 
PostPosted: Wed Jan 15, 2014 3:48 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Mar 19, 2007 7:05 am
Posts: 9191
Location: United States
First name: Waddy
Last Name: Thomson
City: Charlotte
State: NC
Focus: Build
Status: Semi-pro
Really a fine looking instrument!

_________________
Waddy

Photobucket Build Album Library

Sound Clips of most of my guitars


Top
 Profile  
 
PostPosted: Wed Jan 15, 2014 9:31 pm 
Offline
Walnut
Walnut

Joined: Mon Apr 25, 2011 12:44 pm
Posts: 36
First name: Joel
Last Name: Barbeau
City: Montreal
State: Quebec
Country: Canada
Thanks for the kind words everyone!

Here's what I did yesterday :
Image

This is the third guitar I've done with the binding jig from Canadian Luthier Supply and it gets easier everytime, and setting it up takes about two minutes, really.

And here's what I just did :
Image

One of the first thing I learned when I started this build :
Image
Protect the cedar top at all cost! (This is my first guitar using cedar)

Tomorrow I'll be binding the top, and hopefully I'll have some pictures of how it all looks (nothing fancy, really)

_________________
Not much but at least it exists : http://jbluthier.com/


Top
 Profile  
 
PostPosted: Sun Jan 19, 2014 9:02 pm 
Offline
Walnut
Walnut

Joined: Mon Apr 25, 2011 12:44 pm
Posts: 36
First name: Joel
Last Name: Barbeau
City: Montreal
State: Quebec
Country: Canada
This morning I got the bindings done and levelled, the butt inlay was fitted after the bindings, I forgot to take pictures of the process so here's the result :
Image
I used the offcut from the side, so it is the piece of rosewood that would have been there anyway.

And here's how the whole thing looks from the front :
Image

Next up is the rest of the neck (still haven't done the fretboard) , the mortice for the neck joint, the bridge and then finish which will most likely be french polish.

_________________
Not much but at least it exists : http://jbluthier.com/


Top
 Profile  
 
PostPosted: Sun Jan 19, 2014 9:18 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Dec 30, 2012 10:04 pm
Posts: 712
First name: Doug
Last Name: Balzer
City: Calgary
State: Alberta
Country: Canada
Focus: Build
Status: Semi-pro
Your work is inspiring me Joel.

_________________
Doug

Don't let fear or common sense stop you from trying to build something


Top
 Profile  
 
PostPosted: Fri Jan 24, 2014 6:50 pm 
Offline
Walnut
Walnut

Joined: Mon Apr 25, 2011 12:44 pm
Posts: 36
First name: Joel
Last Name: Barbeau
City: Montreal
State: Quebec
Country: Canada
Thanks Doug! I try to make things as neat as I can :D

Here's how I glue my fingerboards (1'' thick plexiglass offcut I get from my job, more than I could ever possibly use, and they consider it scrap!)

Image

And I decided to go with a 12-hole bridge. Next time I use a mosaic on the tie block I might do 18-holes again to show it off like I did on my last one, but this one's looks won't suffer from having strings pass over it.

Image

I'll be posting more pictures this weekend as I might start carving the neck, or fitting the neck on the body, whichever I feel like doing most.

_________________
Not much but at least it exists : http://jbluthier.com/


Top
 Profile  
 
PostPosted: Sat Jan 25, 2014 7:01 pm 
Offline
Walnut
Walnut

Joined: Mon Apr 25, 2011 12:44 pm
Posts: 36
First name: Joel
Last Name: Barbeau
City: Montreal
State: Quebec
Country: Canada
Thought I'd post a bit more on how I do the stuff rather than just showing the results :

Here's my set-up for drilling holes in a straight line, like tuner holes or string holes on bridges
Image
The board is bolted to the drill press table, and the fence is adjustable. All you need to do is align the first and last holes in a line and the rest will follow.
To drill the secondary holes in the bridge all you have to do it to add a shim to the front of the vise the width of the offset you want between the two rows of holes.

And here's how I do the mortise in the body :

Image

The sides and the upper bout lay flat on the surface of the board with all the center lines aligned. I took the idea from Contemporary Guitar Design and Build.
It's also where I got the idea to make my own 'router table', pretty simple but effective.

I usually also use the router table to do the tenon on the neck too, but I decided to do an elevated neck on this one after all, so it's a bit more complicated than usual. I had to do it by hand. Tomorrow I'll make it fit properly and then carve the neck.
Image

_________________
Not much but at least it exists : http://jbluthier.com/


Top
 Profile  
 
PostPosted: Mon Feb 10, 2014 6:24 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Jan 13, 2010 12:46 am
Posts: 1247
First name: Beth
Last Name: Mayer
City: Tucson
State: AZ
Country: United States
Focus: Build
Status: Amateur
Really like seeing the set-ups for various processes. You are doing amazing work!


Top
 Profile  
 
PostPosted: Mon Feb 10, 2014 10:39 pm 
Offline
Cocobolo
Cocobolo

Joined: Mon Jun 07, 2010 11:14 am
Posts: 109
First name: Jan-Alexis
Last Name: Tremblay
City: Montreal
Country: Canada
Focus: Build
Status: Amateur
Superbe!


Top
 Profile  
 
PostPosted: Thu Mar 20, 2014 3:25 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5484
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
Top job on no.6. [:Y:]

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.


Top
 Profile  
 
PostPosted: Thu Mar 20, 2014 5:09 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Aug 23, 2010 11:42 pm
Posts: 1702
First name: John
Last Name: Parchem
City: Seattle
State: Wa
Zip/Postal Code: 98177
Country: USA
Focus: Build
Status: Amateur
Nice work. I am very interested in an elevated fret board. I will be watching with interest.

_________________
http://www.Harvestmoonguitars.com


Top
 Profile  
 
PostPosted: Mon Jul 28, 2014 9:13 am 
Offline
Walnut
Walnut

Joined: Mon Apr 25, 2011 12:44 pm
Posts: 36
First name: Joel
Last Name: Barbeau
City: Montreal
State: Quebec
Country: Canada
Well this one sort of fell through the cracks...
But now it's done and it sounds pretty good, maybe I could have left the top a little thicker though.
Separation of notes and projection is very good, all in all I'm very happy with it.

Image
Image

I moved to another shop in April and started another guitar around mid-April, and finished it around 3 weeks ago.
Something a little different :
Maple all around
Image
Image
Image

Bolt-on bolt-off neck joint, à la Gore-Gilet
Image
This one is number 7. Number 8 and 9 are on their way, laminating the sides today. One OM and a parlor in walnut.

Thanks for having a look!

_________________
Not much but at least it exists : http://jbluthier.com/


Top
 Profile  
 
PostPosted: Tue Jul 29, 2014 5:58 am 
Offline
Koa
Koa
User avatar

Joined: Mon Sep 11, 2006 3:56 am
Posts: 855
Location: United States
I'm looking forward to seeing more of your great work.

Best wishes,
Max

_________________
Max Bishop
Brighton, Michigan


Top
 Profile  
 
PostPosted: Wed Jul 30, 2014 12:46 am 
Offline
Contributing Member
Contributing Member

Joined: Sun Jun 23, 2013 11:35 pm
Posts: 43
First name: Murray
Last Name: Hunt
City: Whistler
State: BC
Zip/Postal Code: V0N 1B1
Country: Canada
Focus: Build
Status: Amateur
Man that maple guitar is just gorgeous!

Thanks for sharing, really interesting to see your builds.


Top
 Profile  
 
PostPosted: Fri Aug 08, 2014 3:29 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Apr 16, 2012 12:47 pm
Posts: 2513
First name: Jay
Last Name: De Rocher
City: Bothell
State: Washington
Those are beautiful guitars. I'm wondering how you get such tight, precise wood-to-wood seams between the three wood rings in your rosettes.

_________________
Once in a while you get shown the light in the strangest of places if you look at it right - Robert Hunter


Top
 Profile  
 
PostPosted: Sat Aug 09, 2014 10:21 am 
Offline
Walnut
Walnut

Joined: Mon Apr 25, 2011 12:44 pm
Posts: 36
First name: Joel
Last Name: Barbeau
City: Montreal
State: Quebec
Country: Canada
Thank you for the kind words everyone, it's very encouraging!

J De Rocher wrote:
Those are beautiful guitars. I'm wondering how you get such tight, precise wood-to-wood seams between the three wood rings in your rosettes.


Careful measurement, and scoring the wood with a circle cutter before taking the router to it (I use the LMI circle-cutter, although I'm thinking about making my own out of clear plexiglas, I don't like not seeing the blade when I'm cutting).

I don't have big enough pieces of burl to cut a slice and make rings out of that, I have to cut small 1'' wide pieces and fit them around in a circle (I have to make 3 of them), and then route the different rings out of those.

Then I assemble the whole thing around a plexiglas circle of the right diameter with hot hide glue and a piece of waxed string going around it to keep the black veneer on the outside in place. Clean up a little, and then glue it in the soundboard with hot hide glue.

I had debated whether or not to put a veneer between the two different burls, then decided I liked the blurry transition between the Eucalyptus and Amboyna burl. It looks well defined from afar, then you get closer and it gets blurry. And then you look real close and it gets well defined again, it keeps it interesting, I like that.

_________________
Not much but at least it exists : http://jbluthier.com/



These users thanked the author Joel Barbeau for the post: J De Rocher (Sat Aug 09, 2014 1:58 pm)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 21 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com