Official Luthiers Forum! • View topic

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

Making Purfling

Page 1 of 1

[ 9 posts ]

Print view

Previous topic | Next topic

Author

Message

EddieLee

Post subject: Making Purfling

Posted: Tue Oct 08, 2013 3:44 pm

Contributing Member

Joined: Sat Jan 03, 2009 6:24 pm
Posts: 314
First name: EddieLee
Last Name: Brown

This is my first try at making (at least in part) purfling. I have a 55 mil strip of cherry and I want to glue a piece of 20 mil thick BW purfling to side. What is the best way to do that?

I am leaning toward using CA. If I use CA will it still bend ok in a bender with a heat blanket?

_________________
_____________

EddieLee

Top

Tim McKnight

Post subject: Re: Making Purfling

Posted: Tue Oct 08, 2013 4:07 pm

Contributing Member

Joined: Tue Jan 04, 2005 1:43 am
Posts: 1533
Location: Morral, OH

Titebond III works well.

_________________
tim...
http://www.mcknightguitars.com

Top

Bryan Bear

Post subject: Re: Making Purfling

Posted: Tue Oct 08, 2013 4:29 pm

Brazilian Rosewood

Joined: Thu Feb 12, 2009 12:12 pm
Posts: 3308
First name: Bryan
Last Name: Bear
City: St. Louis
State: Mo
Country: USA
Focus: Build
Status: Amateur

+1 on titebond III. I have bent split side pieces glued with CA, the glue held okay but the fumes were very irritating while bending.

_________________
Bryan Bear PMoMC

Take care of your feet, and your feet will take care of you.

Top

TonyKarol

Post subject: Re: Making Purfling

Posted: Tue Oct 08, 2013 5:29 pm

Contributing Member

Joined: Fri Sep 09, 2005 7:51 am
Posts: 3786
Location: Canada

titebond original is fine too .. all I use except fish glue on coco ...

_________________
Tony Karol
www.karol-guitars.com
"let my passion .. fulfill yours"

Top

EddieLee

Post subject: Re: Making Purfling

Posted: Wed Oct 09, 2013 3:52 pm

Contributing Member

Joined: Sat Jan 03, 2009 6:24 pm
Posts: 314
First name: EddieLee
Last Name: Brown

Thanks, but if you use titebond, how do you clamp up any thing that small. My thought is to assemble the cherry strip and the 2 BW strips and then bend it. That way I will have only the binding and 2 pieces of purfling to deal with when I bind the guitar. If I do not per-assemble it, I will have the binding plus 5 pieces of purfling flopping around during binding. That seem like a nightmare.

_________________
_____________

EddieLee

Top

Christophe Mineau

Post subject: Re: Making Purfling

Posted: Wed Oct 09, 2013 4:01 pm

Walnut

Joined: Tue Aug 27, 2013 7:55 am
Posts: 19
First name: Christophe
Last Name: Mineau
City: Louannec
State: Brittany
Zip/Postal Code: 22700
Country: France
Focus: Build
Status: Amateur

Hi,
Have a look at this setup :
http://www.grellier.fr/article.php?id=6&lang=en
maybe it could help ?

_________________
Christophe Mineau
Let's make chips ! - http://www.labellenote.fr

Top

EddieLee

Post subject: Re: Making Purfling

Posted: Wed Oct 09, 2013 4:47 pm

Contributing Member

Joined: Sat Jan 03, 2009 6:24 pm
Posts: 314
First name: EddieLee
Last Name: Brown

Thanks Chrisrophe. I think I could make something like that work.

_________________
_____________

EddieLee

Top

Doug Balzer

Post subject: Re: Making Purfling

Posted: Wed Oct 09, 2013 9:50 pm

Contributing Member

Joined: Sun Dec 30, 2012 10:04 pm
Posts: 712
First name: Doug
Last Name: Balzer
City: Calgary
State: Alberta
Country: Canada
Focus: Build
Status: Semi-pro

This thread is helpful to me as well. Any other approaches to glueing the purfling to the binding prior to bending?

_________________
Doug

Don't let fear or common sense stop you from trying to build something

Top

SteveSmith

Post subject: Re: Making Purfling

Posted: Thu Oct 10, 2013 6:56 am

Contributing Member

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7472
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair

One way is to laminate a board of whatever height you want your binding and at least 3" wide with a layer of veneer then slice off pieces of appropriate width. That way I get enough for several guitars. I use fish glue.

Here's one with the single layer of veneer.

Attachment:

DSC00058.JPG

Edit: I should have read the original post closer - this won't help if you're trying to do narrow strips.

You do not have the required permissions to view the files attached to this post.

_________________
Steve Smith
"Music is what feelings sound like"

Top

Page 1 of 1

[ 9 posts ]

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 35 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: