Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Oct 31, 2024 6:23 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 10 posts ] 
Author Message
 Post subject: Lee Nunes #2
PostPosted: Wed Apr 03, 2013 2:55 pm 
Offline
Walnut
Walnut
User avatar

Joined: Thu Jun 18, 2009 6:43 am
Posts: 14
First name: Lee
Last Name: Nunes
City: Fall River
State: MA
Zip/Postal Code: 02721
Country: USA
Focus: Build
Status: Amateur
I know I'm starting a few months late, but I hope I can finish in time. This will be my 2nd guitar. (Technically, I built half a guitar in my friend's shop as my first, but since it's more of a drum at this point, I won't count it.) I finished my first guitar last November. I didn't have much woodworking experience, and I messed up every step of the process, but somehow I managed to fix or disguise most of my blunders and make a guitar that I actually like! Since I haven't done much on this guitar yet, I'll post some pics of my first build. I'll probably stick to the same basic design, but with different wood, and hopefully, fewer mistakes.


You do not have the required permissions to view the files attached to this post.

_________________
https://www.facebook.com/lee.nunes.35


Top
 Profile  
 
 Post subject: Re: Lee Nunes #2
PostPosted: Wed Apr 03, 2013 2:57 pm 
Offline
Walnut
Walnut
User avatar

Joined: Thu Jun 18, 2009 6:43 am
Posts: 14
First name: Lee
Last Name: Nunes
City: Fall River
State: MA
Zip/Postal Code: 02721
Country: USA
Focus: Build
Status: Amateur
Redwood/E.I. Rosewood and about 20 other woods.


You do not have the required permissions to view the files attached to this post.

_________________
https://www.facebook.com/lee.nunes.35


Top
 Profile  
 
 Post subject: Re: Lee Nunes #2
PostPosted: Wed Apr 03, 2013 3:06 pm 
Offline
Walnut
Walnut
User avatar

Joined: Thu Jun 18, 2009 6:43 am
Posts: 14
First name: Lee
Last Name: Nunes
City: Fall River
State: MA
Zip/Postal Code: 02721
Country: USA
Focus: Build
Status: Amateur
The sunburst neck was a last minute decision, because I botched the heel carving really badly, and needed to plane it down and glue some extra mahogany wings to the heel. I wasn't planning to do a burst, but I needed to hide the glue joint. I French Polished everything except the neck. I used a $10 Harbor Freight airbrush and added black powdered dye to the shellac I used for the rest of the guitar. I've never done any finishing before, and I didn't have any spray equipment, so French Polishing seemed like a decent option. I knew it would be labor-intensive, but had no idea just how out of shape I really was until I tried it!


You do not have the required permissions to view the files attached to this post.

_________________
https://www.facebook.com/lee.nunes.35


Top
 Profile  
 
 Post subject: Re: Lee Nunes #2
PostPosted: Wed Apr 03, 2013 3:08 pm 
Offline
Contributing Member
Contributing Member

Joined: Mon Dec 27, 2004 11:25 pm
Posts: 7202
Location: United States
Lee my friend, you are *not* a great photographer, but I know that this is a nice guitar! Can't wait to see what you do for #2.

_________________
"I want to know what kind of pickups Vince Gill uses in his Tele, because if I had those, as good of a player as I am, I'm sure I could make it sound like that.
Only badly."


Top
 Profile  
 
 Post subject: Re: Lee Nunes #2
PostPosted: Wed Apr 03, 2013 3:13 pm 
Offline
Walnut
Walnut
User avatar

Joined: Thu Jun 18, 2009 6:43 am
Posts: 14
First name: Lee
Last Name: Nunes
City: Fall River
State: MA
Zip/Postal Code: 02721
Country: USA
Focus: Build
Status: Amateur
Thanks Don. I agree wholeheartedly! I should probably invest in a camera that doesn't make phone calls.


Here's a little video sample of my friend Ken playing it. It's a little out of tune, and was recorded on my phone (see above), but you can tell that it kinda sounds like a guitar.


_________________
https://www.facebook.com/lee.nunes.35


Top
 Profile  
 
 Post subject: Re: Lee Nunes #2
PostPosted: Wed Apr 03, 2013 8:53 pm 
Offline
Mahogany
Mahogany

Joined: Tue Sep 21, 2010 2:13 pm
Posts: 51
First name: John
Last Name: Smith
Focus: Build
Status: Amateur
I really like the binding, headstock and rosette, congrats!


Top
 Profile  
 
 Post subject: Re: Lee Nunes #2
PostPosted: Thu Apr 04, 2013 3:35 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Jun 10, 2012 10:04 am
Posts: 773
First name: Peter
Last Name: Fenske
City: Leeds
State: Yorkshire
Country: Uk
Focus: Build
Status: Amateur
Really nice first guitar. Can't wait to see your second! [:Y:]

_________________
"I am always doing that which I cannot do, in order that I may learn how to do it."
Pablo Picasso

https://www.facebook.com/FenskeGuitars


Top
 Profile  
 
 Post subject: Re: Lee Nunes #2
PostPosted: Thu Apr 04, 2013 12:53 pm 
Offline
Walnut
Walnut
User avatar

Joined: Thu Jun 18, 2009 6:43 am
Posts: 14
First name: Lee
Last Name: Nunes
City: Fall River
State: MA
Zip/Postal Code: 02721
Country: USA
Focus: Build
Status: Amateur
Thanks, Peter and Mad Raxz. I'm anxious to hear it as well. The binding on the last one gave me some issues. I cut them from a piece of Cocobolo that I had. I don't know if it was the oil in the wood or a bad job of chiseling out the binding channel (fun!), but I had a really hard time getting the glue to hold without gaps.

_________________
https://www.facebook.com/lee.nunes.35


Top
 Profile  
 
 Post subject: Re: Lee Nunes #2
PostPosted: Thu Apr 04, 2013 1:25 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Dec 21, 2012 11:52 am
Posts: 1388
First name: Zeke
Last Name: McKee
City: Goodlettsville
State: TN
Zip/Postal Code: 37070
Country: United States
Focus: Build
Status: Amateur
Looking forward to seeing you work. That first guitar is impressive.


Top
 Profile  
 
 Post subject: Re: Lee Nunes #2
PostPosted: Wed Apr 10, 2013 9:11 am 
Offline
Walnut
Walnut
User avatar

Joined: Thu Jun 18, 2009 6:43 am
Posts: 14
First name: Lee
Last Name: Nunes
City: Fall River
State: MA
Zip/Postal Code: 02721
Country: USA
Focus: Build
Status: Amateur
I've got some catching up to do, but I'm making progress. I have a couple of spots in the rosette that need fixing, but I like it so far.


You do not have the required permissions to view the files attached to this post.

_________________
https://www.facebook.com/lee.nunes.35


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com