Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Mon Mar 18, 2024 9:51 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: Arm Rest installation
PostPosted: Wed May 12, 2021 12:10 pm 
Offline
Walnut
Walnut

Joined: Sun May 09, 2021 11:59 pm
Posts: 13
First name: Steve
Last Name: Stroot
City: Chiloquin
State: Oregon
Zip/Postal Code: 97624
Country: USA
Focus: Build
Status: Amateur
I'm a brand new OLF member seeking your sage advice and counsel. I purchased an arm rest for a dreadnaught guitar on eBay. The arm rest came with a 1/4 inch strip of cork along the top edge. My idea was to use silicone to bond the cork to the edge of the guitar. But, I watched a YouTube video on arm rest installation and the luthier(?) recommended using "double backed tape" to enable the arm rest to be removed without damaging the guitar's finish. Also, the arm rest in the video did not appear to have cork or other material attached to the arm rest. My question: What do you recommend I use to attach the arm rest? Should I leave the cork on or scrape it off? Any other thoughts? Thanks in advance for your kind assistance.


Top
 Profile  
 
PostPosted: Wed May 12, 2021 12:47 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Feb 12, 2009 12:12 pm
Posts: 3290
First name: Bryan
Last Name: Bear
City: St. Louis
State: Mo
Country: USA
Focus: Build
Status: Amateur
Don't use silicone. Double stick tape is the way to go. You want to be able to remove this later without damaging the finish or making a mess. double stick tape will allow for that. I'm sure someone will stop by with a recommended tape. Obviously you don't want something like two sided scotch tape and I wouldn't use the foam stuff either (if it were me). I'm blanking on exactly what to call the type you want.

I'm not sure about the cork. from your description, I think the armrest has a 90 degree bend so it can touch the sides and the top and that the surface that would bear on the top has cork on it. Do I have that right? I think I would just use the tape on the sides. I would think that would hold well enough and make removal much easier as well. I'd just leave the cork.

_________________
Bryan Bear PMoMC

Take care of your feet, and your feet will take care of you.


Top
 Profile  
 
PostPosted: Wed May 12, 2021 1:55 pm 
Offline
Walnut
Walnut

Joined: Sun May 09, 2021 11:59 pm
Posts: 13
First name: Steve
Last Name: Stroot
City: Chiloquin
State: Oregon
Zip/Postal Code: 97624
Country: USA
Focus: Build
Status: Amateur
Bryan:

You have it right. The arm rest has a raised area along the curve that rests at the edge of the guitar. The remaining inside surface of the arm rest is recessed about 1/4 inch so it doesn't contact the guitar top. If I understand your advice, you're suggesting I use double backed tape to secure each end of the arm rest and allow the cork to remain touching but unattached to the edge of the guitar. I hope I've got that right. I'm curious to know if anyone can recommend a particular brand of tape that would be advisable in this situation.
Thanks.


Top
 Profile  
 
PostPosted: Wed May 12, 2021 2:00 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7233
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
Use the double-stick tape. When it’s time to remove it a bit of Naptha will dissolve the adhesive on the tape without hurting the finish on the guitar.


Sent from my iPhone using Tapatalk Pro

_________________
Steve Smith
"Music is what feelings sound like"


Top
 Profile  
 
PostPosted: Wed May 12, 2021 2:55 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Feb 12, 2009 12:12 pm
Posts: 3290
First name: Bryan
Last Name: Bear
City: St. Louis
State: Mo
Country: USA
Focus: Build
Status: Amateur
https://www.lowes.com/pd/Shurtape-1-88- ... pe/3407976

I'm pretty sure this is the tape I bought last time I needed some. The roll is almost empty so it has been a while. I probably got it at Lowes also.

_________________
Bryan Bear PMoMC

Take care of your feet, and your feet will take care of you.


Top
 Profile  
 
PostPosted: Wed May 12, 2021 9:57 pm 
Offline
Walnut
Walnut

Joined: Sun May 09, 2021 11:59 pm
Posts: 13
First name: Steve
Last Name: Stroot
City: Chiloquin
State: Oregon
Zip/Postal Code: 97624
Country: USA
Focus: Build
Status: Amateur
I figured the forum members collectively knew everything there is to know and I was right! You've solved my problem. Thanks, guys!


Top
 Profile  
 
PostPosted: Fri May 14, 2021 5:05 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sat Nov 19, 2005 10:54 am
Posts: 378
Location: Between Bordeaux and the Atlantic. S.W.France
I'd use this, if it's available where you are.

https://www.findtape.com/tesa-4939-Pape ... Tape/p991/


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com