This is a 20" scale. D and G are octave pairs. B and E are unison pairs.
| Official Luthiers Forum! https://www.luthiersforum.com/forum/ |
|
| 8 string baritone https://www.luthiersforum.com/forum/viewtopic.php?f=10128&t=54082 |
Page 1 of 1 |
| Author: | bcombs510 [ Mon Apr 05, 2021 8:40 am ] |
| Post subject: | 8 string baritone |
Hello, Has anyone here built an 8 string baritone? In researching I see scale lengths from 19" to 21.25" for baritone. There will be two wound strings so would it need to be the longer scale length? Kala measurements for their now discontinued 8 string show: Scale Length: 20.25 inches, Overall Instrument Length: 31.5 inches, Body Length: 14 inches, Number of frets: 19, Width at upper bout: 7.75 inches, Width at lower bout: 10.25 inches, Width at waist: 6.625 inches, Body Depth: 3.288 inches, Fingerboard width at nut: 1.497 inches, Fingerboard width at neck/body joint: 1.87 inches If you have built one I'd love to hear how it turned out. Brad |
|
| Author: | Chris Pile [ Mon Apr 05, 2021 10:17 am ] |
| Post subject: | Re: 8 string baritone |
You mean ukulele? |
|
| Author: | bcombs510 [ Mon Apr 05, 2021 11:08 am ] |
| Post subject: | Re: 8 string baritone |
Chris Pile wrote: You mean ukulele? Doh, sorry... yes! An 8 string baritone uke. |
|
| Author: | saltytri [ Tue Apr 06, 2021 9:46 pm ] |
| Post subject: | Re: 8 string baritone |
This is a 20" scale. D and G are octave pairs. B and E are unison pairs.
|
|
| Author: | bcombs510 [ Wed Apr 07, 2021 1:18 pm ] |
| Post subject: | Re: 8 string baritone |
Thanks, David. It looks like the saddle on this one is straight. Is that correct? Any issues with intonating the wound DG? |
|
| Author: | saltytri [ Thu Apr 08, 2021 9:41 am ] |
| Post subject: | Re: 8 string baritone |
Yes, the saddle is straight across, as this has proven over time to work out well on my baritones. I don't recall any problems with intonation and the owner, who is a very experienced musician, has said that he is happy with it. The low D string is a TI CF35 and the low G is a TI CF30. The fluorocarbons are .025, .0235, .029 and .022. These were all from a supplier who is no longer with us. Following is part of an email that I sent to the owner. I don't know if the Oasis sizes are current but those sizes ought to be a reasonable starting place: I saved some notes on the strings since it is a little unusual: Strings on the instrument as shipped: D3 - TI CF35 D4 - .025 G3 - TI CF30 G4 - .023 B3 x 2 - .029 E4 x 2 - .022 The fluorocarbons can be taken from these two sets: Oasis 8000 fluorocarbon uke set: .215 .023 .027 .030 Oasis 8100 fluorocarbon uke set: .023 .025 .027 .030 |
|
| Author: | bcombs510 [ Thu Apr 08, 2021 6:03 pm ] |
| Post subject: | Re: 8 string baritone |
Extremely helpful. Thank you, David. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|