***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Jun 06, 2024 2:20 am


Board index » CNC and Lutherie

All times are UTC - 5 hours





Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 
  Print view Previous topic | Next topic 
Author Message
BobK
PostPosted: Fri Apr 23, 2010 9:01 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Jul 02, 2006 2:57 am
Posts: 449
Location: United States
I've been struggling with a carved top model for a while and had a breakthrough this week. The contours aren't nearly as elegant as a PRS, but I'm going to give it a go with some mdf this weekend. Anyone know where I can find dimensions for a single coil pick up and a tremolo cavity?

Thanks for looking,

Bob
Attachment:
electric body profile.JPG

Attachment:
electric back.JPG


You do not have the required permissions to view the files attached to this post.

Top
 Profile  
 
Mike Kroening
PostPosted: Sat Apr 24, 2010 2:50 am 
Offline
Cocobolo
Cocobolo

Joined: Tue Mar 04, 2008 10:55 pm
Posts: 404
Location: Dallas, Texas
What type of tremolo?

_________________
I'm outside looking in, just farther from the window than most.
Top
 Profile  
 
BobK
PostPosted: Sat Apr 24, 2010 8:06 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Jul 02, 2006 2:57 am
Posts: 449
Location: United States
Ahh, that would help. Haven't decided between Wilkinson D18 http://store.guitarfetish.com/wistsatrfial.html and VS100n http://www.stewmac.com/shop/Bridges,_tailpieces/Electric_guitar_tremolos/Wilkinson_Gotoh_VS-100N_Tremolo.html

Bob
Top
 Profile  
 
Mike Kroening
PostPosted: Sun Apr 25, 2010 10:32 am 
Offline
Cocobolo
Cocobolo

Joined: Tue Mar 04, 2008 10:55 pm
Posts: 404
Location: Dallas, Texas
Hi Bob,
I've sent you a PM. I'm currently having problems with my FTP account on my website so I can't upload a file for you so I will need to email it to you.

Mike

_________________
I'm outside looking in, just farther from the window than most.
Top
 Profile  
 
BobK
PostPosted: Sat May 08, 2010 6:17 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Jul 02, 2006 2:57 am
Posts: 449
Location: United States
Decided to redraw this as a set neck. I added a foot for additional glue surface for the neck joint. I figured a pocket extending 1.5" into the body should provide enough strength. Also played with the top a little more. Hoping to run a test cut tomorrow.

Attachment:
set neck 1.JPG

Attachment:
set neck 2.JPG


You do not have the required permissions to view the files attached to this post.

Top
 Profile  
 
Parser
PostPosted: Sun May 09, 2010 7:26 am 
Offline
Koa
Koa
User avatar

Joined: Tue Nov 28, 2006 1:44 pm
Posts: 1105
Location: Crownsville, MD
First name: Trevor
Last Name: Lewis
City: Crownsville
State: MD
Zip/Postal Code: 21032
Country: USA
Focus: Build
Status: Semi-pro
Hey Bob, it looks like it is coming along nicely...!

You might want to take a look at the heel of the neck though, it looks like it could stand to be elongated a bit...

Trev

_________________
http://www.PeakeGuitars.com
Top
 Profile  
 
BobK
PostPosted: Sun May 09, 2010 1:08 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Jul 02, 2006 2:57 am
Posts: 449
Location: United States
Thanks for the input Trev. I was hoping to keep the surface between the fretboard and pickup, but it looks like I'll have to rethink...
Top
 Profile  
 
Parser
PostPosted: Sun May 09, 2010 5:40 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Nov 28, 2006 1:44 pm
Posts: 1105
Location: Crownsville, MD
First name: Trevor
Last Name: Lewis
City: Crownsville
State: MD
Zip/Postal Code: 21032
Country: USA
Focus: Build
Status: Semi-pro
The top carve looks pretty cool & that's one of the hardest things to do. I really dig the little reverse hand carve thing too (the scalloped area on the back of the guitar)...nice work!

_________________
http://www.PeakeGuitars.com
Top
 Profile  
 
BobK
PostPosted: Sun May 09, 2010 8:45 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Jul 02, 2006 2:57 am
Posts: 449
Location: United States
I cut a test top this afternoon. I really like the shape from the middle pickup and higher, but I'm not sure about the lower half. The carve "feels" a little too abrupt. I didn't want something that looked like a simple radius, but maybe I got a little carried away with the shape. Have to stare at it for a couple of days and see if it grows on me.
Top
 Profile  
 
Parser
PostPosted: Sun May 09, 2010 9:01 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Nov 28, 2006 1:44 pm
Posts: 1105
Location: Crownsville, MD
First name: Trevor
Last Name: Lewis
City: Crownsville
State: MD
Zip/Postal Code: 21032
Country: USA
Focus: Build
Status: Semi-pro
I always figured that was one of the coolest things about CNC. It's relatively easy to make whatever it is that you want; the real question is what do you want?

_________________
http://www.PeakeGuitars.com
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 

Board index » CNC and Lutherie

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com