***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Oct 31, 2024 7:36 pm


Board index » CNC and Lutherie

All times are UTC - 5 hours





Post new topic Reply to topic  Page 1 of 1
  [ 4 posts ] 
  Print view Previous topic | Next topic 
Author Message
DanielC
PostPosted: Fri Oct 24, 2008 12:30 pm 
Offline
Walnut
Walnut

Joined: Tue Jun 17, 2008 6:44 pm
Posts: 6
Will something like an epilog laser machine cut regular thin pearl for inlay? If not what is the best small cnc machine for cutting pearl for inlaying?, perferably one that is enclosed. thanks
Top
 Profile  
 
Michael Dale Payne
PostPosted: Fri Oct 24, 2008 1:07 pm 
Offline
Old Growth Brazilian
Old Growth Brazilian

Joined: Tue Dec 28, 2004 1:56 am
Posts: 10707
Location: United States
It will cut it but it burns the edges and causes it to powder about 1/32-3/64 of an inch at the cut edge so for precise edge cutting no Use water jet, CNC or good old jewelers saw.
Top
 Profile  
 
Bob Garrish
PostPosted: Fri Oct 24, 2008 1:25 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Tue May 02, 2006 9:02 am
Posts: 2351
Location: Canada
First name: Bob
Last Name: Garrish
City: Toronto
State: Ontario
Country: Canada
Status: Professional
Depends on what you mean by 'best'. If price is the determining factor, the K2CNC stuff can be adapted to your needs.

_________________
Bob Garrish
Former Canonized Purveyor of Fine CNC Luthier Services
Top
 Profile  
 
John Watkins
PostPosted: Tue Oct 28, 2008 3:13 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Jun 23, 2005 7:46 am
Posts: 580
Location: United States
First name: John
Last Name: Watkins
City: Lake Zurich
State: IL
Focus: Build
Status: Professional
Hard to beat the Haas Office Mill for that kind of work. It'll fit through a standard 36" doorway, has a toolchanger, coolant pump, comes standard with a 50,000 rpm spindle, and is dirt cheap (relatively speaking).

_________________
John Watkins
CNC Guitar Parts
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 4 posts ] 

Board index » CNC and Lutherie

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 5 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com